Isco SCFE
| Objektnummer | B00018428 |
|---|---|
| Seriennummer | 018428 |
| Nome oggetto | Isco SCFE |
| Stato | Archived Product |
Gruppo prodotti: SFC / SFE
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer : Isco
model : SCFE
annotation : Dokumente engl .
SFX 220 Extractor technical specifications
Dimensions
Height: 10" (25.4 cm)
Width: 10.5" (26.7 cm)
Depth: 8.5" (21.2 cm)
Net Weight
30 lb (13.6 kg)
Electrical Requirements
110 Vac ± 25 Vac (7.5 A)
220 Vac ± 31 Vac (3.5 A)
Line Frequency
50/60 Hz
Power Consumption
820 Watt (not including pump)
Ambient
0°C to 40°C
Humidity
0% to 90% non-condensing environment
Temperature Control Limits
Ambient to 150°C
Maximum Operating Pressure
10,000 psi (70 MPa )
Wetted Materials
Stainless steel; Type 303, 304 and 316 stainless steel; Nitronic 60; Teflon Tm ;
PEEK Tm ; artificial ruby and sapphire; 17-4 PH stainless steel
Minimum Valve Life
50,000 cycles at 150°C and 10,000 psi
D Series pump specifications
Power Requirements
100 ± 10 Vac , 250 VA maximum
117 ± 12 Vac , 250 VA maximum
234 ± 23 Vac , 250 VA maximum
Line Frequency
50 or 60 Hz
Line Voltage Noise Tolerance
1.7 x nominal rms line voltage, 10 µsecond pulses, any phase angle, random or repetitive
Dimensions
Pump Controller
------------------------------------------------------------------------
Width: 27.18 cm (10.7") 27.18 cm (10.7")
Depth: 46.74 cm (18.4") 30.48 cm (12")
Height: 101.09 cm (39.8") 13.59 cm (5.35")
Weight
Pump Controller
------------------------------------------------------------------------------------------------------
100DX 32.8 kg (72.4 lbs ) 2.96 kg (6.53 lbs )
260D 31.9 kg (70.3 lbs.)
100DX 0.01 µl/min to 50 ml/min (for any pressure up to 10,000 psi )
260D 1.0 µ1/min to 97 ml/min (for delivery at a pressure below 4,000 psi )
1.0 µ]/min to 90 ml/min (for any pressure up to 7,500 psi )
Flow Rate Accuracy*
100DX ± 0.3% (maximum 0.25 µl/min seal leakage)
260D ± 0.5% (maximum 0.50 µl/min seal leakage)
Flow Rate Display Resolution
100DX 0.01 µl/min [1.0 µl/min in Constant Pressure Mode]
260D 1.0 µ lmin
Displacement Resolution
100DX 9.65 nl
260D 16.63 nl
Refill Time
100DX 1.72 minutes
260D 2.5 minutes
Refill or Depressurization Rate (At any pressure from 0 to 10,000 psi )
100DX 0.01 µl/min to 60 ml/min
260D 1.0 µl/min to 107 ml/min
Pressure Accuracy
± 2% of full scale
Pressure Repeatability
± 1% of full scale within 48 hours
Pressure Display Resolution
1.0 psi
Ambient
0 to 40 °C
Humidity
100% relative humidity maximum up to 20 °C and 90% above
20 °C if left connected to the mains
Cylinder Capacity
100DX 102.93 ml
260D 266.05 ml
Dead (Headspace) Volume**
100DX 1.30 ± 0.020 ml
260D 2.10 ± 0.020 ml
* Using water at 2,000 psi and temperature controlled environment at 30 °C.
**NOTE: Volume in and above the piston seal, head clearance at automatic shutoff, and inlet
and outlet Ports to the fittings.
Il tuo Labexchange-Team sarà lieto di aiutarvi:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
