Beckman CX5CE
Objektnummer | B00013196 |
---|---|
Seriennummer | 013196 |
Nome oggetto | Beckman CX5CE |
Stato | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Gerätespezifikationen der Synchron CX-Serie
Energie- und Standortanforderungen:
Spannung: 220 - 240 V Wechselstrom
Frequenz: 50/60 Hz
Anschluß: 20 A
Wärmeentwicklung: 1760 kcal/Stunde
opt. Umgebungstemperatur: 18°C bis 30°C bei 30°C- und 37°C-Betrieb
relative Luftfeuchtigkeit: 30 % bis 85 % bei 30°C- und 37°C-Betrieb
Wasseranschluß:
Qualität: Deionisiertes Wasser < 1µS
Flußrate: ca. 20 Liter/Stunde
Druck: 2 - 6,2 bar
Temperatur: 15°C - 25°C
Reagenzteil:
Barcode: positive Reagenz-Identifizierung bei BECKMAN COULTERMethoden durch barcodierte Reagenzkartuschen
Reagenzvolumen: CX4 200 - 327 µI
CX1/CX3 0,22 ml - 1,25 ml Reagenz und 6,87 ml Waschlösung
Lagerkapazität: 24 Positionen im Reagenzkarussell (Peltier-Kühlung)
8 Positionen bei Raumtemperatur
Reagenzienstabilität
im Gerät: maximal 30 Tage nach Öffnen oder bis zum Verfallsdatum
Photometerteil:
Typ: Gitter-Monochromator, keine beweglichen Teile
Lichtquelle: gepulste Xenon-Lampe (Blitzlampe)
Detektoren: diskrete Photodiodenanordnung
Wellenlängen: 10 verschiedene Wellenlängen:
340, 380, 410, 470, 520, 560, 600, 650, 670, 700 nm
Physikalische Größen:
|
CX4 |
CX5 |
CX7 |
Terminal |
Keybord |
Höhe |
175 cm |
175 cm |
175 cm |
33,7 cm |
3,81 cm |
Länge |
119 cm |
155 cm |
188 cm |
34,3 cm |
48,9 cm |
Breite |
77 cm |
77 cm |
77 cm |
38,1 cm |
21 cm |
Gewicht |
357 kg |
436 kg |
516 kg |
|
|
Hardware: HP Vectra Konsole
Festplatte: 420 MByte
RAM-Speicher: 12 MByte
486 Mikroprozessor
33 MHz getaktet
Diskettenlaufwerk für 3,5 Zoll Disketten
Software:
deutschsprachige Software
Speicherkapazität für 2000 Proben oder 10.000 Ergebnisse statistisches Qualitätskontrollprogramm für 50 verschiedene Kontrollen
Ablauf
Der SYNCHRON arbeitet im 16 Sekunden-Takt:
10 Sekunden =Stationäre Phase:
- Küvetten werden gewaschen
- Reagenz wird pipettiert und gemischt
- Probe wird pipettiert und gemischt
6 Sekunden = Rotationsphase:
während dieser Zeit findet die photometrische Messung statt; jede Küvette wird bei bis zu fünf verschiedenen Wellenlängen zehn mal gemessen. Von diesen zehn Messungen werden die Erste und die Letzte verworfen (Abbremsen und Anfahren des Küvettenkarussells)
Anzahl der max. möglichen Extinktionswerte:
- pro Küvette:
8 "Blitze" x 5 Wellenlängen = 40 Messungen
- alle Küvetten:
40 Messungen pro Küvette x 80 Küvetten = 3200 Messungen
Küvettenreinigung
Die Küvettenwaschstation hat sechs Positionen, die Küvetten werden immer paarweise bearbeitet.
Position 1 und 2 entfernen das Reaktionsgemisch aus den Küvetten und füllen sie mit 1:143 verdünnter Waschlösung.
Anschließend entfernen Position 3 und 4 die Waschlösung und füllen dest. Wasser ein, so daß im anschließenden Rotationszyklus der Küvettenleerwert bei 5 verschiedenen Wellenlängen gemessen werden kann.
Position 5 und 6 entfernen das dest. Wasser und wischen die Küvetten trocken. Wenn die Küvetten den Leerwerttest bestanden haben, sind sie wieder einsatzbereit. Wenn sie den Leerwerttest nicht bestanden haben,
Wichtige Meldung vom CX4
Küvetten-Wasser/Leerwert-Test nicht erfolgreich
dann werden sie nicht zur Messung herangezogen und automatisch wieder in den nächsten Küvettenwaschzyklus miteinbezogen. Die Position dieser Küvette ist in <F8> GERÄTE - PARAMETER aufgeführt.