Heidolph Diax900, 25DG
| Objektnummer | B00013848 |
|---|---|
| Seriennummer | 013848 |
| Nome oggetto | Heidolph Diax900, 25DG |
| Stato | Archived Product |
Gruppo prodotti: Omogenizzatori
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Heidolph
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Der Dispergierer DIAX 900 ist für den Laboreinsatz im Bereich Mischen mit hoher Drehzahl konstruiert. Das Gerät ist aufgrund seines Aufbaus für den Stativbetrieb geeignet.
Für die Bearbeitung unterschiedlichster Medien ist das Gerät mit einem elektronischen Drehzahlregler ausgerüstet.
Der Dispergierer kann über einen Flansch mit verschiedenen Dispergierwerkzeugen ausgerüstet werden.
Das Gerät erfordert eine sichere Befestigung, z.B. an einem originalen HEIDOLPH-Stativ. Freie Zugänglichkeit zu dem Gerät ist aus Sicherheitsgründen erforderlich. Zur Gewährung der Sicherheit des Betreibers muss das Stativ auf einer glatten, horizontalen Fläche aufgestellt werden.
DISPERGIERER 900
Anschlußspannung 230V/.50/60 Hz 115 V 50/60 Hz 100 V 50/60 Hz
Aufnahmeleistung 900 Watt
Abgabeleistung 495 Watt
Drehzahlbereich 8.000 - 26.000 1/min, stufenlos regelbar
Drehzahleinstellung Stellrad mit 6 Merkzahlen
Betriebsart nach VDE 0530 S1 (Dauerbetrieb)
Schutzklasse nach VDE 0100 II (schutzisoliert)
CE-Konformität EMV-Gesetz
Niederspannungs-Gesetz
DISPERGIERWERKZEUG 6G
Generatordurchmesser 6,0 mm
max. Eintauchtiefe 45 mm
Statorschlitzbreite 0,5 mm
Lagerung 1 x Edelstahlkugellager
1 x Tauchlager aus PTFE
maximal zulässige Drehzahl 31.800 1/min
Arbeitsbereich 0,2 - 50 ml
Material Rost- und säurebeständiger Edelstahl
DISPERGIERWERKZEUG 10G, 10F
Schaftdurchmesser 10,0 mm
max. Eintauchtiefe 150 mm
Statorschlitzbreite 2,0/0,5 mm
Lagerung 1 x Edelstahlkugellager
1 x Tauchlager aus PTFE
maximal zulässige Drehzahl 25.000 1/min
Arbeitsbereich 30 - 100 mI
Material Rost- und säurebeständiger Edelstahl
DISPERGIERWERKZEUG 20DG, 2ODF
Schaftdurchmesser 20,0 mm
max. Eintauchtiefe 215 mm
Statorschlitzbreite 3,0 / 1,6 mm
Lagerung 2 x Edelstahlkugellager
Dichtung 1x Gleitringdichtung Keramik / Kohle
oder Keramik / Keramik (optional)
maximal zulässige Drehzahl 25.000 1/min
Arbeitsbereich 250 - 2500 ml
Material Rost- und säurebeständiger Edelstahl
DISPERGIERWERKZEUGE 18G, 18F UND 25G, 25F
Schaftdurchmesser 18,0 mm / 25,0 mm
max. Eintauchtiefe 200 mm
Statorschlitzbreite G / F 3,01 1,6 mm
Lagerung 1 x Tauchlager aus PTFE
maximal zulässige Drehzahl 25.000 1/min
Arbeitsbereich 18G/F: 100 - 1.500 ml
25G/F: 500 - 5.000 ml
Material Rost- und säurebeständiger Edelstahl
DISPERGIERWERKZEUGE 25DG, 25DF UND 30DG, 3ODF
Schaftdurchmesser 25,0 mm / 30,0 mm
max. Eintauchtiefe 200 / 195 mm
Statorschlitzbreite DG / DF 3,0 / 1,6 mm
Lagerung 2 x Edelstahlkugellager
Dichtung 1 x Gleitringdichtung
Keramik / Kohle (25DG/DF)
Keramik / Keramik (30DGIDF)
maximal zulässige Drehzahl 25000 1/min
Arbeitsbereich 25DG/DF: 500 - 5000 ml
30DG/DF: 750 - 7500 mI
Material Rost- und säurebeständiger Edelstahl
Il tuo Labexchange-Team sarà lieto di aiutarvi:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
