Camag TLC II
Objektnummer | B00011867 |
---|---|
Seriennummer | 011867 |
Nome oggetto | Camag TLC II |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Camag
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Technische Daten
Lichtquellen
Die D2-, W- und Hg-Lampen sind im Gerät eingebaut. Ihre mechanische Umschaltung erfolgt durch den seitlichen Bedienungshebel. Alle 3 Lampen sind strom- und spannungsstabilisiert.
Halogen-Wolframlampe: nutzbares Kontinuum 400 800 nm.
Hg-Hochdrucklampe: Linienspektrum 254 578 nm.
Deuteriumlampe: nutzbares Kontinuum 200 400 nm.
Lampennetzteil
Der Lampennetzteil ist im Scanner eingebaut. Die sich im Strahlengang befindliche Lampe wird automatisch gezündet, wenn das Gerät eingeschaltet wird.
Pilot-Lampe
Die Abbildung des Spaltes wird unabhängig von der Monochromatorstellung mit sichtbarem Licht ausgeleuchtet.
Messabteilbeleuchtung
4 Watt-Lampe: 254 oder 366 nm oder COOL WHITE
Optisches System
Apochromatische Suprasil Flussspat-Optik mit einem Durchlassbereich von 195 800 nm. Umschaltung auf MAKRO- und MIKRO-Abbildung.
Monochromator
Gittermonochromator, Bandbreite umschaltbar 10/30 nm, Wellenlängenbereich 200 800 nm. Schrittmotorantrieb, Genauigkeit 1 nm.
Mess-Spalt
MAKRO 0.25 6 mm. Spaltlänge in 7 Schritten von 0.5 12 mm einstellbar.
MIKRO 0.025 0.6 mm. Spaltlänge in 7 Schritten von 0.05 1.2 einstellbar.
Detektor
Breitbank Photomultiplier, Multialkali-Typ, spektrale Empfindlichkeit 185 800 nm. Ansprechgeschwindigkeit = 0.2 ns.
Messtischbewegung
Antrieb: Für beide Achsen zwei voneinander unabhängige Schrittmotoren. Reproduzierbarkeit 0.1 mm. Auswertung von Zirkularchromatogrammen durch Zirkularmesstisch (Option) mit eigenem Schrittmotorantrieb.
Messtischbewegung manuell:
Mit Schnelltaste: 20 mm/s, bzw. 20 Grad/s.
Ohne Schnelltaste: 1 mm/s, bzw. 1 Grad/s.
Messgeschwindigkeit
Wählbar 0.1 4 mm/s in 0.1 mm Schritten, bzw. 0.1 Grad/s in 0.1 Grad Schritten. Rücklauf unter Programmkontrolle 20 mm/s.
Bei Benutzung der Auswertesoftware CATS sind 0.1 bis 20 mm/s Messgeschwindigkeit möglich.
Netzanschluss
100 V, 120 V, 220 V und 240 V umschaltbar, 50/60 Hz
Leistungsaufnahme
250 W
Stickstoff
Ca. 0.5 bar, 6 L/Min
Analog Ausgang
0 100 mV
Steuerung durch
Z 80 (2.5 MHz)
Ausgänge zur externen Steuerung
Ausgang zur Steuerung des Schreibervorschubs und der Federabhebung (TTL offener Kollektor).
Ausgang zur Ansteuerung von Peripheriegeräten (z. B.: Integrator) TTL offener Kollektor.
Weiteres Zubehör: Ausgang RS 232 für CAMAG PC Auswertesystem.
Eingang
Eingang zur Unterbrechung des automatischen Messablaufs.
Interface
Eingebaut für HP 3390 A, HP 3394 A, SP 4100, SP 4200, SP 4270/90 Merck-Hitachi D-2000/D-2500. HP 3396 A (benötigt Firmware Version 3.15)
RS 232 für CAMAG PC Auswertesystem (ist im Lieferumfang desselben eingeschlossen). Eine Scanner Firmware Version ab 3.14 ist erforderlich.
Gewicht
38 kg
Abmessungen
Breite 570 mm
Tiefe 735 mm
Höhe 360 mm