Archivio

Kontron Centrikon T-1170

Seriennummer: 019599

Stato: Archived Product

Spedizione:

Descrizione:

Kontron Centrifuge Centrikon T-1170. With swing-out rotor TST 28.38, speed range 28.000 rpm. With fixed angle rotor TFT 50.38, max.speed range: 50000 rpm. For 12 tubes of 25x89 mm or 38,5 mL or 1x 3,5\". Regularly maintenance

siehe Storeview

Vai alla fine della galleria di immagini

Vai all'inizio della galleria di immagini

Maggiori Informazioni
Objektnummer	B00019599
Seriennummer	019599
Nome oggetto	Kontron Centrikon T-1170
Stato	Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

manufacturer : Kontron

model : Centrikon T-1170

annotation : Dokumente engl .

The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.

Overview

The Ultracentrifuge T-1100 is a milestone in the state-of-the-art of centrifugation, thanks to a flexible architecture approach it can be implemented as a stand-alone machine and upgraded to a sophisticated PC-remote-controlled T-2100 according to your laboratory needs.

Specifications

Drive

Maintenance-free, direct drive
(60,000 to 90,000 rpm ± 20 rpm accuracy at constant rotor speed)

Speed- preselection in increments of 100 rpm

Closed, forced lubricating system
Internal or external water cooling
Stabilization bushing
Extremely slow acceleration from 0 to 800 rpm and free coasting ≤ 800 rpm with the slow submode selection
5 acceleration settings above 800 rpm
Accepts KONTRON, BECKMAN and SORVALL rotors (up to 30 different types)

Temperature system

Radiometer measurement: 0.1 °C resolution

Working temperature range: 0-45 °C

Over-temperature cut-out: 1-46 °C

Temperature preselection : in increments of 0.2 °C

Temperature constancy

In the rotor: ± 0.1 °C

Refrigerant gas: Freon R22

Electrical heating: separate heating belt 150 W

Vacuum

Better than 0.5 Pa/14-segment LED display for vacuum threshold values

Parameter Display

Digital actual- and preset-value displays for:

- Rotor speed: 5 digits

- Elapsed time/ ω² t 0-99 hrs, 59 min, or ω²t x 10 ⁸ (*)

(*) Exponent settable from 8 to 30 by KONTRON INSTRUMENT SERVICE on request

- Rotor temperature: 0 45 °C

Safety System

Error indicators with audible alarm
Message panel featuring operating modes, parameters, status, errors and file indicators
Automatic restart after power or water failure when speed is ≥ 1,000 rpm, if the speed is lower the machine brakes to zero after power restart
Recall button for lowest rotor speed, rotor temperature and interruption time after an auto restart following a power or water failure
Photoelectronic overspeed safety system with early max. rotor speed check
Dynamic, imbalance control effective up to top speed
Locking of keiyboard and zonal centrifugation by a key switch
Soft-touch keyboard with control indicators
Connection for external central alarm units
Bio-hazard protection kit (option)
Automatic rotor overspeed detection

Mode choice

3 chamber preconditioning modes:

- drying

- precooling

- drying and precooling

3 centrifugation modes:

- normal

- zonal

- step

3 operation submodes :

- slow on/off

- brake on/off

- option (Reduced vacuum level)

Setting of run-time, rotor speed and rotor temperature for up to 5 steps
Direct acceleration program for low mass rotors with rotor discrimination
Preselection of run-time up to 99 hrs, 59 min or hold
ω²t integrator up to 99999 x 10 ⁸ or to 10 ³⁰
Quartz clock for delayed self-start up to 99 hrs, 59 min

Programmable files

32 program files for repeat runs
Multi-user protection by means of 7 passwords
2-year data retention in lithium battery powered memory

Gruppo prodotti: Centrifughe diverse

Non è stato trovato alcun prodotto corrispondente alla selezione.