Schmidt Haensch IPR 3
Objektnummer | B00018951 |
---|---|
Seriennummer | 018951 |
Nome oggetto | Schmidt Haensch IPR 3 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer : Schmidt- Haensch
model : IPR 3
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
- Inline, real-time refractive index, Brix or concentration measurement to monitor and control the concentration of dissolved solids in solutions, or liquids in process
- Stainless steel measuring head featuring a sapphire or YAG prism, CIP capability (pipe pigs usable)
- Continious measurement and real-time process control with analog and digital outputs, limit comparators and internal diagnostics
- Programmable scales, Brix scale temperature corrected
IPRs measure the refractive index continuously and determine thereby the concentration of dissolved solids in solution and/or the mixing proportion of binary or quasi-binary liquid mixtures.
The measurement is independent of turbidity, colour and absorption and is free of Signal drifts, granting high precision and better process control. The Brix measurement is temperature-compensated for the process stream conditions, generating reliably both high resolution and high precision.
The new generation of IPR measuring heads have high communication skills. The process sensors can visualize the measuring results as a single solution by data logger. lt can be used as fully autonomous sensor or connected directly to a supervisory process control system or to the Universal Controller.
The new generation of IPR measuring heads gives also the possibility to construct an intelligent sensor station which consists for example of several refractometers , turbidity measuring devices and CO 2 sensors. The Universal Controller can also be used as a control desk for different other process sensors e.g. 0 2 , CO 2 , pH or conductivity.
This special kind of characteristic in the communication opens valuable economy possibilities for customers, because a separate display or special configuration is not needed for each sensor.
Refractometer applications
Process refractometers are used in many fields for measuring, process control and documentation.
Chemical industry
Inorganic acids and bases
Fats and oils
Organic products and dissolvents
Salt solutions
Pulp and paper
Paints and glues
Petrochemical industry
Paraffins , waxes
Petrol chemical products (ex-proof version available)
Resins
Semiconductor industry
Slurries, hydrogen peroxide, hydrofluoric acids
Vehicle- and engine construction
Antifreezer
Oils, lubricants
Food industry
Juice, fruit concentrate
Soft drinks
Vine, beer
Coffee, coffee extract
Milk products, yoghurt
Tomato pate, ketchup
Marmalades, jams, jellies, fruit processing
Candies, chocolate
Starch
Sugar industry
Raw juice, thin and thick juice
Massecuite , molasses
Liquid sugar, compressed water
Crystallisation pans
Textile industry
Polyvinyl alcohol
IPR Basic
Measuring ranges: B1: 1.3320 - 1.4200 RI / 0 - 50 Brix
B2: 1.3800 - 1.4800 RI / 30 - 75 Brix
B3: 1.4000 - 1.5000 RI / 45 - 85 Brix
B4: 1.4200 - 1.5300 RI / 55 - 95 Brix
Resolution: 0.0001 RI / 0.1 Brix
(0.00002 / 0.02 Brix upon request, depending on process)
Precision: ± 0.0002 RI / ± 0.2 Brix
Process temperature (max.): 135°C (with water cooling installed)
Process pressure (max.): 1 MPa (145 psi , 10 bar )
Process contact material: Sapphire or YAG, Stainless steel, optional: Teflon
Power supply: 24 V DC
Light source: 589 nm LED
Interfaces: 2 insulated 4 - 20 mA analog outputs
2 digital outputs / limit switches
2 serial outputs, alternatively RS232 or RS485
Mounting accessories: VariVent ( Tuchenhagen ) or customer specified
Others: CIP and pipe pig use possible, optional: cleaning device for prism, 00paperless data recorder, universal controller
IPR FR (
Technical data as like iPR Basic, deviate:
Measuring ranges: B1: 1.3320 - 1.5300 RI / 0 - 95 Brix
B2: 1.4200 - 1.6000 RI / 50 - 100 Brix
Resolution: 0.0001 RI / 0.1 Brix
Precision: ± 0.0002 RI / ± 0.2 Brix
Process temperature (max.): 150°C (with water cooling installed)
IPR HR (High Resolution)
Technical data as like IPR Basic, deviate:
Measuring ranges: 1.332000 - 1.372000 RI / 0 - 25 Brix
Resolution: 0.000005 RI / 0.003 Brix
Precision: ± 0.00007 RI / ± 0.05 Brix
IPR EX (Ex proof version)
Technical data as like iPR Basic, deviate:
Ex proof: Intrinsically safe, ATEX class ib II A T4
Control unit: Splash proof IP 65 (NEMA 4)
Power supply: 85 - 260 V / 50 - 60 Hz
iPR Compact
Measuring ranges: 1.3320 - 1.4209 RI / 0 - 50 Brix
Brix range with ATC: 0 - 50 Brix
Resolution: 0.0001 RI / 0.1 Brix
Precision: ± 0.0002 RI / ± 0.2 Brix
ATC-Range: 10 - 50° C
Process temperature (max.): 50°C
Process pressure (max.): 1 MPa (145 psi , 10 bar )
Power supply: 24 V DC
Light source: 589 nm LED
Data output: 4 - 20 mA ( Brix 0 - 50 with ATC)
RS 232 or RS 422
Dimension: 150 x ø 65 mm
Weight : 1000 g