Pharmacia P 500
Objektnummer | B00014070 |
---|---|
Seriennummer | 014070 |
Nome oggetto | Pharmacia P 500 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Firma: Pharmacia
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Introduction
The High Precision Pump P-500 is a laboratory pump for use in liquid chromatography and other applications where constant flow at pressures up to 4 MPa (40 bar, 580 psi) is required. Pump P-500 is very accurate and reproducible, especially at low flow rates over the whole pressure range. The excellent chemical resistance of the pump makes it possible to work with corrosive liquids, e.g. organic solvents, as well as aqueous solutions.
Pump P-500 is designed to facilitate routine chromatography work. The flow rate is easily and accurately set with a three digit thumb-wheel switch. The wide flow range makes the pump suitable both for analytical and preparative chromatography. A unique wash program provides fast and secure solvent change-over and a pressure limit control protects the column from damaging pressures.
Together with the Gradient Programmer GP-250, GP-250 Plus or the Liquid Chromatography Controller LCC-500, LCC-500 Plus or LCC-500 CI (Computer Interface), the Pump P-500 can be used to form accurate and reproducible gradients.
Pump P-500 is fully compatible with other equipment such as the single and dual path UV-monitoring systems UV-M II, UV-1, UV-2 and their associated recorders and with the Fraction Collectors FRAC-100, FRAC-200 and SuperFracTM
Pump P-500 is designed to work with a wide range of columns and gels supplied by Pharmacia LKB.
Specifications
Flow rate range 1-499 ml/h variable in steps of 1 ml/h.
Operating pressure 4.0 MPa (40 bar, 580 psi) up to
200 ml/h. 2.5 MPa (25 bar, 360 psi) in the range 200-499 ml/h.
Flow rate accuracy ±1.5% of setting or ±0.5 ml/h (which ever is greater) independent of back pressure.
Reproducibility Better than 0.5% set f low rate.
Flow rate precision Better than 1% over 8 hours at
160 ml/h with the same solvent and temperature.
Materials of wetted parts Fluoroplastics (Kel-F, Tefzel, Teflon), PEEK, Kalrez®, titanium and borosilicate glass.
Pressure read out 0-5.0 MPa (0-50 bar, 0-700 psi). Pressure recording 0.5 MPa (5 bar, 70 psi)/mV.
Pressure Limit Protective shutdown, adjustable in the range 0-5.0 MPa (0-50 bar, 0-700 psi).
Voltage 100-120 V ±10% or 200-240 V ±10%.
Frequency 50-60 Hz.
Power consumption 18 W, normal running.
Temperature range 4-40 °C.
Dimensions 410 x 217 x 165 mm.
Weight 9 kg.
Motor Stepper motor (110 pulses/0.1 ml).
Saf ety standard Electronics designed according to IEC and UL requirements.
Kalrez®, is registred trade mark of DuPont