Laarmann LMC 100-D
Objektnummer | B00019981 |
---|---|
Seriennummer | 019981 |
Nome oggetto | Laarmann LMC 100-D |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
manufacturer : Laarmann
model : LMC 100-D
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Laarmann Jaw Crushers for Coarse Primary Crushing and Mid Range Primary Crushing
Laarmann Jaw Crushers are well proven single toggle, high reduction Jaw Crushers. The crushing capacity and the end-fineness of the sample material depends on the type of crusher and on the breaking characteristics of the sample material.
Laarmann Crushers are designed for laboratory applications and for operating environments and accepts soft to hard ores, drill cores, rocks, alloys, stags, soils, ceramics and similar hard and brittle materials.
Superior Jaw Crusher engineered for pre-crushing of extremely hard up to brittle materials
The Laarmann LMC Jaw Crusher is designed for batchwise and continuous pre-crushing of middle hard, hard brittle and tough materials for the following fine grinding.
Principle of operation
The Model LMC Jaw Crusher is used by laboratories and processing companies to crush solid materials such as rocks or soil and ores. The material to be processed falls into the crushing chamber of the LMC Crusher via a guide chute and is crushed by crushing action of a static and a dynamic jaw plate until it passes the pre-selected gap of the crusher. The stepless gap setting can be adjusted via a hand wheel and a mm scale from 0 mm to 25 mm (contact of the jaw plates). This adjustment setting enables the operator as well to perform a zero point calibration setting to adjust the crusher.
Easy cleaning and operation
No other Jaw Crusher is easier to clean then the LMC Jaw Crusher. When the crushing process is finished the infeed hopper can be taken off in a second and the front door can be opened. Due to these points the crushing chamber is fully accessible for quick and easy cleaning in order to perform a fast and systematic cleaning of the grinding tools.
Features and benefits
- Better crushing performance due to 3000 Watt (strong 3 phase motor)
- Optimum crushing results
- Easy and quick access to the crushing chamber (no tool required)
- Stepless adjustment of gap setting (no tool required)
- CE certified
- Removable infeed hopper with safety baffles or batch loader
- High precision solid steel underframe (available with castor wheels lockable)
- Solid and spacious 10 litre sample collector
- Motor protection switch with start/stop
- Endfineness < 2 mm
- Contamination free crushing because of 4 different grinding tools*
- Easy exchange of jaw plates and side liners
Applications
- Minerals / ores / slags
- Cement / cement clinker / concrete
- Glass / ceramics / corundum
- Soil samples / sludges
- Coal / coke / drill core
- Industrial waste
Technical Data
Jaw Inlet
130 x 100 mm
Maximum feed size
115 x 90 mm
Adjusting range of Jaw outlet
0 - 25 mm
Product sizing at minimum adjustment
<2 mm
Throughput
250 kg/h
Dust extraction point
1
Dust extraction flow
150 litre /s
Electrical requirements (3 phase)
3 kW
Toggle speed
325 rpm
Approximate mass
250 kg gross