Maggiori Informazioni
Objektnummer	B00011248
Seriennummer	011248
Nome oggetto	Gynkotek RF 1002
Stato	Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma: Gynkotek

Modell: RF 1002

Kommentar: Dokumente deut.

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

Technische Daten

Lichtquelle: 150 W Xenon-Lampe

Lichtquellengehäuse: Gehäuse vom Typ Selbstozonisation

Art der Monochromatoren: Anregungs- und Emissions-Monochromatoren F/2.4, mit ion blazed holgraphisch, konkaven Beugungsgittern

Anzahl der Beugungs-

gittergitterstriche: 900/mm

Umfang der Wellen-

längen-Skala: 200-900 nm und nullter Ordnung

Umfang der Messungs-

Wellenlänge: 220-750 nm und nullter Ordnung

Bandbreite: 15 nm

Wellenlängengenauigkeit: ±5 nm

Wellenlängenscan-

geschwindigkeit: SUPER, FAST, MEDIUM und SLOW sind wählbar.

SUPER: ca.3000 nm/min.

FAST: ca. 600nm/min.

MEDIUM: ca. 120nm/min.

SLOW: ca. 24nm/min.

Wellenlängenbewe-

gungsgeschwindigkeit: ca. 18000 nm/min

Detektor: Photomultiplier (sowohl auf der Monitor als auch auf der Signal Seite)

Meßmethode: monochromatisches Licht überwacht durch Dynoden Rückkopplung

Zeitkonstante: 0.1, 0.5. 1.5 und 5 sec. wählbar

Empfindlichkeit: HIGH und LOW wählbar (HIGH erzeugt eine ca, 30 mal höhere Empfindlichkeit als LOW)

Verstärkung: x 1, x 4 und x 16 wählbar

Vergrößerung: 10 Abstufungen desEmpfindlichkeitsfaktors x1, x2, x4, x8, x16, x32, x64, x128, x256 und x... wählbar .

Ausgangsanschlüsse: Aufzeichnungsgerät 1mV, l0mV

Integrator 1V F.S.

Contact signal output (EVENT OUT Ausgang)

Einganganschlüsse: contact signal input (PROG RUN Eingang, EVENT IN Eingang)

Zelle: 12 µl quadratratische Quarz Strömungszelle (maximaler Innendruck: 5 bar)

Kommunikations-

möglichkeiten: RS-232C Schnittstelle

Anzeige: Flüßigkristallanzeige mit Hintergrundbeleuchtung

Meßmöglichkeiten: Monitor-Funktion:

Auto-zero Funktion, Niveau-Feinjustierungsfunktion

Time-program Funktion:

ein Programm aus maximal 10 Schritten bestehend ist verfügbar *Spectrummeß-Funktion:

Vergrößerung /Verkleinerung des Cursor/Spectrum, Peak Detektion, Differenzial-Spektrum

Speicherkapazität: Meßbedingungen:

2 Sätze Parameter können gespeichert werden.

Zeitprogramm:

2 Programme können gespeichert werden.

Spektrum:

5 Spektralanalysen können gespeichert werden (wird das Gerät ausgeschaltet, wird das gespeicherte Spektrum gelöscht).

äußere Abmessungen: 260 Breite x 480 Tiefe x 200 Höhe in mm

Gewicht: 18 kg

Stromversorgung: Wechselstrom 100 V,117 V, 220 V, 240 V

Stromverbrauch: 400 Watt

Temperatur im Meßraum: 15 bis 35 °C

Umgebungsluftfeuchte: 45 bis 80% (Beträgt die Temperatur 30°C oder mehr sollte die relative Luftfeuchte maximal 70 % nicht überschreiten!)

S/N-Quotient: 150 oder mehr bei dem Spitzenwert der Raman-Streuung von destilliertem Wasser mit EX = 350 nm und der Zeitkonstanten = 1.5 Sek.

Gruppo prodotti: HPLC-Detectors

Non è stato trovato alcun prodotto corrispondente alla selezione.