Jouan J30
Objektnummer | B00021874 |
---|---|
Seriennummer | 021874 |
Nome oggetto | Jouan J30 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
model : J30
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
LIFTING AND TRANSPORT
The apparatus must be supported from underneath when Lifting and transporting, and only after the heating elements have completely cooled down and the tank has been emptied.
ENVIRONMENTAL CONDITIONS
This instrument is designed to operate safely under the following conditions :
- Indoor use.
- Temperature : 5°C to 40°C.
- Maximum relative humidity of 80% for temperatures up to 22°C.
- Maximum altitude : 2000 m.
Maximum performance is assured across the following temperature range : 15 ° C to 25 ° C.
Use the apparatus in a clean and non corrosive environment. The tank of the water bath must be placed an a flat and horizontal surface capable of supporting the weight of the tank filled with water :
J 12 = 20 kg PBX 18 = 19 kg
J 18 = 25 kg PBX 30 = 26 kg
J 30 = 36 kg
MAINS SUPPLY
230 V ± 10 % -50 Hz 16A + earth
120 V ±10 % - 60 Hz 16A + earth
Remember that in order to respect the electrical safety standards related to protection against indirect contact, the supply of power to the instrument must be via a power socket fitted with a protection device ensuring automatic cut off in the case of an insulation fault. A supply fitted with a circuit breaker of the correct rating complies with this requirement
INSTALLATION
Mount the regulator / heating element assembly in the water bath in such a way that :
- The heating elements do not come into contact with the sides or base of the bath.
- The regulator is fitted to the edge of the bath. Ensure that it is well positioned and correctly heated.
DIMENSIONS AND WEIGHT
W x d x h (mm) Opening (mm) Net weight
PBX 18 35.5 x 34.5 x 27.2 27.5 x 30 3.7 kg
PBX 30 53x 34.5x 27.2 45x 30 5.4 kg
J 12 28.5 x 34.5 x 30.7 18.5 x 30 9.2 kg
J 18 37.5 x 34.5 x 30.7 27.5 x 30 10.8 kg
J30 55x 34.5 x 37 45 x 30 16.1 kg
ELECTRICAL SPECIFICATIONS
Mains : 230 V - 50 Hz or 120 V - 60 Hz
PERFORMANCE
Display resolution 2°C
Homogeneity @ 37°C ± 0.3 °C
Stability @ 37°C ± 0.5 °C
Volume : J 12 12 litres
J 18, PBX 18 18 litres
J 30, PBX 30 30 litres
Power : J 12 ,J 18, PBX 18 1200 W
J 30, PBX 30 2500 W