Soldé

Mettler Stromboli

Seriennummer: 017414
Status: Archived Product
Preis auf Anfrage
Excl. 19% VAT , excl. Shipping Cost
siehe Storeview
Descrizione:
Mettler Toledo KF-oven sample changer Stromboli. In combination with a KF-titrator DL 39 or DL 38 enable up to 13 samples á 20 mL. YoC 2007
Quotation
siehe Storeview
Maggiori Informazioni
Objektnummer B00017414
Seriennummer 017414
Nome oggetto Mettler Stromboli
Stato Archived Product

Gruppo prodotti: Titolatori

Non è stato trovato alcun prodotto corrispondente alla selezione.

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

 

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

 

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

 

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country

Possible payment methods

Comment

DE, AT, CH

Payment by invoice, payment in advance, payment by credit card

Payment by invoice is only possible for corporate clients.

NL, BE, LU

Payment by invoice, payment in advance, payment by credit card

Payment by invoice is only possible for corporate clients

Other countries

Payment in advance, payment by credit card

 

 

Our General Terms of Sale, Delivery and Payment are valid and are available for download here. 

The goods are offered subject to prior sale.

 

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status

Condition

Comment

Immediately available

Used The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock

Used

The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.

Published

Used

The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.

New device

new

The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.

Labprocure

Used

Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma:              Mettler

Modell:            Stromboli

Kommentar:   Dokumente deut.

 

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

Plug-n-Play:
Einfach Stromboli mit dem mitgelieferten Kabel an den Titrator anschließen und beide Instrumente einschalten. Sie sind nun für die erste Messung bereit. Stromboli wird vom Titrator gesteuert. Er verfügt über keinerlei Bedienelemente und benötigt keine spezielle Installation oder Konfiguration.

Einfache Probenhandhabung:
Die 20 ml-Probenfläschchen sind für eine schnelle und einfache Handhabung konstruiert: Einfach Probe einfüllen, das Probenfläschchen mit einer Folie bedecken und mit einer Gummimanschette verschliessen. Das große Volumen ist ideal für Proben mit niedrigem Feuchtigkeitsgehalt oder geringer Dichte.
Nach der Analyse können Sie die Dichtung wieder entfernen und sowohl Dichtung als auch Probenfläschchen erneut verwenden. Sie benötigen keine speziellen Werkzeuge und vergeuden kein Material.

Gas oder Luft:
Der Ofen kann mit einer Gaszuleitung im Labor oder mit einer optional erhältlichen Luftpumpe betrieben werden. Die Trocknungseinheit stellt sicher, dass das in das Instrument einströmende Gas vollständig trocken ist.

Ein Probenwechsler mit Trockenofen :
Temperaturbereich von 30-300°C.
Die Titration wird erst gestartet, wenn die eingestellte Ofentemperatur erreicht ist.
Die Ofentemperatur wird auf dem Ausdruck dokumentiert.

Klare Anzeige :
Stromboli zeigt die aktuelle und die voreingestellte Ofentemperatur in großen blauen erleuchteten Ziffern auf der Oberseite des Instruments an.

Drift- und Blindwertbestimmung:
Driftbestimmung zur Kompensation von Feuchtigkeit, die durch das Trägergas eingebracht wird.
Blindwertbestimmung zur Kompensation von Feuchtigkeit aus dem Fläschchen und dem Trägergas.
Die Werte können entweder manuell eingegeben, vor einer Serie automatisch bestimmt oder von der letzten Messung übernommen werden. Eine oder mehrere Drift- und Blindwertpositionen können in der

Titratormethode frei definiert werden.

 

 

Technische Daten

Temperature range            50...300°C

Temperature accuracy      ± 3°C

Dimensions overall            250 x 400 mm

Höhe                                   300 mm

Voltage (auto selection)     100....240 VAC

Power consumption           164 VA

Gewicht                              5 kg

 

Part of labexchange logo
Search engine powered by ElasticSuite