Vacuubrand MD 4C
Objektnummer | B00017268 |
---|---|
Seriennummer | 017268 |
Nome oggetto | Vacuubrand MD 4C |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
xmlns:st1="urn:schemas:contacts" xmlns:st2="urn:schemas-microsoft-com:office:smarttags"
manufacturer: Vacuubrand
model: MD 4C
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Technical data
Pumping unit
Max. pumpingspeed 50/60 Hz 3.0 m3/h
Ultimate (total) vacuum (absolute) 2 mbar
Ultimate (total) vacuum (absolute) 15 mbar
withgas ballast
Max. permittedoutlet pressure (absolute) 1.1 bar
Max. permittedpressure at inert gas 1.2 bar
connection(absolute)
Ambient temperature range (operation) 0 °C to +40 °C
Max. permittedrelative atmospheric moisture 30% to 90%
(operation)
Degree of protection DIN 40050 IP 20
Inlet hose nozzleI.D.10 mm
Outlet hose nozzleI.D.10 mm
Overall dimensions L x W x H
PC 610 400 mm x 251 mm x 536 mm
PC 611 435 mm x 264 mm x 536 mm
PC 620 435 mm x 369 mm x 538 mm
MD 4C + AK + EK 337 mm x 251 mm x 500 mm
MD 4C + AK Synchro + EK 336 mm x 264 mm x 500 mm
Mass
PC 610 24.3 kg
PC 611 24.5 kg
PC 620 26.9 kg
MD 4C + AK + EK 19.3 kg
MD 4C + AK Synchro + EK 19.7 kg
MD 4C
Motor power 200 W
Rated current draw:
100V~ ** 50/60 Hz 3.6/3.6 A
120V~ *** 60 Hz 3.3 A
230V~ ** 50/60 Hz 1.5/1.9 A
CVC 2II
Pressure units/scale (to be switched between)mbar, Torr or Pascal
Measurement range 1 mbar 1300 mbar (1 Torr 975 Torr)
Control range 1 mbar 1060 mbar (1 Torr 795 Torr)
Uncertainty (with transducer carefully < ± 2 mbar (1.5 Torr)
calibratedand at constant temperature)
Temperature coefficient < ± 0.2 mbar / K (0.15 Torr / K)
Long term zero shift < ± 4 mbar (3 Torr)
(dueto temperature variation)
Max. permittedpressure at vacuum inlet 1600 mbar (1200 Torr)
(absolute)
Max. temperatureof gaseous media for short periods up to 80°C
Vacuum connection stepped hose nozzle (PBT) for vacuum hoses with
6 10 mm I.D.
Air admittance valve electromagnetic, integrated, with hose nozzle
forinert gas supply
Power draw max.13 VA
Power out (male connector) isolation valve VV 6C or VV 15C
designatedfor simultaneous Operation water valve 24V
(parallelconnection) with the following Vacuum Management System Modul A original accessories:
Components Wetted parts
Pumping unit
Outlet PBT
Inlet PBT or PE
Hose PTFE
Fitting ETFE
0ring at the catchpot UM (e.g. Viton)
Overpressure safety relief device Silicon rubber
catchpotcover plate PE
Valve block PE / PTFE
Exhaust walte vapour condenser;
roundbottom flask Borosilicate glass; borosilicate glass coated Isolation valve PVDF, FFK1vl (e.g. Kalrez)
MD 4C
Housing cover insert PTFE, carbon reinforced
Head cover ETFE/PPS
Diaphragm clamping disc ECTFE (e.g. Halar) on stainless steel
Valve FFKM (e.g. Kalrez)
Diaphragm PTFENBR (e.g. Perbunan) Sandwich
CVC 2II
Sensor connecting tube (internal) PVC
Sensor housing Nickelironalloy, gold tin solder
Sensor Gold, silicon
Optional equipment:
Vakuum Management System VMS Modul A
Technical Data |
||
VMS Modul A |
3,5 A |
8 A |
Mains supply |
100-240V, 50 60Hz |
100-240V, 50 60Hz |
Max. power drax |
840 VA |
1920 VA |
Degree of protection DIN 40050 |
IP 20 |
IP 20 |
Ambient temperature range (operation) |
10°C bis 40°C |
10°C bis 40°C |
Max. permitted power draw at the vacuum pump connection (ohmic and inductive) |
3,5 A |
8 A |