Holten LB 48
Objektnummer | B00016066 |
---|---|
Seriennummer | 016066 |
Nome oggetto | Holten LB 48 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Holten
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Funktionsprinzip
Die Sicherheitswerkbank nach DIN 12950 Teil 10/10.1991, Klasse 2 ist ein Laborgerät, bei dem im Experimentierraum eine weitgehend turbulenzarme (laminare) Verdrängungsströmung von durch Hochleistungs-Schwebstoff-Filter geleiteter Luft herrscht.
Die Abluft wird ebenfalls durch Hochleistungs-Schwebstoff-Filter geleitet.
Die Frontseite der Werkbank ist im Betrieb teilweise etwas geöffnet.
Der obere Teil besteht aus einer zu öffnenden Sichtscheibe.
Unterhalb der Sichtscheibe befindet sich die Arbeitsöffnung.
Luftströmung
Hochleistungs-Schwebstoff-Filter,
Hauptfilter
Abscheidegrad von 99,999 % bezogen auf eine Partikelgröße von 0,3 µm.
Die in den Experimentierraum eintretende Luft wird entsprechend den Anforderungen der DIN 12950 gefiltert.
Hochleistungs-Schwebstoff-Filter,
Abluft(Fortluft)-Filter
Abscheidegrad von 99,999 % bezogen auf eine Partikelgröße von 0,3 µm.
Vor dem Austritt in den Aufstellungsraum wird die Abluft entsprechend den Anforderungen der DIN 12950 gefiltert.
Luftströmung
Der Innenraum und die Filter werden strömungstechnisch überwacht, eine auftretende Störung der Luftströmung wird optisch und akustisch gemeldet.
Befindet sich die Sichtscheibe nicht in Arbeitsposition, wird dies optisch und akustisch gemeldet.
Aufbau
Die Werkbank besteht aus:
Stahlblechgehäuse mit höhenverstellbarem Untergestell
Experimentierraum
Lüftungssystem
Steuerungs- und Überwachungssystem
Der Experimentierraum wird durch Experimentierraumrückwand, Seitenscheiben, Sichtscheibe, Arbeitsplatte und Hauptfilter gebildet.
Der Hauptfilter ist über dem gesamten Experimentierraum angeordnet.
Der Boden dient gleichzeitig als Auffangwanne für verschüttete Flüssigkeiten.
In der Rückwand des Experimentierraumes ist eine Schutzkontaktsteckdose für zusätzliche Hilfseinrichtungen angebracht.
Die Sichtscheiben sind aus schlagfestem Kunststoff.
Der Arbeitstisch besteht aus einer, zur Reinigung leicht herausnehmbaren, durchgehenden Arbeitsplatte.
An der Unterseite der Rückwand und im vorderen Arbeitsbereich sind die zur Luftzirkulation notwendigen Lüftungsschlitze angebracht.
Technische Daten
Abmessungen:
|
LB 48 C / GS |
L (Breite) |
1265 mm |
Abluftstutzendurchmesser (Option) |
160 mm |
Höhe Abluftanschluß (Option) |
315 mm |
Maße Experimentierraum |
|
Höhe |
705 mm |
Breite |
1200 mm |
Tiefe |
600 mm |
Auffangwanne |
ca. 10 l |
Gewicht |
ca. 200 kg |
Abluftvolumenstrom |
ca. 400 m 3 /h |
Schall-Leistungspegel (bez. auf 1 pW) |
60 dB |
Schall-Druckpegel (bez. auf 20 pPa) |
< 55 dB(A) |
Nennspannung |
1 PE AC, 230 V; 50 Hz |
Nennaufnahme |
0,5 kW |
Netzabsicherung |
16 A |
Schutzkontaktsteckdose* |
230 V, T 6 A |
VERWENDETE WERKSTOFFE
Außengehäuse Stahlblech, mit Polyesterbeschichtung
Untergestell Stahlrohr, mit Polyesterbeschichtung
Arbeitsplatte Rostfreier Stahl
Auffangwanne Stahlblech, mit Polyesterbeschichtung
Sichtscheiben Polycarbonat (PC), klar
Hauptfilter Rahmen: Aluminium
Rahmendichtung: Polyurethan, zwischen Rahmen und Aufnahme
Filtereinlage: Glasfaserpapier, wasserfest
Einlagedichtung: Polyurethan, zwischen Filtereinlage und Rahmen
Abluft(Fortluft)-Filter Rahmen: Aluminium
Rahmendichtung: Polyurethan, zwischen Rahmen und Aufnahme
Filtereinlage: Glasfaserpapier, wasserfest
Einlagedichtung: Polyurethan