Archivio

WTW Oxi 296 TRS

Seriennummer: 011473
Stato: Archived Product?The unit is no longer available.
Spedizione:
Descrizione:
WTW Oxi trasmettitore 296 TRS. Anno: 2001 Prezzo originale: 1.049, - Euro.
siehe Storeview
Maggiori Informazioni
Objektnummer B00011473
Seriennummer 011473
Nome oggetto WTW Oxi 296 TRS
Stato Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

 

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

 

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

 

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country

Possible payment methods

Comment

DE, AT, CH

Payment by invoice, payment in advance, payment by credit card

Payment by invoice is only possible for corporate clients.

NL, BE, LU

Payment by invoice, payment in advance, payment by credit card

Payment by invoice is only possible for corporate clients

Other countries

Payment in advance, payment by credit card

 

 

Our General Terms of Sale, Delivery and Payment are valid and are available for download here. 

The goods are offered subject to prior sale.

 

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status

Condition

Comment

Immediately available

Used The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock

Used

The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.

Published

Used

The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.

New device

new

The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.

Labprocure

Used

Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma:              WTW

Modell:            Oxi 296 TRS

Kommentar:    Dokumente dt.

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

Anzeige

Meßwert                                            LCD 7-Segment

                                                         •   O 2 3½-stellig

                                                           • Temperatur 4-stellig

Einheiten, Einstellungen                   Symbole

O 2 -Messung

Signaleingang                                   niederohmig

Anzeige- und Meßbereich                 0,0 bis (20) 60 mg/l; 0 bis (200) 600% abhängig vom            Sensortyp

Meßwertauflösung                            0,1 mg/l, 0,01 mg/l; 1%, 0,1% abhängig vom Sensortyp

Genauigkeit                                       ± 1% vom Messwert ± 1 Digit

automatische Temperatur-               NTC - 5 bis + 100°C

kompensation

manuelle                                           •   Luftdruck: 500 mbar bis 1100 mbar

Luftdruckkompensation                    •   Ortshöhe: - 698 m bis 5573 m

Referenztemperatur                         + 20°C

Kalibrierung                                       Luftkalibrierung nach OxiCal-Verfahren

Kalibrierbereich                                 Steilheit 0,5 bis 1,4

Temperaturmessung

Temperatur-Sensor                          NTC integriert im Sensor

Genauigkeit                                       ± 0,2 K ± 1 digit

                                                         zusätzliche Feinjustierung um ± 0,5 K

Auflösung                                          0,1 K

Ein- / Ausgänge

digitale Schnittstelle                          RS-485; 2(3)-Draht-Verbindung

                                                         Busbetrieb mit bis zu 31 Einheiten möglich

Kontaktausgänge                              SENS-CHECK-Relais             schließt bei Sensordefekt

                                                         Relais 1/ Relais 2                    Funktionen, Grenzwert

                                                         •   max.Schaltspannung            250 VAC

                                                         • max.Schaltstrom                  5 A

                                                         •   max. Schaltleistung              150 W (ohmsche Last)

Signalausgänge                                0/4 bis 20mA; galvanisch getrennt; Schreiberbereiche und   Schreiberdämpfung über Software einstellbar

                                                         • Grundgenauigkeit                  0.1%

                                                         • Bürde                                    max. 600 Ohm

                                                         • Bürdeneinfluß                        < 0.1 %

Anschlußklemmen                            zugänglich an der Geräterückwand

                                                         Anschlußquerschnitt 0.5 bis 2.5 mm²

                                                         •   Netz                                       2 polig

                                                         •   Relais                                    1/2 je 2 polig

                                                         •   SENS Check                         2 polig

                                                         •   RS-485                                  3 polig

                                                         •   Schreiberanschlüsse            je 2 polig

                                                         •   Sensor                                  7 polig

Schutzart

Blitzschutz                                        •   Grobschutz 90 V / 1.5 KA (8/20µs)

(Ein- und Ausgänge)                         •   Feinschutz 600 Watt

Elektrischer Geräteschutz                Schutzklasse 2 nach IEC 1010

Gehäuse                                           IP 54

Elektrische Anschlußdaten

Spannungsversorgung                     • 230 VAC (– 15% + 10%)

(je nach Geräteausführung)             • 115 VAC (– 15% + 10%)

                                                         • 24 VAC (– 15% + 10%)

                                                         • 24 VDC (– 30% + 20%)

Frequenz                                          48 bis 62 Hz

Leistungsaufnahme                          max. 18 Watt

Prüfzeichen                                      UL, cUL (für 115 VAC, 24 VAC und 24 VDC)

                                                         CE (für alle Versorgungsspannungen)

Funkentstörung                                 nach EN 50081-1

Störfestigkeit                                     nach EN 50082-2, Namurempfehlungen

Umgebungstemperatur

Grenzbetriebsbereich                       – 25 °C bis + 55 °C

Lagerung- und

Transporttemperatur                        – 25 °C bis + 65 °C

Mechanische Daten

Abmessungen                                  96 x 96 x 168 mm (B x H x T)

Gewicht                                             ca. 1,1 kg

Tastaturfolie (Material)                      Polyester

Gehäuse (Material)                           glasfaserverstärktes Noryl

Gruppo prodotti: Misuratori Ossigeno

Non è stato trovato alcun prodotto corrispondente alla selezione.
Back to Top
part-of-labexchange-group
Search engine powered by ElasticSuite
Labprocure