Shimadzu UV 1601
| Objektnummer | B00023438 |
|---|---|
| Seriennummer | 023438 |
| Nome oggetto | Shimadzu UV 1601 |
| Stato | Archived Product |
Gruppo prodotti: Fotometri / Spettrofotometri
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Hersteller: Shimadzu
Modell: UV-1601
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Hardware-Spezifikationen
|
Messwellenlängenbereich |
190 ~ 1100nm
|
|
Spektrale Bandbreite (Auflösung) |
2 nm
|
|
Wellenlängenanzeige |
0,1 nm-Einheiten
|
|
Wellenlängeneinstellung |
0,1 nm-Einheiten (1 nm-Einheiten in Scan)
|
|
Wellenlängengenauigkeit |
± 0,5 nm Bord automatische Wellenlängenkalibrierung Mechanismus
|
|
Wavelength Wiederholbarkeit |
± 0,1 nm
|
|
Wellenlängen-Scan-Geschwindigkeiten |
GOTO WL-Befehl: ca. 6000nm / min Sehr schnell: ca. 3200nm / min Schnell: ca. 2200nm / min Medium: ca. 370 nm / min Langsam: ca. 260 nm / min Sehr langsam: ca. 160 nm / min
|
|
Abtastintervall |
1,0 nm (2,0 mm): 910nm> = Lambda-Bereich> = 500 nm 0,5 nm (1,0 mm): 500 nm> = Lambda-Bereich> = 200 nm 0,2 nm (0,5 mm): 200 nm> = Lambda-Bereich> = 100 nm 0,1 nm (0,2 mm): 100 nm> = Lambda-Bereich Das Abtastintervall in () gibt die ein zu "Very Fast" Wellenlängenscangeschwindigkeit. (Wo in ist "Lambda-Bereich" die Differenz zwischen dem Messstartwellenlänge und dem Messende Wellenlänge.)
|
|
Lichtquelle Schalt |
Automatische Umschaltung mit Wellenlängenbereich. Kann überall im Bereich von 295.0nm zu 364.0nm eingestellt werden (340.8nm wird empfohlen)
|
|
Streulicht |
Weniger als 0,05%
|
|
Belichtungsmessung |
Doppelstrahloptik
|
|
Photometriebereich |
Absorption: -0,5 ~ 3,999 Abs (bei ââunkorrigierten baselie Kurve innerhalb 0.5Abs) Durchlässigkeit: 0 ~ 300%
|
|
Registrierbereich |
Absorption: -3,99 ~ 3.99Abs Durchlässigkeit: -399 ~ 399%
|
|
Photometrische Genauigkeit |
± 0.004Abs (at 1.0Abs) ± 0.002Abs (at 0.5Abs)
|
|
Photometrische Reproduzierbarkeit |
± 0.002Abs (at 1.0Abs) ± 0.001Abs (at 0.5Abs)
|
|
Auto-Null-Funktion |
[AUTO ZERO] -Taste ermöglicht One-Touch-Einstellung
|
|
Basislinienstabilität |
± 0.001Abs / h
|
|
Baseline Ebenheit |
± 0.002Abs
|
|
Geräuschpegel |
0.002Abs
|
|
Basislinienkorrektur |
Automatische Korrektur mit Computerspeicher 2-Level-Baseline-Korrektur (Hochpräzisionsinstrument Basislinienkorrektur-Funktion)
|
|
Lichtquelle |
50W Halogenlampe (mit langer Lebensdauer 2000 Stunden), Deuterium-Lampe (Buchsentyp), Bord automatische Lichtquelle Positioniermechanismus
|
|
Monochromator |
Verwendet aberrationskorrigierende konkaven loderte holographische Gitter
|
|
Detektor |
Silizium-Photodiode
|
|
LCD |
B acklit (320x240 dot), Kontrast einstellbar
|
|
Probenraum |
Innenmaße 110x230x105 (mm) (BxTxH) (Teiltiefe 155mm) Die Entfernung zwischen Balken 100mm Abnehmbare Typ-2-Verschraubung Strahlabmessungen 1x10mm (BxH) (in der Mitte des Probenraum)
|
|
Energieversorgung |
100, 120, 220, 240 50 / 60Hz 160VA
|
|
Abmessungen |
550x470x380 (200 bei Abschluss LCD-Einheit) (mm) (BxTxH)
|
|
Last |
18kg
|
|
Umgebungstemperatur |
Raumtemperatur 15 ~ 35 ° C
|
|
Luftfeuchtigkeit |
Luftfeuchtigkeit 45 ~ 80%
|
