Behring BCT
Objektnummer | B00014243 |
---|---|
Seriennummer | 014243 |
Nome oggetto | Behring BCT |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Der Behring Coagulation Timer (BCT) besteht aus einem oder zwei Analyser(n), einem Personal Computer und einem Drukker.
Der PC steuert den/die Analyser und verwaltet die Daten. Er kann an einen Host-Rechner angeschlossen werden, welcher Messungen anfordert und Ergebnisse erwartet.
Der Analyser wird mit Proben, Reagenzien und Meßküvetten bestückt.
Die Proben werden in Primärgefäßen in den Probenrotor eingesetzt. Für die gängigen Primärgefäße sind spezielle Adapter (Zentrierringe) erhältlich. Für kleine Volumina stehen spezielle Probencups zur Verfügung. Notfall-proben (STATs) können jederzeit zur bevorzugten Bearbeitung nachbestückt werden.
Der Analyser kann wahlweise probenorientiert oder testselektiv arbeiten. Gemäß der Arbeitsliste werden koagulometrische, chromogene und immunologische Tests mit den Proben durchgeführt. Einzelne Tests können zu Profilen zusammengefaßt werden.
Die Ergebnisse werden in die Arbeitsliste eingetragen, in einer Datenbank gespeichert und, falls konfiguriert, automatisch ausgedruckt. Falls der Analyser an ein Host-System angeschlossen ist, können die Daten an diesen übertragen werden. Nach einer Kalibration kann eine Umrechnung der Rohwerte in Konzentrations- oder Aktivitätseinheiten erfolgen.
Technische Daten
Allgemeine Beschreibung
Behring Coagulation Cups 4 ml Probengefäße mit Eichstrich
Gerätetyp Gerinnungsvollautomat
Anwendung koag. Gerinnungstests:
PT, aPTT, TZ, Fibrinogen, usw. Einzelfaktoren, Protein C,usw.
chromogene Tests:
PT, aPTT,Plasminogen Einzelfaktoren AT III(A),Faktor XIII,usw.
Arbeitsweisen Random Access (proben-orientiert)
Batch (testselektiv)
Notfall
Meßprinzip Photometrisch mit
Magnetrührer zur Homogenisierung des Testansatzes und Steigerung der Empfindlichkeit
Empfindlichkeit PT> 10% d. Norm;
Probendurchsatz PT 185/h; aPTT 70-100/h (abhängig vom Reagenz); PT/aPTT/TT/AT III (A) 35/h
Küvetten-Volumen 150-350 µl
Pipettier-Volumen 2-180 µl
Meßkanäle 2 x 2 Kanäle
Kalibration Auf Anforderung mit Speichern und Darstellen der Referenz-kurven
Notfall Bis zu drei Notfallproben können pro Probenrotor während der Messung eingeschleust und bevorzugt abgearbeitet werden
Analyser
Nachbestückung jederzeit möglich, die Meßreihe wird zur Nachbestückung von Proben unterbrochen (in 3er Gruppen)
Reagenzblock auf 15 °C ± 0,5 °C gekühlte Positionen für Reagenzflaschen (erhöhte Reagenzstab i I ität) :
-10 Positionen für
15 ml Flaschen bzw.
5 ml Flaschen in Adaptern;
davon 2 mit Magnetrührern
- 3 Positionen für
5 ml Flaschen
Reagenzflaschen 5 ml und 15 ml Flaschen
Restvolumen 5 ml Flasche:
- ohne Rührer: 500 µl
- mit Rührer: 800 µl
Restvolumen 15 ml Flasche:
- ohne Rührer: 1300 µl
- mit Rührer:1600 µl
Cupblock 14 Positionen für Cups mit Kontroll- und Mangelplasmen
Probenrotor a) Probenrotor Oa (BFA),
für 75 mm Primärgefäße
(für Proben ohne Barcode):
48 Positionen für Primär‑
gefäße und Cups, davon
- 45 Positionen für Routineproben, Standard-, Kalibrier- und laboreigene Poolplasmen
b) Probenrotor Ob (BFA),
für 100 mm Primärgefäße
(für Proben ohne Barcode):
48 Positionen für Primär‑
gefäße und Cups, davon - 45 Positionen für Routineproben, Standard-, Kalibrier- und labor‑
eigene Poolplasmen
c) Probenrotor 1 ( BCT)
(für Proben mit Barcode):
44 Positionen, davon
- 28 Positionen für Primärgefäße und Cups, inkl. 3 Positionen
für Notfallproben
-16 Positionen für Behring Coagulation Cups ohne Barcode
Probengefäße a) Primärgefäße:
8 ml BD Vacutainer
5 ml Sarstedt Monovette
4,5 ml BDVacutainer
3 ml Sarstedt Monovette
b) Sekundärgefäße:
4 ml Behring Coagulation Cup für pädiatrische Proben Restvolumen: 150 µl Minimales Probenvolumen für eine Bestimmung: 200-250 µl, je nach Testmethode
Meßrotoren 2 parallel arbeitende Meßrotoren, mit:
- je 32 auf 37 °C ± 0,3 °C temperierten Küvettenpositionen,
- geschwindigkeitsgesteuerten Motoren: 100-600 U/min
Photometer Lichtquelle: Halogenlampe 12 V/20 w
Lichtleiter: Glasfaserkabel
Filter: Interferenzfilter 405 nm, 340 nm,620 nm und2 freie Positionen
Küvetten Küvettenrotoren (BFA/BCT Dispo-Systeme) mit 32 Einzelküvetten, die mit Mixern bestückt sind.
Pipettor beweglich in 3 Richtungen (x,y,z),Pipettornadel temperiert auf 37 °C ± 0,3 °C
Dilutor 500 µl Spritze
Kolbenhub: 60 mm Auflösung: 6000 Schritte Schrittweite: 0,01 mm max. Schrittgeschwindigkeit:
4000 Schritte/s
Zeit für einen Vollhub: 1,5 s
max. Spülleistung: 3 ml/s
Gravimetrische Messungen (250 µl Spritze, Schlauch 1,0 mm):
Volumen Unrichtigkeit Vk
% %
3µl +/- 3,0 1,5
10µl +/-1,5 0,5
50 µl +/-1,3 0,2
100 µl +/-1,2 0,15
Spülung passiv, je Spülung mit dest. Wasser (ca. 4 ml)
a) normal
b) intensiv bei thrombinhaltigen Reagenzien
c) Desinfektion
Spülflüssigkeit - Dest. Wasser (normale Spülung)
- Waschlösung (intensive Spülung bei thrombinhaltigen Reagenzien), (100 µl/Zyklus)
- Desinfektionslösung
Abwasserentsorgung kanalisiert (nach Vorlage von Desinfektionsmitteln)
Temperierung Meßrotoren,13 Reagenzpositionen, Pipettornadel
Verbrauchsmaterial Küvettenrotoren mit Mixer
Computer
Typ EPSON Endeavor TM C
CPU (Zentraleinheit) Intel 80486 DX Prozessor, 33 Mhz, 32 Bit
Arbeitspeicher 20 MB
Diskettenlaufwerk 31/2" mit 1,44 MB
Festplatte 270 MB
Monitor TARGATm 1499 NL,
14" VGA Farbmonitor, max. 1024 x 768 Pixel Auflösung
Tastatur alphanumerische Tastatur (PS/2 kompatibel, Typ Marquard)
Maus EPSON Microsoft Maus (PS/2 kompatibel)
Betriebssystem Windows NT 3.5 (dadurch Multitasking und netzwerkfähig)
Software BCT Treiber, BCT 1.0 oder aktuellere Version
Drucker je nach installiertem Druckertreiber
Maße und Gewichte
Analyser 1050 x 513,5 x 526 mm (B x T x H), ca. 60 kg
Computer 370 x 412 x 120 mm (B xT x H), 7,5 kg
Monitor 366 x 386 x 380 mm (B xT x H), 12 kg
Spannung und Leistungsaufnahme
Analyser 115/120/230/240 V (± 10%), Hauptsicherung:
- bei 115/120 V 4 AT
- bei 230/240 V 2 AT 50-60 Hz, 200 VA
Überspannungskategorie: Klasse II
Verschmutzungsgrad: Klasse 2
Computer 90-264 V, 47-63 Hz, 145 W max.
Monitor 120-230 V, +/- 5°/0,50/60 Hz (automatisch), 76 W
Umgebungsbedingungen
Umgebungstemperatur +10 °C bis +30 °C
Relative Luftfeuchtigkeit kleiner 85 %, nicht kondensierend