Julabo F25 MW
Objektnummer | B00012944 |
---|---|
Seriennummer | 012944 |
Nome oggetto | Julabo F25 MW |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Bedienungs- und Funktionselemente
la/lb Netzschalter, beleuchtet Thermostat / Kältemaschine
2 Taste Start / Stop
3 Taste-Sollwertanzeige Arbeitstemperatur
4 Taste-Sollwertanzeige Arbeitstemperatur
5 Taste-Sollwertanzeige Übertemperatur
6 Taste-Sollwertanzeige Untertemperatur
7 Taste-Sollwertanzeige Sicherheitstemperatur
8 Einstellbarer Übertemperaturschutz (DIN 12879, Sicherheitstemperatur)
9 MULTI-DISPLAY (LED) Temperaturanzeige
10 Cursor-Tasten (links/rechts)
11 Editier-Tasten (höher/niedriger)
12 Enter-Taste (speichern)
Kontroll-Lampe - Alarm
Kontroll-Lampe - Kühlung
Kontroll-Lampe - Heizung
13a Anschlußbuchse: Steuerleitung für Kältemaschine
13b Anschlußbuchse: Kältemaschine (nicht F12)
14 Anschlußbuchse: Schnittstelle RS 232 C
15a Netzsicherungen für Thermostat
15b Netzsicherungen für Kältemaschine
16a Netzkabel des Thermostaten
16b Netzkabel mit Stecker
17 Einbausteckdose für Thermostatenanschluß
18 Wahlschalter für Kältemaschine (nur F25, F26, F34) Stellung "1"
19 Steuerleitung für Kältemaschine
21 Lüftungsgitter, abnehmbar
22 Ablaßschraube
23 Ablaufstutzen
24a Pumpenanschluß: MV - Vorlauf, MW - Druckpumpe
24b Pumpenanschluß: MV - Rücklauf, MW - Saugpumpe
25 Kühlwasseranschlüsse
Die JULABO Kälte-Umwälzthermostate bestehen aus der Temperiereinheit und der Kältemaschine mit Kältebadgefäß und sind für die Temperierung flüssiger Medien vorgesehen.
Neben dem Kälteaggregat sind die Haupt-Funktionselemente sind Heizer, Umwälzpumpe und Regelelektronik. Die elektronische PID-Regelung paßt die Wärmezufuhr automatisch dem erforderlichen Bedarf im Bad an.
Die Bedienung dieser Thermostate erfolgt über eine spritzwassergeschützte Folientastatur. Die Mikroprozessortechnik erlaubt es, vier unterschiedliche Temperaturwerte einzustellen, zu speichern und über das MULTI-DISPLAY (LED) anzuzeigen. Zwei dieser Werte sind für Arbeitstemperaturen, die schnell und mit bester Reproduzierbarkeit über Tastendruck angewählt werden können. Zwei weitere Werte sind für Über- und Untertemperatur-Warnfunktionen vorgesehen.
Der Übertemperaturschutz nach DIN 12879 ist eine vom Regelkreis unabhängige Sicherheitseinrichtung deren Sicherheitswert ebenfalls über das MULTI-DISPLAY (LED) angezeigt und eingestellt werden kann.
Die RS 232 Schnittstelle nach NAMUR erlaubt modernste Verfahrenstechnik ohne zusätzliches Interface, direkt On-Line vom Thermostaten in Ihre Problemlösung, in Ihr ISO 9000 Überwachungssystem.
Technische Daten
F25
Arbeitstemperatur Bereich °C -28...200
Temperaturkonstanz K ±0,01
Kälteleistung °C +20 0 -20
Medium Ethanol W 260 200 60
Kältemittel R 134a
Umgebungstemperatur °C 5...40
Netzanschluß ±10% V/Hz 230/50
Gesamtleisuntgsaufnahme W 250
Badöffnung (BxL) mm 120x140
Badtiefe mm 150
Füllmenge Liter 3...4,5
Gesamtabmessungen mm 230x420x600 (BxTxH)
Gewicht kg 30,0
MW
Temperatureinstellung digital
Lokal mit Folientastatur Anzeige am MULTI-DISPLAY (LED)
Remote mit PC Anzeige am Bildschirm
Temperaturanzeige MULTI-DISPLAY (LED)
Auflösung K 0,1
ATC-Funktion K ±3
Temperaturregelung PID
Arbeitstemperaturfühler PT 1000
Sicherheitstemperaturfühler PT 1000
Heizleistung W 2000
Druckpumpe:
Druck max. (bei 0 Liter) mbar 290
Förderstrom max. (0 bar) l/min 20
Saugpumpe:
Sog max. (bei 0 Liter) mbar 180
Förderstrom max. (0 bar) l/min 14
Anschlußmöglichkeiten
Externer Alarmgeber 24-0 Vdc / max. 25mA
Rechnerschnittstelle RS232C
Leistungsaufnahme W 2150