Dr. Müller GL Easy
Objektnummer | B00018049 |
---|---|
Seriennummer | 018049 |
Nome oggetto | Dr. Müller GL Easy |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Dr. Müller
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Der SUPER GL easy / SUPER GL easy+ erschliesst der Baureihe SUPER GL einen weiteren Anwendungsbereich. Das Gerät ist für Anwendungen von circa 1000 Analysen pro Jahr konzipiert. Damit steht für diesen Bereich ein Gerät zur Verfügung, das in allen wesentlichen Teilen den in den meisten deutschen Labors eingesetzten Glukoseanalysern mit enzymatisch-amperometrischem Messprinzip entspricht. Damit sind die von diesem Gerät gelieferten Messwerte direkt vergleichbar mit denen des Labors. Durch ein ebenfalls im SUPER GL easy+ integriertes Fotometer ist es möglich, drei mögliche Parameter - Glukose, Laktat und Hämoglobin simultan aus einer Probe zu messen. Das bedeutet für den Anwender mehrere Parameter mit weniger Aufwand. Der langlebige Biosensor gestattet eine zuverlässige Qualitätskontrolle nach RiLiBÄK. Besonders hervorzuheben ist die vollständige Kapselung des Flüssigkeitstraktes, die den Hygienestandard weiter erhöht und das Infektionsrisiko senkt. Der SUPER GL easy / SUPER GL easy+ ist ausschliesslich für den Einzelprobenbetrieb ausgelegt, hat aber ebenfalls alle Optionen der Baureihe bis hin zum möglichen Anschluss eines Barcodelesers. Das Gerät eignet sich auf Grund der Grösse, des Gewichtes und des geringen Energieverbrauches auch gut für den mobilen Einsatz, da es auch möglich ist, den SUPER GL easy / SUPER GL easy+ mit einem Akku auszustatten. |
|
|
Technische Daten
Messdauer pro Probe |
||
Einzelmessung Glukose / Laktat |
|
circa 40 Sekunden |
Einzelmessung Hämoglobin |
|
circa 75 Sekunden |
Messung Glukose bzw. Laktat und Hämoglobin |
|
circa 75 Sekunden |
Messung Glukose und Laktat und Hämoglobin |
|
circa 75 Sekunden |
|
||
Messbereich |
||
Glukose |
|
0,8 mmol/l bis 50 mmol/l bzw. 11 mg/dl bis 910 mg/dl |
Laktat |
|
0,5 mmol/l bis 30 mmol/l bzw. 4,5 mg/dl bis 270 mg/dl |
Hämoglobin |
|
1,86 mmol/l bis 15,52 mmol/l bzw. 3 g/dl bis 25 g/dl |
|
||
Probenmenge |
||
Verdünnungsverhältnis Probe und Lösung: 1+50 |
|
10 µl / 20 µl Probe verdünnt mit |
|
|
500 µl / 1000 µl Hämolysierlösung |
|
||
Präzision (24 Proben) - Angabe des Variationskoeffizienten |
||
Glukose (12 mmol/l bzw. 216 mg/dl) |
|
< 2,0 % |
Laktat (10 mmol/l bzw. 90 mg/dl) |
|
< 2,5 % |
Hämoglobin (7,6 mmol/l bzw. 12 g/dl) |
|
< 2,0 % |
|
||
Sensoren |
||
Lagertemperatur der Sensoren |
|
+ 5 ° C bis + 8 ° C |
Lagerzeit der Sensoren |
|
12 Monate ab Herstellungsdatum |
Betriebsdauer des Glukosesensors |
|
maximal 6 Monate |
Betriebsdauer des Laktatsensors |
|
maximal 3 Monate |
|
||
Schnittstellen |
||
Drucker |
|
V 24, RS 232 |
EDV |
|
V 24, RS 232 |
|
||
Zusätzliche Angaben zum Gerät |
||
Arbeitstemperatur |
|
+ 15 °C bis + 35 ° C |
Lagertemperatur ohne Sensor |
|
- 10 ° C bis + 50 ° C |
Betriebsspannung |
|
12 V DC |
Leistungsaufnahme |
|
maximal 10 Watt |
Einordnung nach MPG |
|
In-vitro-Diagnosticum (Richtlinie 98/79/EG) |
|
||
Abmessungen / Gewicht |
||
Breite |
|
200 mm |
Höhe |
|
150 mm |
Tiefe |
|
170 mm |
Gewicht |
|
circa 2 kg |