Hermle Z 383 K
Objektnummer | B00012542 |
---|---|
Seriennummer | 012542 |
Nome oggetto | Hermle Z 383 K |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Die Zentrifugen die mitdenken
Sind hohe Drehzahlen erforderlich? Gilt es eine große Anzahl an Einzelröhrchen unterzubringen? Kein Problem für die Zentrifugen Z 383 und Z 383 K. Eine intelligente Mikroprozessorsteuerung macht sie so flexibel.
Flexibel und intelligent
Rotoren und deren technische Daten werden automatisch erkannt.
Dadurch kann die Anzeige jederzeit von Drehzahl auf RZB-Wert umgestellt werden. Nicht einmal eine versehentlich zu hoch vorgewählte Drehzahl bringt die beiden Zentrifugen aus dem Konzept.
Der Rotor wird nicht abgebremst, sondern dreht sich mit seiner zul. Höchstgeschwindigkeit. Die Möglichkeit einer Fehlbedienung ist damit praktisch ausgeschlossen. Der Zentrifugierradius kann je nach Röhrchen-.gestell korrigiert-werden. Dadurch wird immer der richtige RZB-Wert errechnet, bzw. angezeigt.
Programmspeicher
Für Routineläufe stehen 10 Speicherplätze zur Verfügung. Alle Laufparameter wie Drehzahl, Temperatur u.s.w. können abgespeichert werden. Bei Bedarf kann eines der Programme auf-gerufen werden.
Danach werden alle gespeicherten Parameter inkl. des Rotortyps angezeigt und der Lauf kann gestartet werden. Routineläufe sind dadurch genau reproduzierbar.
Funktion
Altbewährte Drehköpfe machen die Bedienung der komfortablen Mikroprozessorsteuerung zum Kinder-spiel. Eingegebene Werte, wie beispielsweise Drehzahl oder Laufzeit bleiben auch nach Laufende erhalten.
Soll-Ist-Wert-Anzeige
Die große Ist-Wert-Anzeige zeigt immer die aktuelle, die kleinere Soll-Wert-Anzeige die vorgewählte Rotordrehzahl an. Beide Anzeigen können per Knopfdruck von Drehzahl auf Zentrifugalbeschleunigung umgeschaltet werden. Egal ob vor oder während des Laufes.
Grob- und Feineinstellung
Mit zwei Drehknöpfen wird die Drehzahl vorgewählt. Links die Grobeinstellung in 500 mini-1 Schritten; rechts die Feineinstellung in
10 min-1 Schritten.
Z 383 K
Die Zentrifuge Z 383 K ist eine universelle Tischkühlzentrifuge. Unabhängig vom installierten Rotor beweist die Kühlung ihre Leistungsstärke. Rotoren können bei Höchstdrehzahl unter 4 °C gekühlt werden. Zur Kühlung wird das FCKW-freie Kältemittel R 134a ein-gesetzt.
Vor einem Zentrifugallauf kann die Temperatur in der Rotorkammer auf die gewünschte Arbeitstemperatur vorgekühlt werden. Hierzu ist auf dem Bedienschild die Taste "precool" vorgesehen, mit der ein spezielles Vorkühlprogramm gestartet werden kann.
Bedienvorteile
Drehzahleingabe in 10 mini-1 und 500 min-1 Schritten
Laufzeitvorwahl zwischen 1 und 60 Minuten oder Dauerlauf
Restzeitanzeige
Automatische Rotorerkennung
Radiuskorrektur beim Einsatz von Adaptern und Röhrchengestellen möglich
Bremskraft'-in 10 Stufen vorwählbar
Temperaturbereich -10 °C bis +40 °C
Anzeige und Vorwahl der Probentemperatur
Quick-Taste für Kurzzeitläufe mit Sekundenanzeige
Fehlermeldung bei Unwuchtabschaltung w Vorkühlprogramm "precool"
Softwareintegrierte Fehlerdiagnose
Zentrifuge |
Z 383 |
Z 383 K |
|
|
|
|
|
Leistungsdaten |
|
|
|
Drehzahl max. |
17.000 min-1 |
|
|
RZB max. |
26.810 x g |
|
|
Volumen max. |
4 x 250 ml |
|
|
|
|
|
|
Abmessung |
|
|
|
Gerät (B/H/T) |
48/38/60 cm |
75/38/60 cm |
|
|
|
|
|
Gewicht |
60 kg |
120 kg |
|
|
|
|
|
Spannung |
Bestellnummer |
|
|
220 V / 50 - 60 Hz |
272.00 V05 |
270.00 V05 |
|
120 V / 50 - 60 Hz |
272.00 V06 |
270.00 V06 |
|
|
|
|
|
|
|
|
|
Rotoren |
Max. Drehzahl |
Max. RZB |
Bestellnummer |
Ausschwingrotor 4 x 250 ml |
5000 min - 1 |
4690 x g |
220.86 VO1 |
Mikrotiterrotor 2 x 3 Platten |
3500 min - 1 |
1500 x g |
220.50 V05 |
Winkelrotor 24 x 15 ml |
3500 min -1 |
2000 x g |
220.81 V05 |
Winkelrotor 6 x 85 ml |
15000 min - 1 |
25900 x g |
220.78 V02 |
Winkelrotor 8 x 50 ml |
15000 min - 1 |
23890 x g |
220.80 V02 |
Winkelrotor 8 x 30 ml |
15000 min - 1 |
23600 x g |
220.76 V02 |
Winkelrotor 12 x 12 ml |
15000 min - 1 |
24600 x g |
220.85 VO1 |
Mikroliterrotor 24 x 2,0/1,5 ml |
17000 min - 1 |
26810 x g |
220.87 VOl |
Mikroliterrotor 24 x 2,0/1,5 ml |
13500 min - 1 |
17310 x g |
220.59 V06 |
Mikroliterrotor 44 x 2,0/1,5 ml |
13500 min - 1 |
17110 x g |
220.88 V01 |
Mikroliterrotor 64 x 0,5 ml |
13500 min -1 |
16700 x g |
220.92 V01 |
Swing out rotor 4 x 15 ml |
8000 min -1 |
9510 x g |
220.73 V02 |