Siemens BEP 2000 Advance
Objektnummer | B00021883 |
---|---|
Seriennummer | 021883 |
Nome oggetto | Siemens BEP 2000 Advance |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
model: BEP 2000 Advance
annotation: Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Instrument
Number of plates
Up to 4 plates at once
Number of samples Max
100 tubes, up to max. 16 mm, length up to 200 mm
Number of reagents
Up to 4 reagent bottles in different sizes to be placed in special racks for Siemens reagents
Predilution positions
Positions for up to 4 predilution plates
Number of tips
Up to 5 tip racks for 300 µ l or 1100 µ l disposable tips
Loading
Continuous loading of plates, samples, reagents and tips
Photometer
Spectral range
400 - 700 nm
Dynamic range
-0.100 to 3.000 O.D.
Accuracy
+/- 0.005 or 2.5%
Linearity
0 - 2.000 O.D. +/- 1%
Detection
Photo diode
< 15 seconds
Read modes
OD and Kinetic mode
Filters
Up to 8 positions
Pipetting System
Pipettor
Liquid pipettor for disposable tips
Liquid level detection
Standard setting
Min Max volumes
10 µ l to 300 µ l or 1,000 µ l with large tips
Accuracy
< 3% at 10 µ l
< 0.5% at 100 µ l
Precision
< 3% CV at 10 µ l
< 2.5% CV at 100 µ l
Features
Tip detection, mixing, multidispensing mode
Incubation
Capacity
4 independent chambers
Temperature range
Minimum temperature = RT + 5°C
Maximum temperature = 50°C
Accuracy
+/- 1°C mean of plate
Uniformity
+/- 0.7°C across plate
Washing
Capacity
Max. 3 positions wash buffer + 1 distilled water
Wash head
1 x 8 with verify option
Dispense volume
200 - 2,500 µ l/well
Precision
+/- 5% CV at 300 µ l
Residual volume
< 2.5 µ l in U-shaped bottom
< 4 µ l in flat bottom
Fluid alarms
Low reagent, waste full
Features speeds
Sweeps, soak, purge, top & bottom wash, variable pump
Bar Code
Bar code identification of samples, reagents and test plates possible
PC requirements
PC IBM compatible Pentium PC
RAM
> 64 MB
Ports
2 serial ports
1 parallel port
Hard disk
Hard disk with min. 150 MB space
Accessories
Color monitor
Keyboard and mouse
Printer
Software features
Operating system
Microsoft Windows® 95 or Microsoft Windows® 2000
Interfaces
ASTM interface
Flexible ASCII import of worklist sample IDs
Time Scheduling Schedules
4 plates with user options
Multiple assays per plate
Up to 12 assays per plate
Export options
Flexible ASCII export and report
Qualitative
User definable result classes
Quantitative
Linear to quadratic regression, sigmoidal, and many more
Language support
Multiple languages possible
QA analysis
Mean, SD, CV, Standard Error and Levey-Jennings
Power Supply
Universal a.c. input
100 - 260 VAC, 47 - 63 Hz
Typically max. 500 VA
Main fuses
4 A T
Dimensions
W x D X H
114 cm x 156 cm x 100 cm
(Depth with waste bag and completely opened drawer)
Weight
130 kg
Noise
67 dB (distance 1 m)
Environmental conditions
This standard applies to equipment designed to be safe at least under the following conditions:
Ø Indoor use
Ø Altitude up to 2,000 m
Ø Temperature 5 °C to 40 °C
Ø Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
Ø Main supply voltage fluctuations up to +/- 10% of the nominal voltage
Ø Applicable rated pollution degree
Operating conditions
15 °C to 25 °C