Maggiori Informazioni
Objektnummer	B00017865
Seriennummer	017865
Nome oggetto	Linseis L75D1000
Stato	Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma: Linseis

Modell: L75D1000

Kommentar: Dokumente deut.

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

Im folgenden sind die technische Daten für Model: L75VS1550, L75VD1550 aufgeführt,

diese sind mit L75D1000 identisch.

TECHNISCHE DATEN

L75 Dilatometer

Temperaturbereich RT bis 1550°C

Aufheizrate 0.1 bis 20°C/min.

Meßbereich +/- 25 2500µm

Max. Vakuum 10³ mbar

Auflösung +1- 14nm

Genauigkeit +1- 1% von Vollausschlag

Reproduzierbarkeit +1- 150 nm

L75/150 AL203 Absolut-Meßsystem

Max. Probengröße 6 mm dia.

L75/170 Al203 Absolut-Meßsystem

Max. Probengröße 12 mm dia.

L75/151 Al203 Differential-Meßsystem

Max. Probengröße 6 mm dia.

L70/2001 Datenerfassunqs- und Temperaturregierkarte

PID Kontrolle ein- oder zweistufiger Kaskaderegler

Thermoelemente 18 versch. Typen

Auflösung 1/10..1/16K

Eingänge 4 Analogeingänge +/- IV, Auflösung 0.05 mV

Ausgänge 4 getrennte offene Kollektor Kontrollausgänge

Datenerfassungsrate 0.1 s bis 3600 s

Abtastrate 0.1s

Temperatursegmente 16 programmierbare Temperatursegmente

Aufheizrate 0-100 K/min. Auflösung 1K/min.

L70/2171 Tyristor Stellglied

Eingang 15 Amp., einphasig 230VAC

Eingangsanschluß Schuko-Stecker

Ausgang 35V/60V/150V

Anschlußvoraussetzungen

Platzbedarf, Stromversorgung, Wasseranschlüsse,

Platzbedarf

Platzbedarf auf einem Arbeitstisch für Computer, Drucker, Dilatometer und Verstärker (HxBxTincm)

Computer: normalerweise Mini Tower-Ausführung und Monitor

Verstärker 10 x 44,4 x 44,4 innerhalb 2 m des Gerätes

Aufstellungsfläche: Thyristor Gerät, 60 x 60 x 60

AC Spannungsanforderungen:

Menge 4-6 Buchsen SCHUKO-STECKER Einfachphase, 230 VAC, 15 Amp. Für Computer, Drucker, Zubehör.

Menge 1 Buchse SCHUKO-STECKER Einfachphase, 230 VAC, 15 Amp. für Thyristor Stromversorgung.

Während das Gerät in einer normalen Laborumgebung richtig funktioniert, empfehlen wir einen separaten Kreis, wenn unübliche Leitungsstörungen auftreten. Solche Störungen beinhalten starten und anhalten großer Motoren, starten großer Widerstandsbelastungen, oder Kondensatorentnahme. AC Störspitzen auf der Stromversorgung können Ausdehnungsmessungen beeinflussen.

NB: die 230 VAC Stromversorgung können auf 208 VAC geändert werden, bitte bei Linseis wegen notwendigen Änderungen anfragen.

NB: Steckdosen können ersetzt werden durch erprobten Ersatz, bitte bei Linseis wegen notwendigen Änderungen anfragen.

Kühlwasser

Fließrate min.: ca. 0.5 L/min.

Die Temperatur: des Kühlwassers muß konstant gehalten werden zwischen Raumtemperatur und 10°C

Die Wasserzufuhr muß über ein Absperrventil abschaltbar sein für 6 mm Wasserschlauch. Geschlossene Kühlkreisläufe sind auch möglich.

Gruppo prodotti: Analizzatore Parametri Specifici

Non è stato trovato alcun prodotto corrispondente alla selezione.