Vai alla fine della galleria di immagini

Vai all'inizio della galleria di immagini

Soldé

Parker Nitro Flow Lab

Seriennummer: 018984

Preis auf Anfrage

Excl. 19% VAT , excl. Shipping Cost

siehe Storeview

Descrizione:

Parker Nitrogen generator Nitro Flow Lab. Max 8 bar N 2. Nitrogen is generated from indoor air. Hours: 280 h. Manufacturer s warranty to September 2011 or 8000 operating hours. Device was in the pharmaceutical industry in the QC in use. YoC 2009

Details

siehe Storeview

Maggiori Informazioni

Maggiori Informazioni
Objektnummer	B00018984
Seriennummer	018984
Nome oggetto	Parker Nitro Flow Lab
Stato	Archived Product

Altri Prodotti

Gruppo prodotti: Analizzatori-Misuratori di Gas

Non è stato trovato alcun prodotto corrispondente alla selezione.

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Technical Specifications

Firma: Parker

Modell: Nitro Flow Lab

Kommentar: Dokumente deut.

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

NitroFlow Lab

für LC/MS

Stickstoff nach Bedarf, bis zu 32 l/min

Der Parker Balston NitroFlow Lab ist ein Stickstofferzeuger mit integriertem Kompressor, der bis zu 32 l/min an reinem Stickstoff in LC/MS-Qualität bei Drücken von bis zu 8 bar erzeugt. Der Stickstoff wird durch Verdichtung von Luft und anschließende Membrantrennung erzeugt. Hoch- und Niederdruck-Kompressoren werden sorgfältig so an die Hohlfasermembranen angepasst, dass ein leiser, zuverlässiger Betrieb garantiert ist. Ölfreie Druckluft wird durch die einzigartigen proprietären Hohlfasermembranen geleitet, die die Luft in einen konzentrierten Stickstoffstrom aufteilen.

Typische Anwendungen sind zum Beispiel LC/ MS, LC/MS/MS, Nebuliergase für APCi und Esi , ELSD, TurboVaps und die Verdampfung von chemischen Lösungsmitteln. Der NitroFlow Lab wurde von allen großen LC/MS-Herstellern ausgiebig getestet.

Produktmerkmale

Komplettes Plug-and-Play-System , das von allen großen LC/MS-Herstellern empfohlen wird
Gleichmäßige Versorgung aller LC/MS-Anwendungen mit Stickstoff
Phthalatfrei , keine organischen Dämpfe
Keine gefährlichen Stickstoff-Gasflaschen im Labor erforderlich
8000 Stunden Kompressorgarantie
Leiser Betrieb

Die einzigartige Kombination der Zweistufenkompressor-Technologie sorgt dafür, dass das NitroFlow ® Lab gegenüber allen weiteren LC/MS-Stickstofferzeugern diverse einmalige Vorteile bietet.

Stickstoff wird bei Niedrigdruck erzeugt und anschließend auf 8 bar komprimiert. Damit wird der Wartungsaufwand des Systems auf ein Minimum reduziert, da kein Austausch von Druckluftfiltern erforderlich ist und sich kein Kondensat bildet

Die Parker Balston Garantie für den Kompressor gilt für 8000 Betriebsstunden, die längste, die derzeit auf dem Markt zu finden ist.

Die wichtigsten technischen Daten

Modell NitroFlow Lab

Reinheit 99.5%

Phthalatfrei Ja

Kohlenwasserstofffrei Ja

Durchfluss bis zu 32 lpm

Verdichtungsdruck 8 bar

Ausgangsanschluss 1/4" G (optional 6 und 8 mm Steckkupplungen im

Lieferumfang enthalten)

Umgebungstemperatur 10 - 35°C

Spannungsversorgung 230VAC- 50Hz

Stromverbrauch 1400 Watt

Geräuschpegel <58 dB (A)

Abmessungen (H x B x T) 700 x 310 x 900 mm

Gewicht (Versandgewicht) 93 Kg (98)