Back to Top
Archivio
Heraeus T 5042 E
Descrizione:
siehe Storeview
| Objektnummer | B00018826 |
|---|---|
| Seriennummer | 018826 |
| Nome oggetto | Heraeus T 5042 E |
| Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
1 Mercury thermometer
2 Models 5050 and 5060:
Control knob for alr vent flap
(mode) 5042: air vent with slide, in the top)
3 Adjustable temperature Ihre cut-out 3a Red waming lamp,
indicating excess temperature
3b Reset button
4 Temperature controller
4a Locking device
4b Temperature control knob
4c White pilot lamp, indicating controller in operation
4d Socket for connection of temperature programmer or recorder
(model NR controller only)')
5 Green pilot lamp, indicatinoven in operation
6 Mains switch
7 Time switch
8 Push-button for time switch
9 Push-button without function
10 Push-button without function
11 Push-button for intemal lighting
---- Special attachment
*)When the oven is used without a programmer (recorder), the short-circuit plug must be inserted in the socket.
The ovens may be equipped with any one of the following temperature controllers:
Model ER eclectronic controller
With PD action
Model NR electronic controller
With PD/PID action
Mechanical controller
Both types of electronic controllers work in conjunction with separate platinum resistance thermometers Pt 100 as temperature sensors. The mechanical controller works in conjunction with an integrated temperature sensor.
|
Type
|
Temperature range
°C |
Connected load I
kW |
Holding power
kW |
Rated voltage
V.A.C.
|
Time required for empty oven to heat to 150°C rated temp. (-2%) (-2%) min. min. |
|
|
Ovens with electronic controller |
||||||
|
T 5042 E T 5042 EK T 5050 E T 5050 EK T 5060 E T 5060 EK UT 5042 E UT5042 EK UT5050 E UT5050 EK UT 5060 E *) UT5060 EK *) |
tA -250 tA -300 tA -250 tA -300 tA -250 tA -300 t AU -250 t AU -300 t AU -250 t AU -300 t AU -250 t AU -300 |
0,8 1,15 2,0 2,0 2,15 2,7 1,6 1,6 2,0 2,0 3,2 3,2 |
0,43 0,47 0,68 0,8 0,78 1,0 0,5 0,64 0,7 0,97 1,0 1,1 |
220 220 220 220 220 220 220 220 220 220 220 220 |
35 45 32 35 40 45 20 20 22 25 15 22 |
65 75 50 70 80 85 35 40 30 45 30 55 |
|
Ovens with mechanical controller |
||||||
|
T/ST 5042 T 5042 K T/ST 5050 T/ST 5060 UT 5042 |
40-250 40-250 40-250 40-250 t AU -250 |
0,8 1,15 2,0 2,15 1,6 |
0,43 0,43 0,68 0,78 0,5 |
220 220 220 220 220 |
52 90 36 85 32 |
75 115 65 110 50 |
|
*) Additionally equipped with asuction fan for fresh air, which is started and stopped by push-button (9). When this fan is started, the corresponding white pilot lamp lights up. |
||||||
Description
The ovens correspond to DIN-Standard 12880 Part 1, and have been type-tested according to DIN-Standard 12880 Part 2.
Protection:
Protection dass 1
Circuit connection:
Permanently installed power supply cable with earthing-contact type plug
Rated voltage, connected load and rated current:
See 1.1. and rating plate.
Rated frequency:
50/60 c/s
Protection against overheating, according to DIN-Standard 12880
Class 2 (adjustable temperature limit cut-out)
Working space:
That part of the internal space which has a distance from any of the inner walls corresponding to one-tenth of the respective internal dimension (see also DIN-Standard 12880 Part 2).
The spatial temperature differences are approx. ± 2 % of the rated temperature.
At lower temperatures, the absolute value of the spatial temperature differences is smaller.
In the case of ovens with a window in the door, the spatial temperature differences may be greater.
UT Ovens
With UT ovens for temperatures up to 250 °C, the spatial temperature differences are approx. ± 3.6 °C; with ovens up to 300 °C approx. ± 4.5 °C. The temperature fluctuations with time is ≦ 0.8 °C. (When an OptoelectronicThyristor Power Unit LE-16 is used in conjunction with a modified controller, DIN-Standard 50011 Part 1 is met).
These ovens have no gap in the door gasket for the air to enter.
With model 5042, air is continually drawn in by the fan when the vent hole is open, passing over the heating system into the internal space.
Model 5050 has two sockets in the rear wall, through which air is drawn in and hot air expelled when the oven is operating with fresh air.
Gruppo prodotti: Armadi di Essicazione
Domande?
Il tuo Labexchange-Team sarà lieto di aiutarvi:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
