Dani 3950
Objektnummer | B00012804 |
---|---|
Seriennummer | 012804 |
Nome oggetto | Dani 3950 |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Kommentar: Dokumente deut./engl.
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
DANI HERD SPACE SAMPLER
DANI HSS 39.50, der Headspace Probengeber mit Ventildosierung, der sowohl für gepackte Säulen als auch für Kapillarsäulen eingesetzt werden kann. Durch den Probentransfer über eine flexible geheizte Leitung paßt er auf jeden Gas - Chromatographen. Er kann in der Originalversion mit einem einfachen Trick auf Rückspülung erweitert werden.
Headspace Technik
Eine spezielle Art der Probennahme einer Dampfphase, die sich mit einer kondensierten flüssigen oder festen Phase in einem abgeschlossenen System Im thermodynamischen Gleichgewicht befindet.
Die Probe wird hierfür in Glasfläschen mit 10 ml oder 20 ml Inhalt abgefüllt, diese mit einer Gummimembran verschlossen und thermostatisiert. Nach Einstellung des Dampfdruckgleichgewichtes wird ein Teil der Gasphase mit einem Gasprobenventil in den Gas - Chromatographen dosiert. Nach dem Verschluß der Probenflaschen und deren Einsetzen in den Sampler werden alle weiteren Schritte automatisch vom HSS Probengeber übernommen. Da eine reine Gasanalyse erfolgt, können auch schwierige Proben wie z.B. Dispersionen ohne Verschmutzung des Gas - Chromatographen dosiert werden.
Die Peakgrößen sind jedoch matrixabhängig. Es muß deshalb entweder nach der Zumischmethode oder (programmierbar mit dem Sampier) nach der Multiplen - Headspace - Extraktion geeicht werden.
HS Sampler
Der Sampler kann an jeden Gas - Chromatographen angeschlossen werden, wobei die Verbindung cum Injektor über eine beheizte flexible Transferleitung erfolgt.
Er besteht aus zwei Baugruppen: Probengeber und Kontrollmodul.
Diese beiden Baugruppen sind mit einem Spezialkabel verbunden und können je nach verfügbarem Platz nebeneinander und mit einem zusätzlichen Gestell auch übereinander angeordnet werden.
Die Dosierung über ein 6- port - Ventil garantiert nicht nur hohe Reproduzierbarkeit, sondern das gesamte Leitungssystem ist so optimiert, daß auch bei Kapillartrennsäulen maximale Auflösung erreicht wird, wie im nachstehenden Chromatogramm im Jergleich zu einer gasdichten Spritze gezeigt.
Probengeber
Maximal 24 Probenflaschen können in den Drehteller eingesetzt und thermostatisiert werden. Entsprechend dem eingegebenen Programm werden die Pro- ben abgearbeitet, wobei mit einem Hilfsgas, welches vollkommen unabhängig vom Trägergas ist, ein aliquoter Teil der Dampfphase in ein Gasdosierventil gespült und von diesem über eine flexible Transferleitung In den Einspritzblock des Gas -Chromatographen überführt wird. Die Dosierung über ein Ventil garantiert nicht nur eine exzellente Reproduzierbarkeit, sie hat darüber hinaus den großen Vorteil, daß alle Parameter des Gas - Chromatographen vollkommen unabhängig von der eigentlichen Probenahme sind.
Kontrollmodul
Mit dem Kontrollmodul werden alle Parameter des Probengebers gesteuert. In vier unabhängigen Speichern sind die Bad- und Dosierventiltemperatur, sowie die Probensequenz und die Reihenfolge der Probenflaschen, die Spül- und Dosierparameter einschließlich eventueller Entlüftungsschritte gespeichert und digital abrufbar. Alle einprogrammierten Werte sind gegen Stromausfall gesichert. Zusätzlich wird die jeweilige Position der Probe angezeigt, diese kann extern über BCD Code abgefragt oder bei einem Rechner Integrator mit ausgedruckt werden.
Bedienung
Folgende Parameter können programmiert werden: Bad- und Ventiltemperatur Konditionierungszeit
Analysenzeit
Dosierungen pro Probenflasche Reihenfolge der Probenflaschen Zeiten für Druckaufbau, Entlüftung und Dosierung
Je nach der aufgerufenen Funktion werden die vorprogrammierten Werte angezeigt bzw. geändert.
DANI HSS 3950 HEAD SPACE SAMPLER
Technical Specification
AUTOMATIC HEAD SPACE SAMPLER for fully automatic sequential runs
VIALS
- Number of vials : 24
- Vials material : neutral glass
- Vials volume : 20 ml
10 ml with adaptor
Vials septa : rubber
PTFE coated rubber
- Vials aluminium ring
SAMPLING UNIT
- BATH
- Temperature range : 50 ¸ 150°C
- Accuracy : ± 0.5 to 50°C, ± 1°C at 150°C
- Stability : 0.1°C at 50°C
0.2°C at 150 ° C
- Fluid : Silicon Oil
- Amount : 1.2 Kg
- MANIFOLD
- Temperature range : 50 ¸ 150°C
- Accuracy : ± 5°C
- Stability : ± 1°C
- Electrical heating
- Sampling valve : MV 65/106, 6-ports valve
- Sampling loop : SS, 1 ml volume (standard)
3 ml volume (optional)
- CAROUSEL
- Number of vials : up to 24
PROGRAMMING UNIT
- Microprocessor : 8085, 8 bit
- Number of Methods : up to 4
- METHOD PARAMETERS
P.C. INTERVAL : 00 ¸ 99 min., 1 min. step
BATH TEMP. : 00 ¸ 150°C, 1°C step
MANIFOLD TEMP. : 00 ¸ 150°C, 1°C step
SAMPLING INTERVAL : 00 ¸ 99 min., 1 min. step
SAMPLE NUMBER : 00 ¸ 24
SAMPLE SEQUENCE : 00 ¸ 99 even for number of samplings an the same sample
METHOD SEQUENCE : from 1 to 4 equal or different method repetition
- VALVING
PROBE UP/DOWN : 00.00 ¸ 99 min. 59 sec., 1 sec.
PRESSurization ON/OFF : 00.00 ¸ 99 min. 59 sec., 1 sec.
VENT ON/OFF : 00.00 ¸ 99 min. 59 sec., 1 sec.
VALVE position : 00.00 ¸ 99 min. 59sec., 1 sec.
NUMBER of Status change for each function : 5 (five)
- OPERATION PUSHBUTTONS
START/STOP : to initiate (led lights)
to stop (led blinking)
RESET : to reset to the beginning
RMT : to accept remote start in multisequential runs
UP/DOWN : arrows key to modify numerical values
ADV : manual vial position advancing
SCAN : to check and modify the loaded method parameters
TEST : to check the loaded method valving cycle
LOCK : to protect from accidental modifications
. SYNOPTIC MONITOR
- Valving cycle step indication with leds
- WAIT : temperature conditioning phase to Set value
- P.C. : preconditioning interval operation
- READY : to Start
- AUTOSTART : for automatic Start after ready
- Elapsing time indication during the analytical cycle : 0.00 ¸ 99 min. 59 sec., 1 sec.
- PLATE position indication of the vial number in analysis.
. TEMPERATURE READOUTS
- BATH Temp. : pressing SCAN and DOWN pushbuttons
- MANIFOLD Temp. : pressing SCAN and UP pushbuttons
- ALARMS
- Air failure , bath temperature
- VIAL POSITION IDENTIFICATION
- SIGNAL : BCD output at ID connector
- AUTODIA GNOSIS TEST
Operating at MAIN power ON, it checks
- numerical displays and operative leds
- RAM
- ROM
- Temperature sensors
UTILITIES
- Power supply : 220 V (± 10%), 50 H, 400 VA (2A)
115 V (± 10%), 60 H, 400 VA (3.5A)
- Service Air : 3 bar
DIMENSIONS AND WEIGHT
. SAMPLING UNIT : 410H x 320L x 390W mm - 22 Kg
. PROGRAMMING Unit : 170H x 240L x 470W mm - 6 Kg