Siemens Ultramat 22
Objektnummer | B00019087 |
---|---|
Seriennummer | 019087 |
Nome oggetto | Siemens Ultramat 22 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Siemens
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Die Gasanalysegeräte ULTRAMAT 21 P (1 Meßkanal) und 22 P (2 Meßkanäle) messen die Konzentration von Gasen wie Kohlenmonoxid (CO), Kohlendioxid (CO2), Methan (CH4), Hexan (06H14), Schwefeldioxid (SO2) und Stickstoffmonoxid (NO).
Beispiele für Anwendungsbereiche sind:
Energiesparung, Prozeß- und Sicherheitsüberwachung, Qualitätssicherung sowie Einsatz in Emissionsmeßeinrichtungen.
Die tragbaren Gasanalysegeräte ULTRAMAT 21 P und 22 P sind wahlweise mit oder ohne Kondensatabscheider lieferbar.
Ein zusätzlicher Einbaurahmen ermöglicht die Verwendung des Gerätes als 19" Einschub mit 4 Höheneinheiten (1 HE = ca. 44 mm).
1 Bedienungstaste Pumpe
2 Bedienungstaste autom. Nullabgleich
3 Bedienungstaste Umschaltung 3 h oder 12 h für automatischen Nullabgleich
4 Bedienungstaste Grenzwert
5 Strömungsmesser
6 Feinfilter
7 Sicherheitsfilter (zugänglich nach Entfernen des Feinfilterpapiers)
8,9 Digitalanzeiger zur Meßwertanzeige und Fehlermeldung
10 Einsteller für barometrischen Höhenstand (zugänglich nach Entfernen der Frontplatte mit den Schrauben 11)
11 Befestigungsschrauben der Frontplatte
15 Einstellpoteritiometer, Justierung der Steilheit
16 Grenzwerteinsteller
18* Grobfilter (zugänglich nach Abziehen des Kondenswasserbehälters 19)
19* Kondenswasserbehälter
20* Marke für höchstzulässigen Kondenswasserpegel
25* Meßgas-Eingangsstutzen
*nur bei Ausführung mit Kondensatabscheider
Die Geräte mit TÜV-Genehmigung besitzen eine abschließbare Tür, um die Tasten 1, 2, 3, 4 und die Einsteller 15 und 16 unzugänglich zu machen.
12 Netzschalter
21 Netzanschlußbuchse
22 Netzsicherung
23 Nullgas-Eingangsstutzen
24 Prüfgas-Eingangsstutzen
25 Meßgas-Eingangsstutzen, bei Ausführung ohne Kondensatabscheider
26 Meßgas-Ausgangsstutzen
27 Durchhangpotentiometer für Kanal 1
28 Durchhangpotentiometer für Kanal 2
29 Pumpenleistungspotentiometer
30 Signalausgangsstecker
Technische Daten
Anzeiger der Konzentration je Kanal
4 1/2 stellig, kommarichtig, durch 7 Segmente LED, grün‑ leuchtend
Auflösung besser als 0,2 % der Meßspanne zwischen 0 bis 20 % und 1 % zwischen 20 % bis 100 % der Meßspanne
Gerätestatus
Anwärmzustand sowie Störungen werden durch Codeziffern im Anzeigerfeld ausgewiesen. Die Bereitschaft des Gerätes wird mit 20 mA signalisiert.
Anwärmzeit
ca. 3 min
Abgleichzeit für Nullpunkt
20 s (Tabelle 2: 40 s)
Autom. Nullpunktabgleich
wahlweise alle 3 oder 12 h; bei Geräten der Tabelle 2 ist ein automatischer NullpunktAbgleich alle 3 Stunden vorgeschrieben. Bei gleichmäßiger Umgebungstemperatur ist ein Abgleich alle 12 Stunden ausreichend.
Gas für den Nullpunktabgleich
Das Gerät setzt seinen Nullpunkt auf das angebotene Nullgas. Bei den kleinen Konzentrationsbereichen muß der Inhalt der zu messenden Gaskomponente im Nullgas vernachlässigbar sein. Bei einem Meßbereich von 1000 ppm CO 2 z.B. ist Luft
mit ca. 400 ppm CO 2 ungeeignet. N 2 oder durch Natronasbest gesaugte Luft ist dann zu verwenden. Bei einer S0 2 /N0-Messung muß zur Einhaltung der Meßtoleranz für den Wasserdampfeinfluß das Gas für den Nullpunktabgleich (angefeuchtete Luft) in gleicher Weise wie das Meßgas durch einen Meßgaskühler geleitet werden (siehe auch unter Einflußgrößen).
Programmsteuerung und Meßwertverarbeitung
mit Mikroprozessor
Durchflußeinstellbereich
ca. 2 bis 3 1/min durch eingebaute Membranpumpe Fehlermeldung wenn Durchfluß < 1 l/min.
Einstellbare Grenzwerte
2 pro Meßkanal
16 Einstellwerte zwischen 20 % und 95 % der Meßspanne in einer Stufung von 5 %
Rauschen des Ausgangssignal
< bis « 1 % vom Endwert
Anzeigezeitkonstante
bei 2 l/min
ca. 4 bis 10 s je nach Geräteausführung.
Zulässige Umgebungstemperatur
0 bis 45 °C
Schutzart
IP 31 nach DIN 40050
Hilfsenergie
220 V, + 10 %, - 15 %, 50 Hz
etwa 70 VA beim ULTRAMAT 22 P
und 60 VA beim ULTRAMAT 21 P
Stahlblechgehäuse mit 2 seitlichen Tragegriffen(B x H x T)
436 mm x 166 mm x 260 mm
(+ 45 mm Kondensatbehälter)
Gewicht
etwa 9 kg