manufacturer:   Memmert

model:              INE 200

annotation:       Dokumente engl.

The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:

           DELAYED ON

           HEATING UP

           HOLD or HOLD set-temperature-dependent with guaranteed holding time

           COOLING DOWN

• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value and actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger – 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• works calibration certificate for +37 °C

Triple Overtemperature Protection 

• in case of overtemperature due to failure, the heating is switched off at approx. 3 °C above the set temperature (fixed value)
• independently working, digitally adjustable electronic overtemperature controller TWW protection class 3.1
• resolution of display and setting accuracy: 0,1°C
• mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10°C above max. oven temperature

Textured Stainless Steel Casing

•  w x h x d: 710 x 760 x 550 mm
• fully insulated stainless steel door with double locking and 4-point adjustment
• inner glass door
• rear zinc-plated steel

Interior - Heating Concept 

• w x h x d: 560 x 480 x 400 mm, 108 l
• easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
• 2 stainless steel grids

Temperature Range 

• from +30 °C (however, at least 5 °C above ambient) up to +70 °C

Voltage / Power Rating 

• 230 V (+/- 10%), 50/60 Hz
• 900 W (during heating)
• adaption of effective heating power depending on the set temperature

Packing Data 

• net weight approx. 54 kg
• gross weight carton approx. 68 kg
• dimensions approx.:  

             carton w x h x d: 82 x 97 x 67 cm

• the appliances must be transported upright

Gruppo prodotti: Incubatori