Back to Top
Archivio
IKA MF 10 basic
Descrizione:
siehe Storeview
| Objektnummer | B00012909 |
|---|---|
| Seriennummer | 012909 |
| Nome oggetto | IKA MF 10 basic |
| Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
IKA MF 10 basic
Mikrofeinmühlen-Antrieb
Kontinuierlich arbeitende Universalmühle.
- Leistungsstarker Antrieb
- Leicht zu reinigende Arbeitsfläche aus Edelstahl - Wahlweise 2 verschiedene Mahlköpfe
einsetzbar
- Mahlköpfe leicht austauschbar
|
Technische Daten |
|||
|
Processtyp [-] |
inline |
Arbeitsprinzip [-] |
cutting/impact |
|
Motorleistung Aufnahme [W] |
1 000 |
Motorleistung Abgabe [W] |
500 |
|
Drehzahlbereich [1/min] |
3000 - 6500 |
Einschaltdauer EIN [min] |
120 |
|
Einschaltdauer AUS [min] |
30 |
Mahlkammer, mit Wasser kühlbar [-] |
nein |
|
Mahlgut in der Mahlkammer mit Trockeneis kühlbar [-] |
ja |
Mahlgut in der Mahlkammer mit Flüssigstickstoff kühlbar [-] |
nein |
|
Abmessungen (B x H x T) [mm] |
320 x 380 x 300 |
Gewicht [kg] |
9.7 |
|
Zulässiger Umgebungstemperaturbereich [°C] |
5 - 40 |
Zulässige Relative Feuchte [%] |
80 |
|
Schutzart nach DIN EN 60529 [-] |
IP 22 |
Schnittstelle RS 232 [-] |
nein |
|
Analogausgang [-] |
nein |
Spannung [V] |
230 / 115 |
|
Frequenz [Hz] |
50/60 |
Geräteaufnahmeleistung [W] |
1000 |
Zubehör optinal, je nach Austattung
Siebe
Austauschbarer Sieb zum Einlegen in die Mahlköpfe garantiert eine maximale Korngrößenbegrenzung.
Schneidmahlkopf
Zur Zerkleinerung von faserigen Stoffen wie Papier und Pflanzenmaterial, aber auch für Kunststoffe u.a. Material mit geringem spezifischem Gewicht. Vor dem Austritt passiert das Mahlgut ein Sieb, Dieses Sieb iaustauschbar und in verschiedenen Lochgrößen lieferbar (nicht im Lieferumfang enthalten). Das Mahlgut kann z.B. mit einem NS 29 Normschliff-Gefäß aufgefangen werden.
Processtyp inline
Umfangsgeschwindigkeit max. 22.5 m/s
Aufgabekorngöße max. 15 mm
Material Mahlkammer Edelstahl 1.4308
Mahlkammer, mit Wasser kühlbar nein
Mahlgut in der Mahlkammer
mit Trockeneis kühlbar ja
Mahlgut in der Mahlkammer
mit Flüssigstickstoff kühlbar nein
Breite 320 mm
Tiefe 300 mm
Höhe 560 mm
Gewicht 2,2 kg
Prallmahlkopf
Zur Zereinerung von spröden, harten Materialien wie Mineralien, Baustoffe bis Mohshärte 6. Vor dem Austritt passiert das Mahlgut ein Sieb. Dieses Sieb iaustauschbar und in verschiedenen Lochgrößen lieferbar (nicht im Lieferumfang entha en). Das Mahlgut kann z.B,m einem NS 29 Normschliff-Gefäß aufgefangen werden.
Processtyp inline
Umfangsgeschwindigkeit max. 31.4 m/s
Au abegut ärte max. 6 Mohs
Aufgabekorngöße max. 10 mm
Material Mahlkammer Edelstahl 1.4308
Mahlkammer, mit Wasser kühlbar nein
Mahlgut in der Mahlkammer
mit Trockeneis kühlbar ja
Mahlgut in der Mahlkammer
mit Flüssigstickstoff kühlbar nein
Breite 320 mm
Tiefe 300 mm
Höhe 450 mm
Gewicht 2.7 kg
Gruppo prodotti: Mulini / Tritatori
Domande?
Il tuo Labexchange-Team sarà lieto di aiutarvi:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
