GFL 1003
| Objektnummer | B00009798 |
|---|---|
| Seriennummer | 009798 |
| Nome oggetto | GFL 1003 |
| Stato | Archived Product |
Gruppo prodotti: Bagnimaria
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: GFL
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
S1 = Hauptschalter
S2 = Temperaturregler
F1 = Temperaturwählbegrenzer
E1 = Rohrheizkörper
R1 = Vorwiderstand
(nur bei Typ 1012 / 1013)
H1 = Kontrollampe Hauptschalter EIN
H2 = Kontrollampe Temperaturregler EIN
H3 = Kontrollampe Temperaturwählbegrenzer
M1 = Antriebsmotor
(nur bei Typ 1012 / 1013)
|
Innenmaß Breite mm |
400 |
|
Tiefe mm |
245 |
|
Nutzhöhe mm |
145 |
|
Außenmaß Breite mm |
482 |
|
Tiefe mm |
367 |
|
Höhe mm |
250 |
|
Inhalt ca. Liter |
14 |
|
Anschluß Watt |
1500 |
|
Gewicht ca. netto kg |
12 |
|
brutto kg |
21 |
|
Verp.-maß ca. m 3 |
0,24 |
- Für Inkubationen und Inaktivierungen von Kulturen- mit Mikroprozessor-gesteuerter Temperaturregelung
- Proportional-integrales Regelverhalten (PI)
- Kurze Aufheizzeiten
- Ein Überschwingen der vorgegebenen Sollwerttemperatur ist auf ein Minimum
- reduziert
- Digitale Temperatureinstellung und Temperaturanzeige in Schritten von 0,1°C
- Schnelle und genaue Reproduzierbarkeit des vorgegebenen Sollwerts
- Folientastatur mit prägnanten Symbolen
- Zwei-Finger-Bedienung schützt vor unbeasichtigten Veränderungen des eingestellten Sollwerts
- Sollwertabhängige mitlaufende Übertemperatursicherung - elektronisch - zum Schutz des Prüfgutes
- Wassermangelsicherung zum Schutz des Rohrheizkörpers
- Elektronische Funktionsüberwachung: im Störfall Anzeige der Fehlerursache am Display
- Temperaturbereich von ca.5°C über Raumtemperatur bis 99.9°C bei Einbau eines Niveaureglers (Zusatzeinrichtung) von ca. 3°C über Leitungswassertemperatur bis 99.9°C
- Temperaturkonstanz (zeitlich) ca. +/- 0,1 K
- Entleerungshahn an der Rückseite
- Rohrheizkörper - Badkörper - Abdeckrahmen-Deckel und alle mit Wasser in Berührung kommenden Teile aus Edelstahl Rostfrei - Werkstoff-Nr. 1.4876 und 1.4301
- Aufklappbarer wärmeisolierender Deckel mit innerer Wölbung - kein Verwinden kein Zurücktropfen, Kondensat in die Gläser
- Außengehäuse aus elektrolytisch verzinktem Stahlblech pulverbeschichtet - grauweiß(RAL 90C
- Bedientafel weinrot (RAL3005)
- Das Gerät ist GS-geprüft funkentstört und entspricht der Medizingeräte-Verordnung für den Einsatz in medizinischen Laboratorien
