Maggiori Informazioni
Objektnummer	B00014612
Seriennummer	014612
Nome oggetto	CDS Pyroprobe 2000
Stato	Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma: CDS

Modell: Pyroprobe 2000

Kommentar: Dokumente engl.

The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.

With an independently temperature programmable interface and probe, the CDS Pyroprobe° 2000 is capable of performing all the functions of the Pyroprobe® 1000 and more. The Pyroprobe® 2000 adds the ability to program up to 5 different temperature ramps with heating rates in degrees per millisecond, second or minnte from 0.01 °C/min to 20,000 °C/sec to a maximum temperature of 1400 °C . This control of the sample allows the user to obtain a complete temperature profile of a sample including headspace, thermal desorption and pyrolysis. Slow heating rates are ideal for thermal evolution studies and programmed pyrolysis with continuous analysis by GC, GC/MS, or FT-IR.

Applications : Multiple step temperature programming permits analyses such as:

Deformulation

Dynamic headspace and pyrolysis of polymers

Sequential pyrolysis

Thermal degradation profiles

Analysis of geochemical samples for fuel potential

Outgassing studies

DESCRIPTION

The CDS Analytical Pyroprobe 2000 is a multiple step, platinum filament pyrolysis Instrument which prepares samples for analysis by gas chromatography, mass spectrometry or FTIR. The microprocessor of the Pyroprobe 2000 controls the temperature of the filament by calculating the resistance of the filament at setpoint temperature and supplying the correct voltage to achieve that temperature. Filaments are available in a variety of designs and sizes, and the Pyroprobe 2000 comes supplied with one ribbon probe, for placing samples directly onto the surface of the filament, and one coil probe, for pyrolysis of samples in a quartz tube. There are three basic modes of Operation: Run, for pyrolysis of the sample in either a single step (like the Pyroprobe 1000) or in a program of several steps; Dry, for removing solvent from a sample deposited as a solution onto the ribbon filament; and Clean, for removing residual material from the filament between runs. In the Pyroprobe 2000, the timen and temperatures for the Dry and Clean features are user selectable.

The Pyroprobe 2000 is interfaced to a gas chromatograph by means of a heated chamber which houses the filament rod during pyrolysis. The temperature of this Interface and the temperature of the pyrolysis filament are independently programmable. Each program may contain up to five steps, and each step includes an initial temperature, a heating ramp and a final temperature. For the pyrolysis filament, the temperatures may go to 1400°C and the

rates may range from 0.01°C/ minute to 20,000°C/second, settable in degrees per minute, second or millisecond. For the interface, temperatures may be set to 350°C at heating rates in degrees per minute. The probe and interface temperatures may be programmed independently of one another, or used in a combined mode. To connect the programming of the interface and the probe, the letter "P" is entered in one step of the Interface program, which causes the probe program to begin at this step. The microprocessor of the Pyroprobe 2000 will store nine completed methods for both the interface and the probe.

In addition to multiple ramp programs, the Pyroprobe 2000 may be used as a single step pyrolyzer, muck like the Pyroprobe 1000. When the Single Step feature is used, there is a single ramp and final temperature for the probe, while the interface remains isothermal.

All programming, temperature selection, calibration and run initiation are performed through the keypad of the Pyroprobe 2000. Pressing the programming step keys will produce displays asking for setpoints. During a run, the actual temperatures for both the probe and interface may be displayed an the screen, or setpoints may be examined in other program steps.

Sample handling, placement, filament rod replacement, interface connection, and expendables such as quartz tubes and seals are the saure for both the Pyroprobe 1000 and the Pyroprobe 2000.

SPECIFICATIONS

FILAMENT TEMPERATURE Settable in 1°C increments to 1400°C

FINAL TIME Settable in units of 0.01 second to 99.99 sec.

HEATING RATE Settable in units of 0.01°C/millisecond from 0.01 to 20.00 (10°C to 20,000°C/second).

INTERFACE TEMPERATURE Settable in 1°C increments to 350°C

DRY MODE 80°C for 1 second

CLEAN MODE 1200°C for 5 seconds

POWER REQUIREMENT 115V, 50/60Hz; 220/240V, 50/60Hz

DIMENSIONS H 14cm, W 44cm, D 33 cm

Gruppo prodotti: GC Accessori diversi

Non è stato trovato alcun prodotto corrispondente alla selezione.