Servitec Polymix 150 L
| Objektnummer | B00018399 |
|---|---|
| Seriennummer | 018399 |
| Nome oggetto | Servitec Polymix 150 L |
| Stato | Archived Product |
Gruppo prodotti: Impianti Industriali
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Servitec
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
|
Das Laborwalzwerk Polymix bieten wir als universelle Maschine zum Mischen von Kunststoffen und Gummi an. Die Maschinen sind aus den jahrzehntelang bewährten Modellen der Firma Schwabenthan weiterentwickelt worden und sind weltweit in der Entwicklung, Forschung, Qualitätssicherung und Produktionsüberwachung im Einsatz. Die Walzwerke sind in verschiedenen Ausführungen erhältlich und können durch Ausbaueinheiten an kundenspezifische Anforderungen angepaßt werden. |
|
Walzeneinheit Verfügbare Walzendurchmesser 110 mm, 150 mm und 200 mm Mischwalzen aus Chromstahl, oberflächengehärtet und geschliffen Walzenlagerung mit wartungsarmer Ölschmierung und funktioneller Abdichtung polierte Materialbegrenzer auf der vorderen Walze Antrieb Einzelantriebe der Walzen standardmäßig Spaltverstellung elektrische Spaltverstellung mit Sicherheitsschnellöffnung digitale Anzeige des aktuellen Spaltwertes Sicherheitskonzept mit Bügel und beidseitigen Knieschalter Sicherheitsschnellöffnung und Bremsmotoren entsprechend den gültigen Europa-Normen Heizung elektrische Patronenheizung optimale Temperaturverteilung durch Kupferkern digitale Temperaturregelung Viele Ausbaueinheiten für kundenspezifische Anforderungen: Hartverchromung der Mischwalzen Materialbegrenzer in zweiteiliger und klappbarer Ausführung zentrale Wasserkühlung verschieden Antriebssysteme (vordere Walze verstellbar, beide Walzen gemeinsam verstellbar oder beide Walzen einzeln verstellbar) Polycontrol Bildschirmsteuerung |
|
Technische Daten Anschlußwerte |
|
|
Spannung |
3 x 400 VAC |
|
Frequenz |
50 Hz |
|
Anschlußleistung |
25 kW |
|
Stromstärke |
3 x 35 A |
|
Elektrische Absicherung |
3 x 35 A |
|
Kennwerte |
|
|
Walzendurchmesser |
150 mm |
|
Walzenbreite |
450 mm |
|
Arbeitsbreite |
380 mm |
|
Walzenspalt (Arbeitsbereich) |
0,1 - 3,0 mm |
|
Antrieb |
S T* U* |
|
Drehzahl vordere Walze |
16 U/min 10-24 U/min 5-35 U/min |
|
Drehzahl hintere Walze |
20 U/min 20 U/min 5-35 U/min |
|
Drehzahlverhältnis |
1:1,2 1:2 bis 1:0,5 variabel |
|
Antriebsmotor |
Drehstrom |
|
Leistung |
2 x 3,5 kW |
|
Drehmoment |
bis 2 x 950 Nm |
|
Schmieranlage |
Zentralumlaufschmierung mit Zahnradpumpe |
|
Ölfüllmenge |
ca. 4 I |
|
Heizung |
|
|
Oberflächentemperatur |
bis 220 ° C |
|
Oberflächentemperaturtoleranz auf der Arbeitsbreite |
± 2 °C |
|
Heizungsart |
elektrisch |
|
Heizleistung pro Walze |
6 kW |
|
Heizleistung insgesamt |
12 kW |
|
Schaltverhalten |
PID |
|
Temperaturfühler |
Widerstandsthermometer Pt 100 |
|
Kühlung* |
|
|
Anschluß Zulauf |
1/2 |
|
Anschluß Ablauf |
1/2 |
|
Wasserdruck |
4 bar |
|
Kühlwasserbedarf |
20 1/min |
|
Abmessungen |
|
|
Maschinenlänge |
1400 mm |
|
Maschinenbreite |
800 mm |
|
Maschinenhöhe |
1300 mm |
|
Arbeitshöhe |
1200 mm |
|
Arbeitsflächenbedarf |
3 m x 3,5 m |
|
Maschinengewicht |
ca. 1000 kg |
