Shimadzu 14 A
Objektnummer | B00016971 |
---|---|
Seriennummer | 016971 |
Nome oggetto | Shimadzu 14 A |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer : Shimadzu
model : 14A GCFI
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Installation Environment
Although the unit operates in the range of ambient temperatures of 5°C ~ 40°C and relative humidity of 5% ~ 90%, use it within the range of 10°C ~ 30°C ambient and 50 ~ 60% relative humidity for longer service life and the optimum specifications. (Operating temperature range: 5°C ~ 40°C, specified temperature range: 10°C ~ 30°C)
Installation place
The following installation area is required. Install the unit at place which is protected from vibration and direct sunlight. As high-temperature (400°C) air is exhausted from the rear of the unit, do not place combustible things around the unit.
Dimensions of installation place
External dimensions of the unit
H: Height 520mm
W: Width 400mm
D: Depth 475mm
E: Height of flow controller 70mm
A : Required space behind the unit 300mm or more
B: With option unit 76mm
C: For C-R4A
Chromatopac
420mm
Weight of GC-14A main body: Approx. 40kg
Power
115/220V AC (50Hz/60Hz) and 2.0 kVA max, capacity are necessary for the power source of the unit (with no satellite oven installed).
Column oven 1.3kVA
INJ block 150VA
DET block- 300VA
TCD block 200VA
Total consumed power is calculated by totalling the power consumed by INJ, DET, column oven, and AUX blocks.
Range of source voltage ± 10%
Specified range of source voltage ± 5%
Power cable
As the maximum capacity of power exceeds 15A, power cannot be supplied from a general outlet. Accordingly, supply power from a specially-wired terminal with large capacity. Exercise caution in wiring in accordance with the functions and color of the power cable, as described below.
Specifications
Column oven
Dimensions of column compartment: 230 (W) X 140 (D) X 360 (H) mm
Length of columns to be Stainless steel column 10m X 2
accommodated : Glass column 3m X 2
Capillary column 100m X 1
Range of temperature setting: Temperature; -80~+399 1°C step
Rate of temperature rise; 0~40°C/min 0.1°C step Constant temperature hold time; 0~655 min 0.1°C step Program stages 5 stages max.
Range of temperature control (with power voltage of 100V)
Range of linear temperature 30°C/min 150°C or less
increase : 20°C/min 250°C or less
10°C/min 330°C or less
5°C/min 399°C or less
Lower-limit temperature: When INJ and DET temperature is 300°C,
room temperature + 15°C
When INJ and DET temperature is 150°C,
room temperature + 10°C
Additional cryogenic equipment is required for controlling at lower temperatures than those above.
Cooling speed: Approx. 9 min to reduce from 399°C to 100°C with
room temperature of 25°C.
Approx. 14 min for reducing from 399°C to 50°C with room
temperature of 25°C
Detector oven
Range of temperature setting: Room temperature ~ 399°C (in 1°C steps)
Control accuracy: ±0.02°C (Average)
TCD oven
Range of temperature setting: Room temperature ~ 399°C (in 1°C steps)
Control accuracy: ±0.01°C
Sample injection port unit
Range of temperature setting: Room temperature ~ 399°C
Control accuracy: ±0.1°C (Average)
Sample injection port unit (Either one of the following units is provided)
Single injection port unit: For packed glass column, combination type of glass
insert and on-column injection, 1 flow line
Dual injection port unit: For packed glass column, combination of glass insert
and on-column injection, 2 flow lines
Injection port unit for Exclusive injection port for capillary analysis
for capillary columns:
Overheat protection circuit 3 circuits
- 450°C-fixed independent protection circuit.
- Protection circuit for which the upper- lirnit temperature can be set via key operation.
- Overheat protection circuit by CPU abnormality detection
Combination of Detectors
- Four detectors at maximum from among TCD, FID, ECD, FPD, and FTD can be simul-taneously installed to the detector oven of the GC main body. Two TCD detectors cannot be set simultaneously.
- Only two types of detector controllers (except FTD) can be installed simultaneously to the control section of the GC. Another unit should be applied for installing three or more detector controllers, or FTD.