Back to Top
Archivio
Tecan Freedom 200
Descrizione:
Tecan Freedom EVO 200 230 V 50/60 Hz, 1200 W. Con Tecan Tecan Torre e Carosello 5646 WCR 96 Carosello 9x96 con vassoi. 8 pipettaggio con 8 pompe e siringhe. 1-96 posizioni. Software: 615.060 Gemelli Advanced Software versione 3.20, l'aggiornamento software V4.2 SP1, il software dello strumento 4.7. Marchio CE. Costruito nel 2004.
siehe Storeview
| Objektnummer | B00020207 |
|---|---|
| Seriennummer | 020207 |
| Nome oggetto | Tecan Freedom 200 |
| Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Firma: Tecan
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Introduction
The Genesis Freedom is designed for automating routine laboratory tasks. The instrument consists of a platform (frame, housing, main electronic boards and power supply) that is available in three different sizes (approximate instrument length of 100, 150 or 200 cm). The platform may be placed onto a cabinet and can be equipped with maximally three robotic arms (two for size 100) in several combinations. The following robotic arms are available:
Li quid Ha ndling Arm (LiHa) for liquid pipetting tasks
Ro botic Ma nipulator Arm Standard (RoMa Standard) for plate handling on the platform worktable
Ro botic Ma nipulator Arm Long (RoMa Long) with long Z-axis for plate handling on and underneath the worktable (e.g. for loading a centrifuge placed underneath the instrument)
P ick and P lace Arm (P&P) for tube handling
Optionally, Instruments like for example a centrifuge or microplate reader can be placed in the cabinet underneath the worktable.
Technical Data
Instrument Overall Dimensions
Weights
Freedom 100 Freedom 150 Freedom200
Platform 106 kg / 233 lbs 125 kg / 275 lbs 175 kg / 385 lbs
LiHa 8 kg / 18 lbs 8 kg 18 lbs 8 kg 18 lbs
RoMa Standard and Gripper 6 kg / 13 lbs 6 kg 13 lbs 6 kg 13 lbs
RoMa Long and Gripper 8 kg / 18 lbs 8 kg 18 lbs 8 kg 18 lbs
P&P and Gripper 6 kg / 13 lbs 6 kg 13 lbs 6 kg 13 lbs
PosID 2 Option 8 kg / 18 lbs 11 kg / 24 lbs 14 kg / 31 lbs
MPO or FWO 2 kg / 4.4 lbs 2 kg / 4.4 lbs 2 kg / 4.4 lbs
Packing 35 kg / 77 lbs 47 kg / 104 lbs 71 kg / 156 lbs
Worktable Dimensions
Freedom 100 Freedom 150 Freedom 200
Accessible X-range 745 mm 1120 mm 1720
(X-travel) (29.3") (44.V) (67.7")
Accessible Y-range 418 mm 418 mm 418 mm
(Y-travel) (16.5") (16.5") (16.5")
Grid positions an worktable 30 45 69
Worktable cutout for centrifuge : 200 x 260 mm
Worktable cutout for reader : 252 x 150 mm
The RoMa Long reaches maximally 350 mm underneath the worktable.
Supply Ratings
Freedom 100 Freedom 150 / 200
Line Voltage 100 - 240 V AC 100 - 240 V AC
Frequency 50 / 60 Hz 50 / 60 Hz
Power 800 VA 1200 VA
Equipment and Safety Class 1 1
Circuit breaker 10 A 15 A
Uninterruptible Power Supply, UPS
For an optimal Operation of Genesis Instruments and smooth running of the relevant application, TECAN recommends to connect an online UPS, so that the power supply runs via the UPS with a filter effect. A switched UPS type that switches over to batteries only after network breakdown is not recommended.
For further assistance contact your nearest TECAN representative.
Environmental Conditions
All Genesis Instruments are intended for indoor Operation and storage only. The table below aives an overview.
Operation Temperature |
15 - 32 °C / 59 - 90 °F |
|
Operation Humidity |
30-80% relative (non condensing) at 30 °C / 86 °F or below |
|
Pollution Degree |
2 |
|
Overvoltage Category |
II |
Computer Requirements
Refer to your Genesis Instrument Software Manual (Doc ID 390791) for details an minimal Computer requirements.
Software Requirements
It is strongly recommended to use the latest software versions. Please contact your nearest TECAN representative for more Information.
Genesis Instrument Software V4.4 or higher
Gemini V3.5 or higher
FACTS V4.81 or higher
Optional System Modules
According to your order configuration some of the following options might be installed. The system modules are briefly introduced below, additional optional equipment and accessories are introduced in Chapter 3 Structure and Function.
Liquid Handling Arm (LiHa)
The Genesis Freedom Instrument may be equipped with maximally one 4- or 8-Tip Liquid Handling Arm depending on the customer's order configuration.
The Liquid Handling Arm is used for pipetting actions in different volume Tanges, depending on the tip types used and the features of the liquid system (see Chapter 3 Structure and Function).
Robotic Manipulator Arm Standard (RoMa Standard)
The Genesis Freedom Instrument may be equipped with one or two Robotic Manipulator Arms.
The Robotic Manipulator Arm is used to transport objects of the format of microplates, such as reagent blocks, deep well plates, etc. to different positions on the worktable or for storage onto the shelf.
Robotic Manipulator Arm Long (RoMa Long)
The Genesis Freedom Instrument may be equipped with one or two Robotic Manipulator Arms with long Z-axis.
The Robotic Manipulator Arm with long Z-axis is used to transport objects of the format of microplates, such as reagent blocks, deep well plates, etc. to different positions on or underneath the worktable or for storage onto the shelf.
Pick and Place Arm (P&P)
The Genesis Freedom Instrument may be equipped with maximally one Pick and Place Arm.
The Pick and Place Arm is used to transport tubes to different positions on the worktable.
Positive Identification (PosID 2)
The Genesis Freedom Instrument may be equipped with a Positive Identification module.
The Positive Identification reads Barcodes on Carriers, Racks and Containers on both the primary (e.g. sample tube) as well as the secondary side (e.g. microplates).
Other Optional Modules
Depending an your applications and Order Configuration the Genesis Freedom may be equipped with several optional modules. The following list is a random extract of all possibilities:
Hettich ROTANTA 46 RSC (ROBOTIC) microplate centrifuge or another suitable centrifuge
Tecan ULTRA microplate reader or another suitable microplate reader
NPS Nano Pipetting System
Disposable Tip option
Fast Wash option, FWO
Monitored Pump option, MPO
Low Volume option
Lower DiTi Eject option
384well Microplate option
Worktables with different Gutouts for access underneath the worktable
Cabinets for placing Instruments underneath the worktable
Access Option
External Powerswitch
Gruppo prodotti: Sistemi di Pipettaggio
Domande?
Il tuo Labexchange-Team sarà lieto di aiutarvi:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
