Vai alla fine della galleria di immagini

Vai all'inizio della galleria di immagini

Soldé

SHP Steriltechnik LAV 25-B

Seriennummer: 013596

Preis auf Anfrage

Excl. 19% VAT , excl. Shipping Cost

siehe Storeview

Descrizione:

SHP Steriltechnik Steam sterilizer Laboklav LAV 25-B. Usable volume 25 L. Temp 98°-135°C. Automatic control unit up to 20 programs. NEW. Manufacturer guarantee

Details

siehe Storeview

Maggiori Informazioni

Maggiori Informazioni
Objektnummer	B00013596
Seriennummer	013596
Nome oggetto	SHP Steriltechnik LAV 25-B
Stato	Archived Product

Altri Prodotti

Gruppo prodotti: Autoclavi

Non è stato trovato alcun prodotto corrispondente alla selezione.

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Technical Specifications

Firma: SHP Steriltechnik

Modell: LAV 25-B

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

Das kompakte Tischgerät mit dem großen Fassungsvermögen und den Leistungen eines Großgerätes. Das neue Konzept des LABOKLAV 25 besticht durch überzeugende technische Lösungen und ein völlig neues Design. Das Gerät mit Durchblick", Kammerdeckel aus temperaturbeständigem Sicherheitsglas und Frontabdeckung aus Sicherheitsglas, LED Kammerbeleuchtung und farbigen LED Betriebszustandsleuchten.

Äußerst kompakt und platzsparend konzipiert bietet es alle Möglichkeiten eines großen Laborautoklaven:

- Sterilisation von Flüssigkeiten in offenen und leicht verschlossenen Gefäßen

- Instrumentensterilisation, auch mit Vorvakuum und Trocknungsvakuum

- Vernichtungssterilisation bei 134°C

Technische Daten:

Kammervolumen/Kammergröße 25 I nutzbar, Ø 265 x 465 mm,

Kammerbeleuchtung (LED weiß) zuschaltbar,

Beladung z.B. 5 x 1 I Laborflasche, bis zu 5 kg Instrumente

Abmessungen (BxHxT) 440 x 540 x 660 mm

Platzbedarf auf der Arbeitsplatte 440 x 550 mm + 110 mm Überhang Tür

Gewicht ca. 65 kg

max. zulässiger Druck (PS) 2.8 bar

max. zulässige Temperatur (TS) 138° C

Kammerwerkstoff Edelstahl: Kammerdeckel aus temperaturbeständigem Sicherheitsglas

Verkleidung pulverbeschichtet, Rot

Frontabdeckung aus Sicherheitsglas mit Sichtfenster

Betriebszustandsleuchten (LED) in Blau, Rot, Grün

Dampferzeugung integrierter Dampferzeuger mit Trockenheizschlangen

Heizleistung Dampferzeuger 2 kW

elektr. Anschluss 230V ~ 50 Hz, 16 A, Lichtstrom

Deckelverschluss motorisch betriebener Schnellverschluss mit Normkonformen Zwangsspalt zur Dampfentlastung beim

Öffnen

Sterilisiertemperatur 98-135° C, einstellbar

Speisewasserversorgung integrierter Vorratstank manuell befüllbar

Abdampfkondensation serienmäßig, Ablauf in integrierten Kondensatbehälter, Ablass über Schlauch mit Schnellkupplung

Steuerung Mikroprozessor mit LCD Display,

Code-gesicherter Zugriff auf Programmparameter, serielle Schnittstelle RS 485,

Archivierung von mindestens 100 Zyklusdaten in der Steuerung, nachträglicher Ausdruck oder

Ansicht möglich

Anzahl der Programme 20 Programme, Belegung in Abhängigkeit der Ausbaustufe, alle Programme individualisierbar,

Spezialprogramme auf Anfrage

Timerfunktion serienmäßig

Schnellrückkühlung, optional Luftkühlung mittels an die Kammer montierter Lüfter

Zubehör integrierter Nadeldrucker, Software ÂDOKUMENTATOR", Einlagengestell mit 4 Tabletts