Gilson ASPEC GX-274
Objektnummer | B00020375 |
---|---|
Seriennummer | 020375 |
Nome oggetto | Gilson ASPEC GX-274 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
model : ASPEC GX-274
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Maximize efficiency and throughput with the unattended, parallel solid phase extraction processing of samples via Gilsons GX-274 ASPEC TM . Its as easy as placing your samples on the instrument, inserting SPE cartridges in the mobile racks, and filling solvent reservoirs. Then, create your sample list with the powerful TRILUTION® LH software and press start its that easy. The GX-274 ASPEC is a higher throughput four-probe instrument capable of processing up to 4 samples in parallel to increase both throughput and the efficiency of your cartridge-based applications. Based on positive pressure elution, this instrument processes up to four samples in a single step with an innovative and proven sealing cap technology, where each cartridge is sealed, run, and monitored individually. The two 406 Dual Syringe Pumps allow the user to transfer liquids, process up to four samples in parallel, and to monitor pressure on each fluid path individually.
- Four probe Z-arm increases throughput and efficiency.
- Positive pressure elution ensures better reproducibility and higher precision.
- The 406 Dual Syringe Pumps are equipped with independent pressure sensing modules that monitor pressure on each of the four fluid paths and can be used to handle error conditions such as high cartridge pressure or clogged liquid lines.
- Accomodates 1, 3 and 6 mL SPE cartridges.
- On-bed reservoirs allow access up to four solvents without taking up a position on the tray.
- Transfer ports allow access to 2 additional off-bed, large volume solvent reservoirs without taking up any on bed rack position. Extend this capability through the use of VALVEMATE® II.
- Modular design allows the use of Code 200, Code 34x , or Code 37x series racks.
- Mobile Rack Technology enables use as an SPE instrument as well as Liquid Handling instrument.
- Positive pressure elution achieved via Gilsons sealing cap technology.
- Eluted product can be fractioned by moving to different collection tubes.
- SPE process can be performed in either batch or sequential mode to optimize throughput and efficiency.
Specifications GX-274 ASPEC TM
Liquid Handling
Accuracy: >98% (100µL 25mL)
Cartridge capacity: 108 ( mL ), 60 (3 mL ), 45 (6 mL )
Sampler Type
X/Y/Z with stationary rack design
Probe Positioning Performance
Accuracy: ±0.75 mm in X/Y/Z dimensions
Repeatability: ±0.20 mm in X/Y/Z dimensions
Arm Speed
350 mm/sec in X dimension
350 mm/sec in Y dimension
125 mm/sec in Z dimension (factory-set at 80 mm/sec)
Vertical Punch Strength
1.4 kg (3.0 lb) per probe
Horizontal Motion Strength
X: 2.0 kg (4.5 lb)
Y: 2.0 kg (4.5 lb)
Probe Rinse
Probe rinsing and flowing probe rinsing occurs through a dedicated rinse station using up to two flowing outside rinse solvents when integrated with a GX rinse pump
Rack Capacity
Up to five Code 20 or 33X/34X Series Racks or five Code 37X Series DEC Racks
Front Panel
Two 7-segment blue LED displays and LED indicator lights for power and error messages
Syringe Pump
Two 406 Dual Syringe Pumps
Contact Control
Two inputs (contact closure control & TTL), two relay outputs, two switched +24V DC 1A outputs and one safety input control
Note: Do not use voltages higher than 30V despite contacts rated for higher voltage
Software Control
Computer control via Ethernet communication and TRILUTION® LH Software
Environmental Conditions
For indoor use only
Altitude: 2000 m
Temperature: 5°C 40°C
Air pressure: 75 105 kPa
Pollution degree: 1 or 2, in accordance with IEC 66
Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C
Manufacturing Standards
Meets applicable safety and EMC certification standards; UL and CE certified
Fuse
5 x 20 mm T type 2.50A
One for 100 120V, two for 220 240V
Power Requirement
Frequency: 50 60 Hz
Voltage: 100 240V (universal input)
Current rating: 2.0A for 100 120V or 1.0A for 220 240V
Power consumption: 250W maximum
Dimensions (w x d x h)
59.7 x 54.1 x 57.1 cm (23.5 x 21.3 x 22.5 in)
Note : This does not include the two 406 Dual Syringe Pumps
Weight
22 kg (48 lb)