Soldé

Uniequip Univapo 100 H

Seriennummer: 008893
Status: Archived Product
Preis auf Anfrage
Excl. 19% VAT , excl. Shipping Cost
siehe Storeview
Descrizione:
UniEquip modello centrifuga vuoto Univapo 100 H. Per la concentrazione vonProben sotto vuoto. . Con trappola fredda Unijet II Anno: 1998 Prezzo originale: 4,522, - Euro.
Quotation
siehe Storeview
Maggiori Informazioni
Objektnummer B00008893
Seriennummer 008893
Nome oggetto Uniequip Univapo 100 H
Stato Archived Product

Gruppo prodotti: Centrifughe diverse

Non è stato trovato alcun prodotto corrispondente alla selezione.

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

 

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

 

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

 

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country

Possible payment methods

Comment

DE, AT, CH

Payment by invoice, payment in advance, payment by credit card

Payment by invoice is only possible for corporate clients.

NL, BE, LU

Payment by invoice, payment in advance, payment by credit card

Payment by invoice is only possible for corporate clients

Other countries

Payment in advance, payment by credit card

 

 

Our General Terms of Sale, Delivery and Payment are valid and are available for download here. 

The goods are offered subject to prior sale.

 

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status

Condition

Comment

Immediately available

Used The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock

Used

The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.

Published

Used

The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.

New device

new

The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.

Labprocure

Used

Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma:              Uniequip

Modell:            Univapo 100 H

Kommentar:   Dokumente dt.

Neues Modell 100 ECH mit elektronischer Steuerung für Zeit und Temperatur und mit Vakuumsteuerung

Das UNIVAPO 150 ECH und 100 ECH-Zentrifugen konzentriert schnell Proben bei der niedrigen Temperatur im Vakuum-festen Rotorraum. Verdampfung der lösenden Phase kann oben beschleunigt werden, indem man die Raumtemperatur von 30°C bis zu 80°C aufwirft.

Die voreingestellte Rotationsgeschwindigkeit des magnetisch gefahrenen Rotors entwickelt die optimale zentrifugale Kraft für alle vorhandenen Rotoren. Diese Gravitationskraft verhindert Stoßen, Schäumen und Spritzen von der Lösung, damit praktisch 99% der Probe konzentriert und zurückgewonnen wird.

Anwendungsbereiche: Für Vorbereitungen mit einer maximalen Wiederaufnahme von DNA, RNS, Proteine, Peptide, Aminosäuren, Hormone, Enzyme. Für Analyse nach RIA, FIA, TLC, FPLC, HPLC, GC/MS, IR, UV und Elektrophorese.

Ein total beiliegender Formraum ist das Doppelte, das mit einem speziellen Dichtungsmittel und mit Korrosion nachgewiesener Puderfarbe versiegelt wird. Der Rotor wird magnetisch gefahren und angeschlossen nicht direkt an den Motor.

Bewegungs-Antrieb: Der Motor ist im untereren Abschnitt und überträgt Energie durch eine magnetische Koppelung. Der Abschnitt ist über die untere Grundplatte bereitwillig zugänglich.

Heizung: Eingebaute röhrenförmige Artheizung (300 W) mit örtlich festgelegtem Thermostat (40°C) und elektronische überschüssige Temperatursteuereinheit (Version H) oder Temperaturspanne von 30°C zu 80°C (Version ECH).

Abkühlen: Vorhanden als Optionen! Im untereren Abschnitt des Rotorraumes können die Kühlschlangen für das Verteilen der außen abgekühlten Flüssigkeiten gepaßt werden.

Kontrollen: Ein-Ausschalter für Motor-Energie und für die Heizung, Sicherheitsschalter, geschlossene Abdeckung während des Betriebes sicherzustellen. Digitalanzeige für Heizung und Zeit (Version ECH).

VakuumcLinie: Ein Zwei-wegmetallvakuumventil wird in die Rückseite des oberen Abschnitts mit Vakuum-Linienanschluß 1/2"angebracht (der linke und rechte Anschluß möglich).


Weitere Optionen:

  • Teflonüberzogener Rotorraum.
  • Automatisches Abblasventil führt Luft in den Rotorraum ein
  • Kappensicherheitskreis

UNIVAPO 100H

(100ECH)

UNIVAPO 150CH

(ECH)

Maße (WxDxH)

290x370x295

Millimeter

340x400x370

Millimeter

Gewicht

16 Kilogramm Netz

23 Kilogramm Netz

Energie

220 Volt, 50/60 Hz oder 110 Volt, 60 Hz

Rotorausrüstung: UNIVAPO 100ECH und 150ECH

Scheibenrotoren für

UNIVAPO 100 ECH + H

Scheibenrotoren für

UNIVAPO 150 ECH + H

72-11 für Eppendorf-Schläuche

144-11 für Eppendorf-Schläuche

40-13 für Glasphiolen 12/13-

Millimeter-Durchmesser

76-13 für Glasphiolen 12/13­

Millimeter-Durchmesser

24-18 für Glasphiolen 18-

Millimeter-Durchmesser

46-18 für Glasphiolen 18­

Millimeter-Durchmesser

Millimeterdurchmesser

Millimeterdurchmesser

SOR-Schwingen-heraus-Rotor für 4

microtiterplatten + SOR für zwei

deepwellplates + reparierte Rotor

für vier deepwellplates

Part of labexchange logo
Search engine powered by ElasticSuite