Back to Top
Archivio
Vacom SRS-RGA 200
Descrizione:
siehe Storeview
| Objektnummer | B00014299 |
|---|---|
| Seriennummer | 014299 |
| Nome oggetto | Vacom SRS-RGA 200 |
| Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Vacom
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
The SRS family of RGAs is ideal for applications involving gas analysis, leak detection, and vacuum processing. We offer 100, 200 and 300 amu systems with supporting Windows software and options that include an electron multiplier and a built-in power module for AC line operation.
|
Specifications |
|
|
Operational |
|
|
|
|
|
Mass range |
|
|
RGA100 |
1 to 100 amu |
|
RGA200 |
1 to 200 amu |
|
RGA300 |
1 to 300 amu |
|
Mass filter type |
Quadrupole |
|
Detector type |
Faraday cup (FC)standard, electron multiplier (EM)optional |
|
Resolution |
Better than 0.5 amu @ 10 % peak height (per AVS std. 2.3). Adjustable to constant peak width throughout the mass range. |
|
Sensitivity (A/Torr) |
2 × 10 -4 (FC), <200 (EM). User adjustable throughout high voltage range. Measured with N 2 @ 28 amu with 1 amu full peak width, 10 % height, 70 eV electron energy, 12 eV ion energy, and 1 mA electron emission current. |
|
Minimum detectable partial pressure |
5 × 10 -11 Torr (FC). 5 × 10 -14 Torr (EM). Measured with N 2 @ 28 amu with 1 amu full peak width, 10 % height, 70 eV electron energy , 12 eV ion energy, and 1 mA electron emission current. |
|
Operating pressure |
10
-4
Torr to UHV (FC) |
|
Max. operating temp. |
70 °C |
|
Bakeout temperature |
300 °C (without ECU) |
|
Ionizer |
|
|
Design |
Open ion source, cylindrical symmetry, electron impact ionization. |
|
Material |
SS304 construction |
|
Filament |
Thoriated-iridium (dual) with firmware protection. Built-in 1 to 10 W degas ramp-up. Field replaceable. |
|
Electron energy |
25 to 105 V, programmable |
|
Ion energy |
8 or 12 V, programmable |
|
Focus voltage |
0 to 150 V, programmable |
|
Electron emission current |
0 to 3.5 mA, programmable |
|
General |
|
|
Probe dimension |
8.75" from flange face to top of ionizer |
|
Probe insertion |
2.0" |
|
Probe mounting flange |
2.75" CF |
|
Minimum tube I.D. |
1.375" |
|
ECU dimensions |
9.1" ×4.1" × 3.1" (WHL) Easily separated from the probe for bakeout. |
|
LED indicators |
Power ON/OFF, filament ON/OFF, degas ON/OFF, electron multiplier ON/OFF, RS-232 Busy, Error, Overpressure, Burnt Filament. |
|
Warm-up time |
Mass stability ±0.1 amu after 30 minutes |
|
Computer interface |
RS-232C, 28,800 baud with high-level command set |
|
Software |
Windows based application |
|
Power requirement |
24 VDC @ 2.5 amps. Male DB9 connector. Optional 110/120/220/240 VAC adapter. |
|
Weight |
6 lbs. |
|
|
|
ATMION® Standard Weitbereichsvakuummeter
Aktives Vakuummeter, optimiert für den Einsatz in Forschung und Entwicklung, mit Bayard-Alpert und Pirani-Sensor für die Messung von Atmosphäre bis Ultrahochvakuum
Hohe zulässige Ausheiztemperatur
Austauschbare Filamente des Bayard-Alpert-Sensors
Wirtschaftliche Alternative zu zwei einzelnen Sensoren
Bewährte Technologie
Sicherer, controllergesteuerter Betrieb
Langlebige Filamente durch intelligente Emissionsstromregelung
Genaue, zuverlässige Messung mit hoher Reproduzierbarkeit und Stabilität, auch im
Übergangsbereich der Sensor-Kennlinien
Kurze Reaktionszeiten
Messkopf leicht und schnell austauschbar, einfache Neukalibrierung
Werkskalibrierung
Sensor-Entgasung durch Elektronenstroßheizung
Einfache Integration in Anlagensteuerungen durch serielle Schnittstelle und
optionale Profiaus-Schnittstelle
Optionale Messwertanzeige mittels PC, ATMIGRAF oder MVC3
Technische Daten
Messbereich 1000 bis 1 x 10 -10 mbar
Messprinzipien Heißkathoden-Ionisation nach Bayard-Alpert /
Wärmeleitung nach Pirani (temperaturkompensiert)
Umschaltung zwischen automatisch
den Messprinzipien Pirani --) BA bei 1 x 10 -2 mbar
BA -> Pirani bei 1 x 10 -1 mbar
(Anpassung der Umschaltpunkte ist möglich)
Messgenauigkeit ± 25 % des Messwertes bei 10 bis 1 x 10 -2 mbar
± 10 % des Messwertes bei 1 x 10 -2 bis 1 x 10 -8 mbar
Betriebstemperatur 10 bis 40 °C
Ausheiztemperatur max. 250 °C am Flansch (Elektronik demontiert)
Medienberührende Edelstahl, Aluminiumoxid, Wolfram
Materialien
Material Piranidraht Platin
Material Filamente Iridium, yttriumoxidbeschichtet
Anzahl Filamente 2
Einbaulage beliebig
Analogausgang log-linear, 0 bis 10 V DC (0,625 V / Dekade)
Schnittstellen RS-232, optional Profibus
Schaltpunkte 1 Transistorausgang, max. 24 VDC/ 0,2 A
Betriebsspannung 24 V DC
Leistungsaufnahme max. 10 W, Degas max. 22 W
Elektrischer Anschluss Sub-D-Stecker, 15-polig
Gewicht ca. 1,6 kg
Schutzart 1P40
Betriebsgeräte ATMIGRAF, MVC3
ATMIGRAF Anzeige- und Betriebsgerät
Anzeige- und Betriebsgerät für ein aktives Weitbereichsvakuummeter ATMION®
Kostengünstig, kompakt, einfach und zuverlässig
Stromversorgung des Vakuummeters (24 V DC) über die Messleitung
Folgende Vakuummeter-Ausgänge werden als Geräte-Ausgänge bereitgestellt:
Analogsignal des Vakuummeters
Transistor-Schaltausgang
Serielle Schnittstelle zur Steuerung des Vakuummeters
Technische Daten
Anzahl der Kanäle 1
Anzeigebereich 1000 bis 1 x 10-10 mbar
Anzeige LED, 4 -stellig (2 x Mantisse, 2 x Eponent), grün
Maßeinheit mbar
Schaltpunkte 1 Schließerkontakt, max. 24 V DC, 1 A
Analogausgang log-linear, 0 bis 10 V DC (0,625 V / Dekade)
Schnittstellen RS-232 (Sub-D, 9-polig)
Umgebungstemperatur 0 bis 40 °C
Betriebsspannung 24 V DC
Steckernetzteil Schaltnetzteil, In 90 - 250 V AC, Out 24 V DC,
EU-Stecker
Gehäuse Aluminium, 1/4 x 19", 2 HE
Gewicht ATMIGRAF: 0,5 kg; Steckernetzteil: 0,1 kg
Lieferumfang ATMIGRAF, Steckernetzteil
Anschließbare Sensoren ATMION® Compact, ATMION® Standard
Gruppo prodotti: Analizzatori-Misuratori di Gas
Domande?
Il tuo Labexchange-Team sarà lieto di aiutarvi:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
