Back to Top
Archivio
WTW Cond340i
Descrizione:
WTW conducibilità Cond340i. Senza cella di misura. Orignalverpackung.
siehe Storeview
| Objektnummer | B00010070 |
|---|---|
| Seriennummer | 010070 |
| Nome oggetto | WTW Cond340i |
| Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Technische Daten
Abmessungen und Gewicht |
||
|
|
Länge [mm] |
172 |
|
|
Breite [mm] |
80 |
|
|
Höhe [mm] |
37 |
|
|
Gewicht [kg] |
ca. 0,3 |
Mechanischer Aufbau |
||
|
|
Schutzart |
IP 66 |
Elektrische Sicherheit |
||
|
|
Schutzklasse |
III |
Prüfzeichen |
||
|
|
GS, cETLus, CE |
|
Umgebungsbedingungen |
||
|
|
Lagerung |
-25°C... +65°C |
|
|
Betrieb |
-10°C ... +55°C |
|
|
Klimaklasse |
2 |
Meßbereiche |
||
|
|
H [µS/cm] |
0,000... 1.999 (nur bei Zellenkonst. = 0,090 ... 0,110 cm -1 ) 0,00 ... 19,99 (nur bei Zellenkonst. = 0,010 cm -1 und Zellenkonst. = 0,090 ... 0,110 cm -1 ) 0,0 ... 199,9 0 ... 1999 |
|
|
H [mS/cm] |
0,00. ..19,99 0,0 ... 199,9 0 ... 500 |
|
|
spez. Widerstand [MΩ*cm] |
0,000... 1,999 0,00 ... 19,99 0,0 ... 199,9 0 ... 1999 |
|
|
SAL |
0,0 ... 70,0 nach IOT-Tabelle |
|
|
TDS [mg/l] |
0 ... 1999 Faktor einstellbar zwischen 0,40 ... 1,00 |
|
|
T [°C] |
-5,0 ... +105,0 |
|
Genauigkeit (± 1 digit) |
||
|
|
H |
Nichtlineare Kompensation nLF: Genauigkeit Meßguttemperatur ± 0,5% 0°C...35°C nach EN 27 888; ± 0,5% 35°C ... 50°C erweiterte nLF- Funktion nach WTW- Messungen Lineare Kompensation Lin: Genauigkeit Meßguttemperatur ± 0,5% 10°C ... 75°C (der Prozentwert der Genauigkeit bezieht sich jeweils auf den Meßwert!) |
|
|
SAL |
Bereich 0,0 ... 42,0 Genauigkeit Meßguttemperatur ± 0,1 5°C ... 25°C ± 0,2 25°C ... 30°C |
|
|
TDS [mg/I] |
1 |
|
|
T [°C] |
NTC 30: Genauigkeit ±0,1 PT 1000: Genauigkeit Betriebstemperatur ± 0,5 0°C ... 15°C ± 0,1 15°C...35°C ±1 35°C ... 55°C |
Zellenkonstante kalibrieren |
||
|
|
C [cm -1 ] |
0,450 ... 0,500 0,800 ... 1,200 |
Zellenkonstante einstellen |
||
|
|
C [cm -1 ] |
0,010 fest 0,090 ... 0,110 0,250 ... 2,500 |
Referenztemperatur |
||
|
|
Tref |
einstellbar 20°C oder 25°C |
Temperatureingabe |
||
|
|
Manuell [°C] |
-5 ... +100 |
|
Analogausgang (nur Cond 340i) |
||
|
|
Automatische Umschaltung bei Anschluss des Schreiberkabels AK 323. |
|
|
|
Ausgangssignal |
0 ... 1,999 V für Bereichspanne 0 ... 1999 Digit |
|
|
Genauigkeit |
± 0,5 % vom Anzeigewert |
|
|
Innenwiderstand |
< 5 Ohm (Strombegrenzung auf max. 0,2 mA Ausgangsstrom) |
|
Serielle Schnittstelle (nur Cond 340i) |
||
|
|
Automatische Umschaltung bei Anschluss eines PCs oder eines Druckers über das Kabel AK 340/B oder AK 325/S. |
|
|
|
Typ |
RS232, Datenausgabe |
|
|
Baudrate |
einstellbar 1200, 2400, 4800, 9600 Baud |
|
|
Datenbits |
8 |
|
|
Stoppbit |
2 |
|
|
Parität |
keine (None) |
|
|
Handshake |
RTS/CTS+Xon/Xoff |
|
|
Kabellänge |
max. 15 m |
Energieversorgung |
||
|
|
Batterien |
4 x 1,5 V Alkali-Mangan-Batterien Typ.AA |
|
|
Laufzeit |
ca. 3000 Betriebsstunden |
|
|
Netz |
Für alle Steckernetzgeräte gilt: Anschluß max. Überspannungskategorie II Steckernetzgerät mit Euro-Stecker: FRIWO FW1199, 11.7864 Friwo Part. No. 1762613 Input: 230 V ~ / 50 Hz / 5,6 VA Output: 12 V = / 130 mA / 1,56 VA
Steckernetzgerät mit US-Stecker: FRIWO FW1199, 11.7880 Friwo Part. No. 1794043 Input: 120 V ~ / 60 Hz / 6 VA Output: 12 V = / 150 mA
Steckernetzgerät mit UK-Stecker: FRIWO FW1199, 11.7872 Friwo Part No. 1816491 Input: 230V ~ / 50 Hz / 5,6 VA Output: 12 V = / 130 mA / 1,56 VA |
Angewendete Richtlinien und Normen |
||
|
|
EMV |
EG-Richtlinie 89/336/EWG EN 61326 A1:1998 EN 61000-3-2 A14:2000 EN 61000-3-3:1995 FCC Class A |
|
|
Gerätesicherheit |
EG-Richtlinie 73/23/EWG EN 61010-1 A2:1995 |
|
|
Klimaklasse |
VDI/VDE 3540 |
|
|
Schutzart |
EN 60529:1991 |
Gruppo prodotti: Misuratori Conducibilità
Domande?
Il tuo Labexchange-Team sarà lieto di aiutarvi:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
