Perkin Elmer Turbomatrix 40
Objektnummer | B00012757 |
---|---|
Seriennummer | 012757 |
Nome oggetto | Perkin Elmer Turbomatrix 40 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer: Perkin Elmer
model: TurboMatrix 40
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Specifications | |
Hardware Sample capacity TurboMatrix 16 – Sixteen vials with overlapping thermostatting of one vial. TurboMatrix 40 – Forty vials with intelligent overlapping thermostatting of up to twelve vials. TurboMatrix 110 – One hundred and ten vials with intelligent overlapping thermostatting of up to twelve vials. TurboMatrix 40 Trap – Forty vials with intelligent overlapping thermostatting of up to twelve vials plus built-in trap for lower detection limits. TurboMatrix 110 Trap – One hundred and ten vials with intelligent overlapping thermostatting of up to twelve vials plus built-in trap for lower detection limits. Sample vials Use PerkinElmer 22 mL sample vials (P/N B0104236) for a maximum liquid sample volume of 15 mL. With the low-volume vial adapters (P/N N6120110) the TurboMatrix 16 and TurboMatrix 40 systems can also use 9 mL sample vials (P/N N9302134) for a maximum sample volume of 2 mL. The 9 mL sample vials cannot be used on the TurboMatrix 110 system. Note: Use of non-PerkinElmer sample vials and patented cap enclosures is NOT recommended and system performance problems resulting from the use of non- PerkinElmer vials and caps will NOT be covered under the system warranty. Sample thermostatting Solid aluminum thermostatting oven. Thermostatting period and temperature precisely controlled for each sample. Software algorithm automatically optimizes sample thermostatting overlap. Sample temperature Temperature settable from 35 °C to 210 °C in 1 °C increments or can be run at ambient. Sample needling Stainless Steel (Platinum/Iridium needle optional). Temperature settable from 35 °C to 210 °C in 1 °C increments or can be run at ambient. Transfer line length Choice of 1008 mm or 1650 mm. Transfer line Temperature settable from 35 °C to 210 °C in 1 °C increments or can be runtemperature at ambient. Transfer line system Deactivated fused silica capillary transfer line or capillary column (0.32-µm i.d. or 0.25-µm i.d.) shielded inside a heated transfer tube between the headspace samplerand GC injector. Column compatibility Compatible with all capillary column diameters in split and splitless (direct coupled) mode. On-column sampling using 0.25-mm i.d. or 0.32-mm i.d. capillary columns and 1/8-inch o.d. packed columns. Sampling method Pneumatic, pressure-balanced sampling (no syringe or gas sample loop). Sample vials are pressurized with carrier gas. During the injection period, carrier gas flowing to the GC system is replaced by pressurized sample gas. Rapid transfer of analytes is ensured without re-equilibration in a gas sampling valve or syringe and subsequent loss of analytes. Injection amount is programmable by time or by volume without requiring any hardware change. Analyte compatibility Polar and non-polar organic compounds can be analyzed without any change of internal tubing. Low risk of sample composition change during analyte transfer. Analysis of chemically activecompounds such as free volatile organic acids, sulfur compounds, amines and other nitrogen containing organic compounds can be performed using the optional Platinum/Iridium needle. Pneumatic control Choice of: — Manual pneumatics using built-in pressure regulator (0-60 psig). — Electronically controlled Programmable Pneumatic Control (PPC) module (0-60 psig). Modes of operation Constant mode Routine analysis mode with constant, equal thermostatting time for each sample. Includes Express Step Function to automatically optimize oven movement for maximized sample throughput. MHE mode Multiple headspace extractions from each vial. Up to nine extraction steps with intermediate vent performed automatically. For use in method development and validation or for routine analysis of special samples. Progressive mode Method development tool used in determining required equilibration time and in performing kinetic studies. Thermostatting time is automatically increased to determine optimal thermostatting time. Control Stand-alone Each headspace sampler is a self-contained stand-alone unit. All instrument functions are easily operation controlled from the touch screen of the built-in graphical user interface. Set and actual values may be displayed at any time. Configurable user interface for simplest possible interaction. — Simple one-touch operation — Single method operation — Sequence-based multimethod operation with up to eight methods — Password protection — Ten operating methods can be stored in the instrument — Parameters remain stored with last used method directly available after power-up Operating languages English, French, German, Italian, Japanese, Spanish and Russian. Software control An optional control software package is available to control the headspace samplers from a Microsoft Windows® environment. The headspace control software offers graphical representation of instruments and parameters with intuitive interaction. Sequence building follows the easy drag-and-drop principle. A runlog tracks and saves information on samples and performed analyses for GLP compliance. Context sensitive on-line help is available for all functions. Gas chromatograph/data system interfacing Output signal lines for READY and RUN to start gas chromatograph and data handling devices. Input lines for START, STOP and READY to control the headspace unit externally. Six built in relays (4 with contact closures, 2 with 24-volt outputs). Economy mode Programmable power-saving and gas-saving feature with automatic wake-up function. Priority vial One or two vial positions can be assigned to priority vials. Urgent vials can be placed in these positions and will be inserted into the analysis sequence for quickest possible analysis. Available for the TurboMatrix 40 and TurboMatrix 110 headspace samplers, non-trap and trap models. Maintenance alarms Settable injection counter that alerts user when it is necessary to perform routine maintenance. System integrity checks Automatic system leak checking Static leak check: Checks the whole system for leaks prior to analysis Dynamic leak check: Checks each vial for leaks as it is sampled Vial temperature calibration User calibration supported. Optional accessories Shaker Patented frequency scanning shaker for quicker sample equilibration during thermostatting. All vials are agitated simultaneously to allow quicker equilibration. Automatic frequency scanning program optimizes the agitation process. Available for the TurboMatrix 40 and TurboMatrix 110 headspace samplers, non-trap and trap models. Cryofocusing/water trap On-column cryofocusing accessory for preconcentration of analytes and improved detection limits. Water trap included to allow large-volume sampling from aqueous samples without ice blockage. Available for the TurboMatrix 40 and TurboMatrix 110 headspace samplers, non-trap models only. BCD output Output of sample number to external device. Standard on TurboMatrix 110 headspace sampler, non-trap and trap models. Injector adapter kits Injector adapter kits are available for most contemporary GCs. Side-mount kit available for PerkinElmer AutoSystem/AutoSystem XL Gas Chromatograph. Removable sample tray Extra sample trays for vials to be loaded into while instrument is running. Available for the TurboMatrix 40 and TurboMatrix 110 headspace samplers, non-trap and trap models. AutoSystem injector interface Special hourglass injector insert to connect the fused silica transfer line from the headspace sampler to the capillary column provides the performance advantages of a direct connection while still maintaining the convenience of connecting to a split injector. Physical details Ambient operating conditions Temperature range: 15 °C to 32 °C Humidity: 75% maximum RH without condensation Power requirements: 100/120/240 V; 50/60 Hz; 900 VA Dimensions in cm TurboMatrix 16: W*D*H 43*58*61 TurboMatrix 40 (non-trap and trap): W*D*H 43*61*61 TurboMatrix 110 (non-trap and trap): W*D*H 43*61*61 Weight TurboMatrix 16: 32 kg TurboMatrix 40: 33 kg TurboMatrix 110: 35 kg |