Packard Multiprobe 204
Objektnummer | B00011009 |
---|---|
Seriennummer | 011009 |
Nome oggetto | Packard Multiprobe 204 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer : Packard
model : Multiprobe 204
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
1 Level Detector Cable
2. Sampling Tips
3. Tip Holders
4. Connector Block
5. Robotic (XYZ )Arm
6. Safety Shield
7. ZRacks
8. Syringe Pump Outlet Tubing
9. Tubing Guide
10. Front Shield
11. Top Cover
12. Safety Shield Retainer Screws End
13. End Cap
14. Syringe Valves
15. Peristaltic Pump Outlet Tubing
16. Syringe Pump Inlet Tubing
17. System Liquid Container
18. Peristaltic Pump Tubing
19. Peristaltic Pump
20. Peristaltic Pump Manifold
21. Syringe Pumps
22. Grid Deck
23. Work Surface
24. On/ Off Switch
The MuItiPROBE Automated Liquid Handling System is a fully automated sample processor. Automating the process of liquid handling greatly increases the speed and accuracy with which sample preparation can be carried out. The instrument emphasizes precision, accuracy, minimal carryover and ease of use.
The instrument's modular design minimizes down time due to servicing and keeps daily maintenance to an absolute minimum. High precision syringe pumps are used for pipetting of sample, reagent and diluent. A peristaltic pump is utilized for high speed tip washing.
Eliminating CarryOver
The need for minimal or zero carryover is of paramount importance. To that end, the sampling tips of the instrument each have a liquid level detector that causes the tip to stop as soon as liquid is detected. A programmed submerge depth ensures that sample liquid. will be aspirated without unnecessary external contamination of the sampling tips. As liquid is aspirated, the sampling tips follow the liquid surface down maintaining a constant submerge depth.
Flexibility
Throughput of the instrument is maximized by the simultaneous operation of up to four sampling tips. The instrument utilizes a feature called Varispan " Varispan is the ability of the instrument to automatically vary the Y spacing (front to back) between the four sampling tips. This means that you can use several combinations of tubes, bottles, and plates together, without sacrificing throughput. Th minimum spacing between the tips is 9 mm; the maximum spacing is 31 mm.
The 101 does not utilize Varispan since it offers a single tip only.
Utilizing independent liquid level detectors, the instrument can aspirate four samples simultaneously, with or without reagent and diluent; and dispense to other tubes, microplate wells, or other destination vessels.
This kind of flexibility renders the instrument the ideal solution for most laboratory methodologies in the clinical, life science, or pharmaceutical environments.
Instrument Models
The MultiPROBE Automated Liquid Handling System offers the 100 series and the 204. The 100 series offers the 101 single tip system , the 104 four tip system and the 104DT disposable tip system. The 204 offers a four tip system only.
Both the 100 series and the 204 share the same liquid handling components and also offer a grid deck system. The grid deck provides for the flexible arrangement of racks. When you use the grid deck, the number and variety of rock positions is expanded. Rocks can be rotated 90° and 180° for example.
There is one large grid plate on the work surface of the 100 series. There are three grid plates on the work surface of the 204. Collectively these plates comprise the grid deck.
The physical dimensions of the two systems differ: the 204 offers about twice the deck capacity as the 100 series. The increased deck capacity allows the system to process more vessels at one time.
Example deck capacities of the 100 series and the 204 are shown below. Capacities may vary based on vessel size and deck orientation.
MuItIPROBE 204 Deck Capacity
Tube to tube Up to 984 test tubes
Tube to microplate Up to 500 primary tubes and 12 microplates
Microplate to microplate Up to 24 microplate
Teflon®Coated Tips
Both systems are equipped with Tefloncoated fixed tips. The tips can be washed between samples both internally and externally at a specially designed wash station. This wash process, combined with. the Teflon coated tips, helps to keep carryover to a minimum.
The wash station is Iocated an the surface of the Instrument. The volume and rigor of the wash is userprogrammable, and is automatically controlled by the instrument.
Disposable Tips
The disposable tip system can be equipped with conductive disposable tips or non conductive disposable tips. Conductive tips are capable of detecting the surface of Tonic and non ionic solutions. Non conductive tips are not capable of liquid detection.
Both varieties of tips come in 200u1 ,, 20u1, and IniL sizes.
Both conductive and nonconductive disposable tips are available from Packard. Contact your sales engineer for Packard Instrument Company order information.
Instrument Components
The MultiPROBE Automated Liquid Handling System is composed of software and hardWare components. The liquid handling portion of the system is the most visible and critical portion of the hardware.
The liquid handling components of the instrument are controlled by the software. The software resides an the hard disk of the computer. The hardware is based an a modular design concept in which each of the major instrument functions are performed by an independent component of the instrument.
The principle liquid handling components of the instrument are the:
§ Syringe Pump Modules.
§ Peristaltic Pump.
§ XYZ Movement Mechanism (Arm).
§ Liquid Detector.
§ Wash/Waste Station.
Syringe Pump and Peristaltic Pump
The syringe pump module and the peristaltic pump are shown in Figure 2-1. The syringe pump module consists of a syringe Barrel with a 4port valve. The'valve is also connected to the peristaltic pump, the sampling tip, and the system liquid container. The parts that come into contact with the liquid are made of rubberized plastic tubing, santoprene tubing, and glass.
The syringe plunger is driven by a stepper motor. Both the valve and the stepper motor are controlled by the computer. Each syringe pump module performs the aspiration and dispense functions of one sampling tip.
Specifications
Pumps
Up to four high precision Pumps for precision liquid handling. Standard syringe sizes are 500 uL; optional syringe sizes are also available. A peristaltic pump for tip wash.
Microcomputer
n IBM compatible computer (80386 or higher) with 2MB RAM.
n 40MB hard disk or higher.
n 3.5" 1.44MB floppy disk drive.
n VGA color graphic adapter.
n DOS 5.0.
n Mouse and mause driver (Microsoft compatible).
n Enhanced function keyboard.
n VGA color monitor.
n At least one RS-232 input/output, one mouse port, and one printer port. Other configurations may require additional ports.
Precision and CarryOver
§ CV < 1% at 100% syringe volume.
Carryover of less than 1:1,000,000 with adequate tip wash.
Physical Dimensions
MuItiPROBE 204 Overall
Height 27 inches 686 mm
Width 51 inches 1295 mm
Depth 32 inches 813 mm
MuItiPROBE 204 Total Workspace
Height 4.5 inches 115 mm
Width 46 inches 1150 mm
Depth 11.25 inches 286 mm
Approximate Weights
Net Weight 200 lbs 91 kg
Shipping Weight 265 lbs 120 kg
Electrical Requirements
100, 220, 240 VAC +-1%; 50/60 Hz, 350 VA.
Environmental Requirements
Operating Ambient Temperature 59-95° (15-35°C)
Operating Relative Humidity 60% to 95% at 85°F (30°C)
Options
n Dot Matrix Printer: 80column, high Speed, bidirectional printer with IBM compatible parallel interface.
n 1 mL (1000uL) Syringe Assembly: Includes up to four lmL syringe barrels, plungers and piston seals for larger volume applications.
n 2.5 rnL (2500uL) Syringe Assembly: Includes four 2.5 mL syringe barrels, plungers, and piston seals for larger volume applications.
n Customer Maintenance Kit: Parts required for proper preventive maintenance of the system. Includes two syringe barrels, two valves, four piston seals, four sampling probes, and liquid tubing.
n Disposable Tips: Disposable tips help to eliminate carryover. Disposable tips are available in both liquid sensing (conductive) types and non sensing (standard) styles.
n Barcode System: Available for the MultiPROBE 204 only. Helps to ensure positive sample identification. System includes 16 cassette barcode deck with barcode scanner. 12 well cassettes can accommodate a total of 192 tubes (16mm or 17mm). 16 well cassettes can accommodate a total of 256 tubes (10mm, 12mm, or 13mm).