Gilson Gelpermeation
| Objektnummer | B00012332 |
|---|---|
| Seriennummer | 012332 |
| Nome oggetto | Gilson Gelpermeation |
| Stato | Archived Product |
Gruppo prodotti: HPLC Sistemi
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Gilson
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
Pump 307
Description
Figure 1 Shows a front view of the 307 pump witha pump head mounted. There is a keypad which consists of a display, a nurneric keypad and soff keys for programming the 307. The pump head is mounted an the right hand side.
Figure 1: front view
1 - Digital display
2 - Numeric keypad
3 - Pump head
4 - Pump head clarnp
5 - Pump head inlet
6 - Pump head outlet
7 - Manometric module connections
8 - Side grip
9 - Side screws
Specifications
TYPE:
Programmable reciprocating pump, with single piston interchangeable head, constant strake and fast refill motion, internal pulse dampener, and pressure feedback.
WORKING RANGE
Flow rate: 0.025 - 5 mL/min.
Pressure: 0.1 - 60 MPa.
Temperature: 0 - 40°C for the module.
PUMP HEADS:
Any Gilson model working in the above range, specifically the 5SC for standard applications and the 10 WSC for salt-concentrated solutions (> 0.1M).
LIQUID CONTACT MATERIALS:
316L stainless steel, sapphire, ruby, PCTFE, PTFE;/HDPE.
PULSE DAMPENING
Pulsation: less than 1% with water at 1 mL/min and pressure higher than 8 MPa.
Dampener volume: 0.6 mL at atmospheric pressure, and 1.6 mL at 60 MPa.
FLOW RATE PRECISION AND ACCURACY AT 20°C OVER FULL WORKING RANGE
Coefficient of variation: 0.1 - 0.6% with aqueous solutions or hydro-organic polar solvent mixtures, and 0.3 -1% with hydrocarbons or chlorinated volatile solvents.
Maximum accuracy error ± 1% with water over the full flow rate and pressure ranges.
OPERATING MODES:
Constant flow rate (Flow), constant volume (Dispense), and time-based sequence (Program).
PROGRAM MODE AND SYSTEM CONTROL
Time: adjustable from 10 -2 to 10 4 min, with increment from 0.01 to 1 min depending on the range used.
Program points: up to 25, induding flow rate and external events.
Flow rate: adjustable in mL/min, from 0.01% to 100% of the head maximum flow rate.
External events: 4 outputs contact closures to activate auto-sampler, integrator, fraction collector and detector autozero, and 1 input to wait for injection.
Up to 999 program loops and program Iinking.
Safety functions: 4 dedicated programs, for pressure outside of selected limits, input of an emergency signal (temperature threshold, leak detection, etc), and power failure.
MEMORY CAPACITY:
10 user's programs and 4 safety programs.
DISPENSE MODE:
Volume adjustable in mL from 10 -4 to 10 2 times the pump head size. For a 5mL head, from 0.5 µL to 500 mL. Dispense time or flow rate can be selected.
PUMP PARAMETERS:
Head number (5 or 10), liquid compressibility (0 to 999 Mbar -1 ), and refill time (125 to 1000 ms).
USER INTERFACE: 2 x 24 character LCD display. Front panel keypad. Built-in help messages. Information display for use and maintenance.
DIGITAL INTERFACE:
Gilson Serial Input Output Channel (GSIOC) slave connector on rear panel.
ELECTRICAL INTERFACE:
4 inputs and 4 relay outputs on rear panel.
SIZE:WxHxD:
33x15x33cm/13x6x13inches.
Dilutor 401C
The 401C Dilutor is a low pressure pump having a wide range of applications. lt is designed primarily to workas a slave to Gilson samplers, sampling injectors, and analytical systems (221, 222, 231, 232, 233, ASPEC and ASTED).
Volume range: 2 to 10000 gL with four different syringe sizes.
Dilute ratio: Maximum dilution ratio -1 /250
Maximum pressure: 0.5 mL, 1 mL and 5 mL syringes - 0.8 MPa.
10 mL syringe - 0.4 MPa.
Minimum piston travel time: 1.5 seconds for one complete stroke.
Piston drive: Stepper motor.
Valve drive: Synchronous motor.
Chemical compatibility: All liquids compatible with PTFE, FEP, PC 11.E, glass and ceramic.
Voltage input Nominal voltage +/-10%.
Operating temperature: 2 to 40°C.
Storage temperature: -20 to +70°C.
Dimension (W x D x H): 20 x 13 x 26 cm.
Weight: 4.8 kg.
Flow rate range:
|
Syringe capacity (mL) |
Flow rate range (mUmin) |
|
0.5 |
0.18 - 20 |
|
1 |
0.18 - 40 |
|
5 |
0.18 - 96 |
|
10 |
0.18 - 96 |
Volume Accuracy and precision:
|
% Capacity |
Accuracy +/-A% |
Precision <=CV% |
|
100 |
0.8 |
0.15 |
|
50 |
0.8 |
0.25 |
|
10 |
1.0 |
0.50 |
