Tecan SpectraFluor Plus
Objektnummer | B00018170 |
---|---|
Seriennummer | 018170 |
Nome oggetto | Tecan SpectraFluor Plus |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Manufacturer: Tecan
Model: Spectrafluor pl
The SPECTRAFLUOR PLUS is a fully automatic, computer controlled fluorometer for measuring samples in a microplate. The instrument fulfills the requirements for numerous fluorescence, absorbance and glow type luminescence applications in research and routine investigations.
The filters are arranged in filter slides; four excitation filters and four emission filters respectively. The instrument has no on-board software and is exclusively controlled via an external computer using WindowsTMformat.
1 = power LED
2 = emission filter
3 = excitation filter
4 = plate carrier
Instrument Features
General
The following types of measurement are provided with the SPECTRAFLUOR PLUS microplate reader.
Measurement Type Read Mode Microplates to be Used
Fluorescence Standard and time- 6 - 1536 wells
resolved, top and bottom
Absorbance Single and dual ≤ 384 wells
wavelength
Glow type luminescence 96 wells
The table below lists the technical specifications for the instrument.
Parameters Characteristics
Measurement Software controlled
Interface Serial interface: RS 232
Filter handling External filter exchange
4 excitation filters and 4 emission filters in separate filter slides.
Up to 8 excitation and emission filter slides can be defined when using software.
Plate definition Via scanning software
Temperature control From ambient +5°C up to 42°C
Plate shaking Orbital or linear shaking - both offer 3 speeds
Light source High energy Xenon flash lamp
Optics Quartz fibers and lenses
Detector Side window, low dark current photomultiplier tube
Power supply Auto-sensing:100-120V / 220-240V 50/60 Hz
Power consumption 200 VA
Main fuse T 2A / 250 (slow blow)
Physical
Outer dimensions Width: 380 mm
Depth: 415 mm
Height: 170 mm
Weight 18.8 kg
Environmental
Ambient temperature
Operation 15°C 30°C 59°F- 86°F
Non-operation -20°C -+60°C-4°F - +140°F
Relative humidity
Operation 90% non-condensing
Overvoltage category II
Pollution degree 2
Usage Commercial
Noise level < 70 dBA
Method of disposal Electronic waste (infectious waste)
Fluorescence
Parameters Characteristics
Sensitivity ≤ 1.5 pg fluorescein / well (200 µl / well) or ≤ 4 fmol / well
in a Greiner 96 well black plate using 100 flashes / well
Wavelength Range 230 - 700 nm
Standard Filters Wavelength Band Width1)
Excitation 1. 360nm 35nm
2. 430nm 35nm
3. 485nm 20nm
4. 590nm 20nm
Emission 1. 465nm 35nm
2. 535nm 25nm
3. 595nm 35nm
4. 635nm 35nm
Read Mode Top and bottom (bottom for transparent plates)
Integration Time2) 20 - 2000 µs
Lag Time2) 0 - 2000 µs
1) Band width for standard filters may have some tolerance ±10%
2) Needs to be adjusted for Time Resolved Measurements. Lag Time is typically ≥ 40µs
Gain setting Values Measurement range
Manual 1 -255 0 - 60,000 RFU
Optimal Automatic 0 - 60,000 RFU
Extended Dynamic Automatic 0 - 6,000,000 RFU
Range (using XFLUOR)
No. of Definition Characteristic Meas. Time for Flashes/ Well 96 Wells
1 - 3 Plate carrier does not stop max. speed ≤ 30 sec
at the measurement point
(on the fly)
4-255 Plate carrier stops at the max. precision Dependent on the meas. point flash parameter setting
Absorbance
The specifications only apply to 96 well plates.
Absorbance can not be measured in 1536 well plates.
The absorbance filters are not within the instrument's standard configuration.
Parameters Characteristics
Wavelength range 230 - 750 nm
Meas. range 0-3 OD
Resolution 0.0001 OD
Accuracy 0 - 2.0 OD ± 2.0 % and ± 0.010 OD 492 nm
Precision 0 - 2.0 OD ± 2.0 % and ± 0.005 OD 492 nm
Linearity 0 - 2.0 OD ± 2.0 % 492 nm
0-1.5 OD ± 2.0 % 260/340 nm
Standard filters 405 nm / 450 nm / 492 nm / 620 nm
(not included in standard delivery)
Glow Type Luminescence
The specifications only apply to 96 well plates.
Luminescence can only be measured in 96 well plates.
Parameters Characteristics
Sensitivity < 0.4 10-6DEA activity units/well of molecular biology grade alkaline phosphatase (20 µl/well) using CDP-Star (Tropix) chemiluminescent substrate mix with Emerald-II enhancer (100 µl/well) in a Greiner 96 well white plate. Use of the cover plate greatly reduces the cross-talk.
0.4 10-6DEA activity units/well correspond to 200 fg/well of alkaline phosphatase when using a lot of 2000 DEA activity units/mg protein.
Wavelength range 400 - 700 nm
Gain Optimal: preset value
Manual: 1 -255
Integration setting Integration time Measurement range
Manual 1 - 5000 ms 0 - 55,000 RLU
Maximum Dynamic automatic (1 - 1000 ms) 0 - 55,000,000 RLU
Range (using XFLUOR)