PCT 90
Objektnummer | B00017788 |
---|---|
Seriennummer | 017788 |
Nome oggetto | PCT 90 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer : PCT
model : 90
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
The Model 90 is a Microprocessor based controller/timer. It monitors temperature utilizing a Type J thermocouple sensor and controls bath temperature with a standard three mode (PID) control scheine, with anti-reset windup. Numerous status and alarm functions are incorporated to monitor various system parameters. Additionally, a down-count/up-count programmable timer, with cumulative over timer and pre-warn is integrated into the system. A pilot duty photoisolated triac output is used to drive a remote heater power relay. An optional power pack may be furnished that will provide the load carrying solid state switching an board. Additionally, an optional Auxiliary Relay may be provided. This may be utilized for either Timer or DI output.
An independent high Limit circuit is provided. It is powered by an isolation transformer that draws power from the primary side of the master relay. The sensor is a Type J thermocouple. This circuit shuts off the internal master relay should an over temperature condition occur.
Twelve discrete LEDs are utilized to indicate system and display status as well as annunciate various alarms. A 12 key membrane switch is incorporated in the facepanel to allow for user setup and adjustment of the system, plus full timer control.
Two numeric displays are utilized to allow the viewing of both the process temperature and the timer simultaneously. Additionally, each of the displays has multiple diagnostic and setup functions that may be activated by the keyboard or by the Microprocessor during various setup and alarm conditions.
The microprocessor section consists of two circuit boards, one for display and the other for control. The control board contains two transformers and provides the isolated DC supplies (+5 and +12 volts) necessary to run the system. In addition, it contains an instrumentation amplifier, A/D converter, EEPROM memory and the microprocessor. The display board contains all of the seven segment and LED displays as well as the audio transducer.
Technical Data
RANGE 0.0 - 199.9 Degrees C.
(Temperature)
RESOLUTION 0.1 Degrees C.
(Temperature)
NOISE REJECTION NMR - 60 db @ 60 HZ
CMR -120 db @ 60 HZ
RANGE (Time) 0:00 - 99:59 Min :Sec
RESOLUTION (Time) 1 Sec.
MEASURING TIME 4 Conversions/Sec
DISPLAY Eight, 0.56 Inch High, Seven Segment,
LED Uniplanar numerals. Twelve Discrete
LEDs (Red, Green, Amber).
ANNUNCIATOR Audio Tone, - 2500 HZ
SETUP MEMORY EEPROM, All Parameters
MEMORY RETENTION 10 Years w/o Power
SENSOR Standard - Type J Thermocouple,
Cold Junction Compensation,
Up Scale Break Protection.
CONTROL PID with Anti-Reset Windup.
ADJUSTMENT Cycle Rate: 1 - 19 Sec.
Proportional Band: .1 - 19.9 Deg. C
Reset (Integral):
.1 - 19.9 Sec
.
Rate (Derivative): .1 - 19.9 Sec.
Calibration Offset: ± 9.9 Deg. C
OPERATING RANGE 0 to 50 Degrees C
STORAGE RANGE -40 to 60 Degrees C
CONSTRUCTION Enclosure - Kydex.
Face - Lexan, Back Printed
SIZE 7 x 6 x 5.25 inches (HxWxD)
178 x 152 x 133mm
WEIGHT ≤ 4 Lbs. (1.8 kg)
CONNECTION Rear, Screw-Type, 3/8 Inch Centers;
T/C - Miniature, Type J, Jack.
OUTPUT SSR, Optically isolated, zero cros s,
20 Amp, 208 VAC.
POWER 11 VA, 208 VAC ±10%, 50/60 HZ