GeSim Nano-Plotter 2.0
Objektnummer | B00022465 |
---|---|
Seriennummer | 022465 |
Nome oggetto | GeSim Nano-Plotter 2.0 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: GeSim
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Nano-Plotter 2.0
Technische Daten
Antrieb Positioniersystem XYZ Schrittmotoren, Riemenantriebe für XY-Bewegungen, Seilantrieb für Z-Bewegungen
Dosierarbeitsfläche Breite 290 mm, Tiefe 340 mm, Aluminium
Max. Pipettierhöhe ca. 50 mm
Verfahrbereich in x/y-Richtung Breite 425 mm, Tiefe 340 mm
max. Geschwindigkeit 500 mm/s bei Xy-Bewergungen
80 mm/s bei Z-Bewegungen, einstellbar
Pipettierkanäle 1 bis 16, piezoelektrisches Dosierprinzip (Drop an demand )
Wasch- und Trockenstation Separate Spülung für jede Pipette zur Vermeidung von Substanzverschleppungen
Dilutor 2501J1-Spritze (optional sind wählbar 50, 100, 500 1000 2500 und 5000 pl ), Auflösung 3000 Schritte, Variationskoeffizient der Genauigkeit: 0,05 % innerhalb Lauf bei vollem Hub,
Variationskoeffizient der Präzision < 1 % bei vollem Hub, ein Motorschritt entspricht bei der 250µL-Spritze etwa 83nL
Mikropipetten Kammervolumen 0,65 µL bei Pico-Tips , 1,2 µL bei Nano-Tips Nano-Tip Tropfenvolumen Nano Tip ca. 0,3 nl - 0,5 nl, flüssigkeits- und parameterabhängig
Pico-Tip : ca. 0,1 nl, flüssigkeits-und parameterabhängig
Spannung 40 bis 150 V
Software Alle Funktionen werden über die grafisch orientierte PC-Software gesteuert. Hardwareorientierte Programmierung erlaubt Zugriff auf Mikropipetten, Robotik, Dilutor , Wasch-und Trockenstation, Stroboskop und Tropfensensor über zugeordnete Funktionsmenüs. Pipettierskripte ( Pipettierprogramme in ASCII-Code) für komplexe Anwendungen lassen sich durch Kombination der Hardware-Befehle leicht erzeugen.
Zubehör: Stroboskopsystem
Tropfensensor
Barcode-Lesesystem für Mikroplatten
Automatische Bilderkennung zur Tropfendetektion und (mit Kamera) zur Target-Erkennung
Aufstellvoraussetzungen
Abmessungen/Gewicht (inkl. Haube): Standfläche 623 x 521 x 367 mm (B x T x H)
29 kg (ohne Diluter und Computer)
Lichte Höhe über Tisch min. 900 mm erforderlich
Stromversorgung 110 V...240 V, Leistungsaufnahme max. 180 W
Hardwarevoraussetzungen PC mit Windows 951981NT12000/XP, Maus, 1 serielle Schnittstelle (R5232)
Pipettierleistungen
Single Spot-Pipettierung max. 3000 spots/cm³
Dosierung einer Probe max. 5.000 spots/cm 2
Dosierarbeitsfläche bis zu ca. 60 Slides 25 x 75 mm, alternativ sechs Mikrotiterplatten
Probenbereitstellung 96-Well- oder 384-Well-Mikroplatten
Probenvolumen pro Well min. 5 µl
Probenaufnahme je Well min. 0 ,5 µl
Luftbefeuchtungssystem
Technische Daten
Stromversorgung 230 V / 50 Hz
Leistungsaufnahme 105 W
Sicherung T 2,5 A
Ultraschall-Frequenz 1,7 MHz
Aufstellvoraussetzungen
Abmessungen ( HxTxB ) 180 x 253 x 275 mm
Gewicht mit Zubehör 8 kg
Sensor
Messbereich 0...100 % rH
Messgenauigkeit 3,5 % rH
Wasserverbrauch
Reinstwasser-Qualität < 20 uS/cm
Zul. Umgebungstemperatur 0...50 °C
Wasserverbrauch Spülen ca. 500 ml
Wasserverbrauch Füllen ca. 500 ml
Wasserverbrauch im Betrieb max. 50 ml/h
HUBER Bad- und Umwälzthermostat Ministat 125
Mit luftgekühlter Kältemaschine. Eine leistungsstarke, drehzahlgeregelte Druck- und Saugpumpe ermöglicht den universellen Einsatz.
Einfache Bedienung mit Drehgeber und Digitalanzeige. Alarme und Warnungen werden visuell und akustisch unterstützt. Alle Regler (-1, -2, -3) sind rückwärts kompatibel, über Kreuz tauschbar und kalibrierfähig
Neue Funktionen: Komfortablere Bedienerführung durch grafische 4-zeitige LCD-Anzeige und leistungsfähigen Prozessor. AdministratorLevel und mehrere User-Level verfügbar. Diese ermöglichen sehr übersichtliche Bedienerführung und Schutz vor unberechtigtem Zugriff auf Parametrierung des Ministats .
ministat 125-1 ist für einfachere Temperieraufgaben konzipiert, Preisbewusst und funktionell auf das wesentliche beschränkt. ministat 125-2; wie ministat 125-1: Jedoch mit Externfühleranschluss, Externregelung und Temperaturprogrammgeber (1 Programm mit max. 5 Segmenten). ministat 125-3: wie ministat 125-2: Jedoch mit komplettem Funktionsumfang: Programmgeber (50 Segmente aufteilbar auf 10 Programme), dialogfähig, verfügt über digitale Schnittstellen RS232, RS485 und analog für bidirektionale Kommunikation, sowie über potenzialfreien Meldekontakt. Lässt sich gut in Automatisierungssysteme einbinden. Geeignet für Anschluss der Huber Fernbedienung.
Technische Daten ministat 125-1 125-2
Arbeitstemperaturbereich -25...150°C
Temperaturkonstanz bei -10°C 0,02 K (DIN 58966)
Temperatureinstellung digital
Temperaturanzeige digital
Temperaturfühler Pt 100
Anschluss externer Fühler Pt100
Analoges Interface In/Out 4-20 mA alternativ 1-5V
Heizleistung 1 ,0 kW
Förderleistung der Druckpumpe max. max.18 L/min
Förderhöhe (Druck) max. 0,6 bar
Förderleistung der Saugpumpe max. max.12 l/min
Förderhöhe (Saug) max. 0,3 bar
Pumpenanschluss M16x1
Pumpenanschluss für Schlauch NW/3/ NW12
max. zulässige kin . Viskosität 50 mm 2 /s
Badvolumen 2 ,75 I
Badvolumen mit Verdränger Einsatz 1,3 I
Badöffnung BxT 178 x 80 mm
Badtiefe 120 mm
Abmessungen B x T x H 225 x 370 x 360 mm
Netzanschluss 230 V 1 - 50 Hz
max. Stromaufnahme 7,7 A
max./min. Umgebungstemperatur 32°C / 5°C
Gewicht 23kg