Millipore Microfil
Objektnummer | B00014470 |
---|---|
Seriennummer | 014470 |
Nome oggetto | Millipore Microfil |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Millipore
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
A Simple Method for Routine Testing of Microbiological Samples
The new Microfil System provides a low-cost, simple and re iable way to routinely test f uids for microbiological contamination, e iminating the need for equipment cleaning and steri isation after each test, thus reducing test times.
The new patented vacuum support is easy to use and facilitates removal of the membrane after the sample has been processed. There is no need to store spare parts, since funnels are disposable. A patented sealing system reduces the risk of leaks and secondary contamination, often experienced with conventional systems. There is no membrane wrinkling or distortion. Manipulating the membrane is also easier and the risk of introducing air between membrane and agar surface prior to incubation is reduced, resulting in better recovery of organisms.
Disposable "push-fit" funnel
The Microfil disposable "push-fit" 100 ml polypropy ene Tunnel eliminates the need for washing and sterilising afte" each test and makes equipment Handling easy. Un ike conventional filter holders which can exhibit "deal" areas, the Microfil ffunnel design avoids sample entrapment, resuting in better recovery of organisms an the membrane. A unique lip seals the funnel against the membrane while the funnel itself is held firm y an the fi tration support without any additional clamping.
Microfil funnels are pre-steri ized and are ready-to-use. A convenient funnel dispenser is available.
Patented vacuum support
To facilitate membrane filter Handling after the fi tration process, Millipore has developed a new 47 mm vacuum support, which in one step Breaks the vacuum and lifts the membrane for easy removal with forceps. The vacuum support is availabe os a threaded adaptor to fit standard aboratory manifolds or os a stand-alone unit (primarily intended for field testing).
Ready-to-use S-Pale membranes
Millipore S-Pak 47 mm diameter white or black gridmarked filters are used together with the Microfil system. These filters have a pore size of 0.45pm and are presterilized and individual y sealed in peel-back envelopes, avoiding the risk of contamination.
Optional
EZ-Pak system
1 Paper spool
2 Film/paper spool Clips
3 Paper guide
4 Drive roller
5 Actuator
6 Plate
7 Separating bar
8 Tensioning spring (located under the back cover)
9 Film spool
10 Metal cover
11 Carrying handle
12 Membrane cartridge holder
Specifications
Materials of construction
Case: Stainless stell
Paint: Epoxy-baked
Dimensions and Weight
Height: 240 mm
Width: 160 mm
Depth: 235 mm
Weight: 3,6 kg
The EZ-Pak system consists of sterile membranes packed in a special pleated band within a cartridge and specially designed equipment to allow individual membrane dispensing.
EZ-Pak is designed to be used under standard «clean conditions» and with traditional membrane filtration methods.
With EZ-Pak, three delicate manipulations are eliminated: opening individual sterile envelopes, separating the membrane from its protective papers and removing the fragile membranes from their packaging.
The EZ-Pak cartridges contain 150 block or white gridded .47-mm diameters membrane, and should be used with the Microfilll filtration system for maximum ease of use, speed and cleanliness. Of course, EZ-Pak is also an ideal complement to traditional filtration equipment.
Optional
Vacuum Pump Millivac Miniature
Portable source of vacuum (to 160 mbar abs.) for continuous or intermittent operation. The pump is specifically suited as a vacuum source when filtering water or aqueous solutions in the laboratory.
Specifications
Materials
Air passing through the pump is in contact with the following materials:
PVC connection (Polyvinylchloride)
Hostalen head (Polypropylene)
Neoprene membrane (Polychlorobutadiene)
StainIess steel Clips
Electrical Specifications
230 V/50 Hz, 12 VV, 0.5 A.
Protection class: IP 21.
The pump is not explosion proof.
Connections: 3 conductor (grounded) cord ond plug.
Fluid connection
Tapered connection for 6 mm I.D. tubing.
Dimensions/Weight
156 mm length.
96 mm width.
136 mm height, including connector.
Height without connector: 101 mm.
Shipping weight: 2.2 kg.