siehe Storeview

Maggiori Informazioni
Objektnummer	B00012349
Seriennummer	012349
Nome oggetto	Shimadzu AA 6200
Stato	Archived Product

Altri Prodotti

Gruppo prodotti: Assorbimento Atomico (Fiamma e Grafite)

Non è stato trovato alcun prodotto corrispondente alla selezione.

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Technical Specifications

Firma: Shimadzu

Modell: AA 6200

Kommentar: Dokumente deut.

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

Spezifikationen AA 6200

Hardware

Optik Zweistrahloptik

Czemy-Turner Monochromator

Holographisches Gitter (1600 Linien/mm)

Wellenlängenbereich 190-900 nm

Automatische Wellenlängenauswahl

Spaltbreite 0.2nm-0.7nm Manuelle Einstellung

Lampenhalterung Paralleler Betrieb von zwei Lampen

Manueller Wechsel

Untergrundkorrektur D₂ -Lampenmethode

Lampenmodus EMISSION; keine Ugk., D₂ -Ugk.

Frequenz 100 Hz

Zerstäuber Enthält eine Kunststoffauskleidung und einen Keramikball

Pt/Ir-Kapillare

Kammer Polypropylen

Brenner Festgelegte horizontale und vertikale Position

(Einfacher Wechsel zwischen Luft-C₂ H₂ - und

N₂ 0-C₂ H₂ -Brennerkopf)

Titan, 10 cm Schlitz

( Hochtemperaturbrenner optional)

Gaskontrolle Manuelle Einstellung der Flußraten

Automatische Luft/ N₂ 0 Umschaltung

Sicherheit Gasdruckkontrolle um ein Zurückschlagen

Der Flamme zu verhindern

Automatische Flammenkontrolle

Sicherheitsanschluß zur Kontrolle der Brennerwahl

Automatisches Löschen der Flamme bei Stromausfall

Entzünden der Flamme Durch Drücken des Ignition-Knopfes

Software Software basiert auf MS-Windows^TM

Dimensionen und Gewicht L690*B425*H370 mm, 38 kg

Strom AC220V; 230V + 10 %, 50/60 Hz, 300 VA (CE-Zertifiziert)

Temperatur und

Luftfeuchtigkeit Temperatur: 10-35 °C

Luftfeuchtigkeit: 45-80 % (aber weniger als

70 % bei Temperaturen über 30 °C)

Software

Konzentrationsbestimmung Kalibrationsmethode

Standardadditionsmethode

Einfache Standardadditionsmethode

Meßmodus AUTOZERO, BLK, STD, UNK, MSA, SMSA, WATT, PAUSE, FILESAVE Bestimmen Sie den Meßmodus, in dem Sie die genannten Befehle geben

Datenverarbeitung Analyse mittels Linearer Regression

Methode der kleinsten Fehlerquadrate

Abs =f (Konz.)

Kalibrationskurve erster, zweiter und dritter Ordnung EIN/AUS Nulldurchgang

Auswahl durch Kurvenbezeichnung möglich Wiederholungsanalysen Maximal 10 Analysen pro Probe

Genauigkeitsverbesserung Benutzung des Durchschnittswertes

Streichen anormaler Daten durch die Begrenzung der CV oder SD Werte

Empfindlichkeitsverbesserg. Automatische Berechnung der Empfindlichkeitskorrektur

Berechnung der aktuellen

Konzentration Automatische Berechnung der aktuellen Konzentration mit Hilfe des Probenvolumens und verschiedener Faktoren unmittelbar nach der Datenaufzeichnung

Signalaufzeichnungsprozeß

Meßzeit Vorspülen: 99 Sekunden, Datensammlung 99 Sekunden

Meßprozedur Wird leicht mit Hilfe der Wizard Funktion festgelegt

Reaaktionszeit vier Reaktionszeiten wählbar

Datenanzeige/ MRT Meßprozeß, Analyseergebnisse, aktuelle Konzentration, Berechnungsfaktoren für die aktuelle Konzentration kombiniert mit der Darstellung der Daten werden angezeigt

Signalanzeige Signalprofilabbildungen: 4

Derzeitiges Signalprofil: 1

Überlagern eines Signalprofiles durch eine ausgewählte Reihe der MRT

Shimadzu AA 6200

Questions about this product

Call-Back

Leasing