Microm HM 500
Objektnummer | B00016523 |
---|---|
Seriennummer | 016523 |
Nome oggetto | Microm HM 500 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Firma: Microm
Modell: HM 500
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
TECHNISCHE DATEN HM 500 OM
Raumkühlung: +20°C bis -40°C
(bei +20°C Raumtemperatur) Auflösung 1°C
Abtauautomatik 1 x je 24 h
Objekt-Schnell- und Temperaturbereich +5°C - -55°C
Regelkühlung Auflösung 1°C
Schnittzähler rücksetzbar 3-stellig
Mikrotom: Schnittdickenbereich 0,5 - 90 µm
Auflösung: 0,5 µm von 0,5 - 2 µm
1 µm von 2 - 10 µm
2 µm von 10 - 20 µm
5 µm von 20 - 50 µm
10 µm von 50 - 90 µm
Trimmschnittdicke: 5 - 300 µm
Auflösung: 5 µm von 5 - 10 µm
10 µm von 10 - 100 µm
100 µm von 100 - 300 µm
Objektrückzug bei Aufwärtsbewegung 40 µm
Horizontale Objektbewegung 28 mm
Vertikale Objektbewegung 64 mm
Grobvorschub 800 µm/s
Objektfeinorientierung x/y/z-Achse
z- und y-Achse je +/-8°, z-Achse 360°
Objekttischgröße 30, 40, 50, 55, 60 mm
Schneideantrieb: Betriebsarten: Tasthub, Einzelhub, Dauerhub
Schneidegeschwindigkeit0,5 - 250 mm/s
Kühlraumbeleuchtung PL-L 18 W 84 4 P
Beheiztes Schiebefenster
Netzanschluß 220 V 60 Hz 8,1 A (+/-10%) 1800 VA
(max. Konfig.) 230 V 50 Hz 7,7 A (+/-10%) 1800 VA
240 V 50 Hz 7,2 A (+/-10%) 1800 VA
100 V 50 Hz 17,8 A (+/-10%) 1800 VA
100 V 60 Hz 17,5 A (+/-10%) 1800 VA
Lagerungsâ
temperaturbereich: -20°C bis +50°C
Betriebsâ
temperaturbereich: +5°C bis +40°C (bei max. rel. Luftfeuchte v. 60%)
Höhe bis zu 2000 m NN
nur in geschlossenen Räumen verwenden
Verschmutzungsgrad: 2
Überspannungskategorie: II
Abmessungen: Breite 840 mm, Höhe 1120 mm, Tiefe 780 mm
Gewicht: 230 V 180 kg
110/115 V 204 kg
BESCHREIBUNG VACUTOM für Kryostat HM 500 Serie
TECHNISCHE DATEN
Max. Objektgröße: 28 mm
Max. absaugbare Schnittdicke: 80 µm
Max. streckbare Schnittdicke: 80 µm
Min. streckbare Schnittdicke: 1 µm
Kryostat-Klingen für Magnetklingenträger MV: 60 x 19 mm
Schmalbandklingen für Einwegklingenträger EV: 80 x 8 mm
Breitbandklingen für Einwegklingenträger EV: 76 x 14 mm
Freiwinkeleinstellung:
Magnetklingenträger MV: 27°-32°
Einwegklingenträger EV: 5° - 15°
Betriebstemperaturbereich
der Kühlkammer: von -5°C bis -40°C
Einwegfiltervolumen: 0,27l
Mehrwegfiltervolumen: 0,27l
Netzspannungsangaben: Versorgung erfolgt durch das Kryostat-Gerät
in der jeweiligen Netzspannungsausführung
Betriebstemperaturbereich: +5°C bis +40°C (bei max. rel. Luftfeuchte von 60%) Höhe bis zu 2000 m NN