Soldé

Hermle Z 323

Seriennummer: 004232
Status: Archived Product
Preis auf Anfrage
Excl. 19% VAT , excl. Shipping Cost
siehe Storeview
Descrizione:
Hermle tavolo centrifuga Modello Z 323. Velocità massima:. 17.000 giri / min. RCF max:. 27,464 xg. Senza rotore. NUOVO! Garanzia del produttore s
Quotation
siehe Storeview
Maggiori Informazioni
Objektnummer B00004232
Seriennummer 004232
Nome oggetto Hermle Z 323
Stato Archived Product

Gruppo prodotti: Centrifughe diverse

Non è stato trovato alcun prodotto corrispondente alla selezione.

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

 

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

 

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

 

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country

Possible payment methods

Comment

DE, AT, CH

Payment by invoice, payment in advance, payment by credit card

Payment by invoice is only possible for corporate clients.

NL, BE, LU

Payment by invoice, payment in advance, payment by credit card

Payment by invoice is only possible for corporate clients

Other countries

Payment in advance, payment by credit card

 

 

Our General Terms of Sale, Delivery and Payment are valid and are available for download here. 

The goods are offered subject to prior sale.

 

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status

Condition

Comment

Immediately available

Used The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock

Used

The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.

Published

Used

The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.

New device

new

The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.

Labprocure

Used

Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma:              Hermle

Modell:                         Z 323

Kommentar:     Dokumente

Durch ihr großes Zubehörprogramm sind die beiden Modelle Z 323 und Z 323 K universell einsetzbar.

Eigenschaften

Beide Modelle sind mit einer komfortabten Mikroprozessorsteuerung ausgestattet. Drehknöpfe für Drehzahl-, Bremse-, Zeit-, und Temperaturvorwahl sorgen für eine einfache und ergonomische Bedienung. Der bürstenlose Induktionsantrieb verleiht den Zentrifugen eine hohe Laufruhe, erzeugt keinen schwarzen Kohlestaub und ist wartungsfrei.

Beschleunigungs- und Bremszeiten sind sehr kurz. und auf jeden Rotortyp abgestimmt. Die Bremskraft kann in 10 Stufen vorgewählt werden, wodurch auch ein Sanftauslauf möglich ist Für genau reproduzierbare Routineläufe stehen 10 Programmspeicherplätze zur Verfügung. Dort können alle Laufparameter abgespeichert werden; der Rotortyp wird automatisch mit in den Speicher übernommen.

Z 323

Ein stetiger Luftstrom durch das Gehäuse sorgt bei dieser luftgekühlten Zentrifuge für eine sehr niedrige Probenerwärmung während der Zentrifugation. Bezogen auf Raumtemperatur ist die Erwärmung beim Mikroliterrotor (24 x 1,5 ml) +10°C. Zwischen den einzelnen Läufen sorgt ein integrierter Lüfter für die nötige Abkühlung.

Das formschöne Metallgehäuse verkörpert nicht nur ein ansprechendes Design, sondern auch die gewohnte Hermle Sicherheit.

Bedienoberfläche

Das Bedienschild bietet einen guten Überblick über den eingestellten Soll-Wert, sowie den aktuellen Laufparametern.

Die Drehzahl kann mit dem linken Drehknopf in 500 min -1 Schritten, mit dem rechten Drehknopf in 10 min -1 Schritten vorgewählt und jederzeit auf RZB Wert umgeschaltet werden. Auch mit Röhrchengestellen und Adapter kann der korrekte RZB Wert angezeigt werden.

Nach Laufende bleiben die eingestellten Laufparameter erhalten.

Vielseitiger Einsatz

Das breite Rotorenprogramm macht's möglich:

  • 4-Platz Ausschwingrotor mit hermetisch verschließbaren Rundbechern für 100 ml oder 4 x 15ml und Höchstdrehzahl 5000 min -1 bzw. 3910 x g
  • 6-Platz Winkelrotor für je 85 ml mit Höchstdrehzahl 13500 min -1 /20980 x g
  • 24-Platz Mikroliterrotor mit Höchstdrehzahl 17000 min -1 /26810 x g

Bedienvorteile

  • Drehzahleingabe in 10 min -1 und 500 min -1 Schritten
  • Laufzeitvorwahl zwischen 1 und 60 Minuten oder Dauerlauf
  • Restzeitanzeige
  • Radiuskorrektur beim Einsatz von Adaptern oder Röhrchengestellen möglich
  • Bremskraft in 10 Stufen vorwählbar
  • Anzeige und Vorwahl der Probentemperatur
  • Quick-Taste für Kurzzeitläufe mit Sekundenanzeige
  • Automatisches Vorkühlprogramm "precool"
  • Automatische Rotorerkennung
  • 10 Programmspeicherplätze
  • Softwareintegrierte Fehlerdiagnose
  • Fehlermeldung bei Unwuchtabschaltung
  • Temperaturvorwahlbereich -10°C bis +40°C

Leistungsdaten

Drehzahl max.             17.000 min -1

RZB max.                   26.810xg

Volumen max.             4x100ml

Abmessung

Gerät (B/H/T)             39/37/55 cm

Gewicht                     44kg

Spannung                  Bestellnummer

220V/50-60Hz           278.00V01

120V/50-60Hz,          278.00V02


Rotoren                                            Max.Drehzahl       Max.RZB           Bestellnummer

Ausschwingrotor 4 x 100 ml 5000 min -1                            3910 x g              220.72 V04

Mikroliterrotor 2x 3 Platten                3500 min -1               1500 x g              220.50 V05

Winkelrotor 6 x 50 ml                        6000 min -1               3960 x g              220.82 V01

Winkelrotor 10 x 15 ml Falcon           6000 min -1               4300 x g              220.84 V02

Winkelrotor 10 x 15 ml                      6000 min -1               4300 x g              220.84 V0l

Winkelrotor 24 x 15 ml                      3500 min -1               2000 x g              220.81 V05

Haematokritrotor, 24 Kapillaren         12500 min -1             17700 x g            220.89 V01

Winkelrotor 6 x 85 ml                        13500 min -1             20980 x g            220.78 V02/V03*)

Winkelrotor 8 x 50 ml                        13500 min -1             19350 x g           220.80 V02/V03*)

Winkelrotor 8 x 30 ml                        13500 min -1             19150 x g           229.76 V02/V03*)

Winkelrotor 12 x 12 ml                      13500 min -1             19960 x g            220.85 V01/V02*)

Mikroliterrotor 24 x2,0/1,5 ml            17000 min -1                 26810 x g .           220.87 V01/V02*)

Mikroliterrotor 24 x 2,0/1,5 ml           13500 min -1             17310 x g            220.59 V06

Mikroliterrotor 44 x2,0/1,5 ml            13500 min -1             17110 x g            220.88 V01

Mikroliterrotor 64 x 0,5 ml                 13500 min -1             16700 x g            220.92 V0l

* Hermetisch dichte Version

Part of labexchange logo
Search engine powered by ElasticSuite