Heraeus-Vötsch VLK 07/90
Objektnummer | B00013842 |
---|---|
Seriennummer | 013842 |
Nome oggetto | Heraeus-Vötsch VLK 07/90 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Heraeus-Vötsch
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Leistungsbereich für Temperaturprüfungen
Temperaturbereich: -70°C bis +180°C
Leistungsbereich für Klimaprüfungen
Temperaturbereich: +10°C bis +90°C
Maße und Gewicht
Abmessungen in mm: Prüfraum Gehäuse und max. Außenabmessungen
siehe zugehörigen Aufstellungsplan
Breite a = 430
Tiefe b = 450
Höhe c = 435
Gewicht: ca. 330 kg netto
Ausführung
Prüfraum: Edelstahl, Werkstoff 1.4301
Bodenbelastung max. 100 kg/m 2
Punktlast max. 10 kg
Ausgleich von über- und Unterdruck
Luftführung: Lüfter mit außenliegendem Motor, Ansaugeng an der
Rückseite, Zuluft allseitg.
Tür: abschließbar, Anschlag rechts
Lackierung: RAL 3016 (korallenrot)
Beobachtungsfenster: 500 mm x 500 mm mit beheizter Außen- und Innenscheibe
Prüfraumbeleuchtung: Leuchtstofflampe 220 V, 8 W mit Schalter, außen am Fenster montiert.
Gehäuse: galvanisch verzinktes Stahlblech
Lackierung: RAL 7032 (kieselgrau)
Isolierung: Zweischichtisolierung mit äußerer und innerer Dampfsperre
Kältemaschine: Kaskade, luftgekühlt 1 x 0,55 / 0,37 kW
Klimasystem: SVB mit automatischer Wassernachspeisung
Steuerung: - Zweipunktesteuerung für Temperatur und Feuchte.
- Sollwerteinstellung über Potentiometer.
- Digitale Soll- und Istwertanzeige.
- Elektronische Regler einschl. Meßfühler Pt 100 DIN
43760 Klasse B für Temperaturregelung und
Taupunktsteuerung.
- Leuchtschaubild mit Funktions- und Störungsanzeige.
Sicherheit: - Einstellbarer Übertemperaturprüfgutschutz.
- Temperaturwächter TW und Temperaturbegrenzer TB.
- Störmeldung auf potentialfreien Kontakt geführt, max.
Belastung 24 V, 3 A.
Anschlüsse
Elektroanschluß: Nennspannung: 220 V ±5% 1/N 50 Hz
Nennleistung: 2,5 kW
Nennstrom: 14,5 A
Anschluß: Stecker
Absicherung: 16 A träge, bauseits
Schutzart: IP 20
Abläufe: Reinigungs- und Kondensatablauf Schlauchanschluß 1/2"
Reinigungsablauf Be-und Entfeuchtungssystem
Stromverbrauch bei +180°C ca. 0,5 kW
bei + 40°C / 95% r.F ca. 0,5 kW
bei 70°C ca. 1,2 kW
Wasserverbrauch: bei + 40°C / 95% r.F ca. 0,2 1/24 h
Anmerkung
- Der Schallpegel liegt bei ca. 63 dB(A) gemessen in einem Abstand von 2 m.
- Zulässige Umgebungstemperatur +15°C bis +35°C, max. 75% r.F.
- Die Leistungsangaben beziehen sich auf eine Umgebungstemperatur von +23°C ±2°C. Die Werte gelten, soweit nichts anderes angegeben ist, ohne Prüfgut, ohne Einstrahlung und ohne Zusatzeinrichtungen.
- Aufstellung in einem trockenen, belüfteten Raum.
Prüfraum
Prüfraumbehälter und Luftleitwände sind aus Edelstahl. Im rückseitigen Luftbehandlungsraum befinden sich:
- Ein Wärmeaustauscher aus Kupferrohren mit Aluminiumlamellen,
- ein elektrischer Heizkörper aus Edelstahl,
- ein Ventilator zur Luftumwälzung.
Die Luft wird an der Rückwand oben angesaugt und tritt unten - seitlich und vorne - wieder in den Prüfraum ein.
Der Meßfühler zur Temperaturmessung ist im Luftbehandlungsraum und der zur Taupunkttemperaturmessung im Klimasystem untergebracht.
Die psychrometrische Meßeinrichtung* befindet sich vor der Ansaugöffnung. Das Naßthermometer ist mit einem Befeuch - tungsdocht überzogen. Je nach Beanspruchung muß dieser erneuert werden.
Maschinenteil
Das Maschinenteil befindet sich unten im Gehäuse. Es ist zugänglich durch allseitig angebrachte Abdeckungen. Enthalten sind das Kältemaschinenaagrega«t mit luftgekühltem Kondensator, das Klimasystem und notwendiges Zubehör. Verwendet wird Kältemittel der Gruppe 1.
Schalt-und Elektroabteil
Das Schalt-und Elektroabteil liegt über dem Maschinenteil. Die Schaltelemente sind von vorne zu bedienen. Das Elektro7 abteil enthält notwendige Bauteile wie Sicherungen, Regler, und Relais.
Zum öffnen des Elektroabteils vier Befestigungsschrauben (1-1) entfernen. Bedienfeld herausziehen.