Cappe a Flusso Laminare

Labexchange LX-11-D

4.990,00 €
Excl. 19% VAT , excl. Shipping Cost
5.938,10 € incl. Vat
Seriennummer: 35175
Stato: Nuove attrezzature?This is a new device. The equipment is unused and factory sealed. For new equipment the warranty of the manufacturer and the statutory warranty period shall apply.
Spedizione: 4-6 weeks
Descrizione:
Labexflow Banco da lavoro di sicurezza LX-11-D.
Con base arrotolabile. 2 display digitali.
Flusso d'aria verticale. Volume d'aria da 0 a 1020 m³ / h.
Flusso d'aria laminare 0,3 m / s. Sistema di interblocco.
Lavagna magnetica a sinistra all'interno.
Compresi filtri pre e HEPA. Illuminazione UV e fluorescente.
Valvola aria e vuoto.
Dimensioni esterne AxLxP: 187 x 113,5 x 64,7 cm.
Dimensioni interne AxLxP: 67 x 94,5 x57cm.
230V. 60 Hz. Classe ISO 4 secondo ISO 14644-1.

NUOVO DISPOSITIVO!
Installation
Eseguiamo l'installazione di questo dispositivo di laboratorio in modo professionale. Saremo lieti di offrirvi l'installazione di questo dispositivo di laboratorio per 680€, escluse le spese di viaggio.

Usually, laboratory and analysis devices are very exigent system with a very own specifications and requirements. Therefore, the startup of a laboratory device often rises the question how to assemble, adjust and to launch it.


We would be pleased to take over the professional installation of your laboratory devices!

Please contact us.


Benefit from the installation by us in more than one way:

  • Immediate and smooth startup of your laboratory device
  • A professional installation extends the lifetime of your laboratory device
  • Guarantee extends to 3 months
  • Freight charges do not apply*
  • You are entitled to benefit from the Labexchange Repurchase Guarantee.

* products of the product groups laboratory furniture and laminar flow are excluded. In individual cases, other product groups can be excluded.


Add to Offer list
Maggiori Informazioni
Objektnummer B00035175
Seriennummer 35175
Nome oggetto Labexchange LX-11-D
Stato Neugerät
Fabbricante Labexchange
Spedizione 4-6 weeks

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

 

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

 

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

 

Terms of payment

We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country

Possible payment methods

Comment

DE, AT, CH

Payment by invoice, payment in advance

Payment by invoice is only possible for corporate clients.

NL, BE, LU

Payment by invoice, payment in advance

Payment by invoice is only possible for corporate clients

Other countries

Payment in advance

 

 

Our General Terms of Sale, Delivery and Payment are valid and are available for download here. 

The goods are offered subject to prior sale.

 

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status

Condition

Comment

Immediately available

Used The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock

Used

The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.

Published

Used

The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.

New device

new

The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.

manufacturer:      Labexchange Labexflow

model:                  LX-11-D

 

 

The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.

 

 

Air flow type Vertical laminar flow
Air volume (minimum / maximum) 0 to 1020 cmh
Laminar airflow velocity (m/s) 0.3
Air cleanliness within work space ISO 14644-1 class 4, US Federal Standard 209E class 10
Filters HEPA filter Typical efficiency of 99.99% on 0.3㎛ (US MIL- STD -282); Micro glass fiber Media, Particle board, AL separator, Neoprene gaskets
 
Pre filter Polyester fibers with an filter efficiency of 85% (A·F·I TEST); Aluminum frame, Polyester fiber media
 
Noise level Typically < 65dB at blower speed
Materials Main body Steel powder coating
Work surface Stainless steel grade 304, Hairline treatment
Windows (front / side) Colorless and transparent UV absorbing 5mm tempered glass
Illumination Intensity (lux) > 650
Fluorescent lamp (W) 30 x 2ea
Electronically ballasted Fluorescent Lamp
UV lamp (W) 25 x 1ea
Electronically ballasted UV Lamp
Electric socket outlets 230V socket
Dimension(W×D×H) Interior (mm) 945×570×670
 
Exterior without stand (mm) 1135×647×1150
 
Exterior with stand (mm) 1135×647×1870
 
Net weight (body) (kg) 140
Net weight (body + stand) (kg) 170
Electrical requirements (230V, 1ph) 60Hz / 1.25 A, 50Hz / 1.38 A

 

 

Gruppo prodotti: LAMI

Back to Top
part-of-labexchange-group
Search engine powered by ElasticSuite
Labprocure