manufacturer:   Agilent

model:              1200 Cap

The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.

Because this is a modular system, only an example of a possible configuration is shown!

Agilent 1200 Series HPLC

• Uncompromised data quality for complete confidence in your results
• Modular and scalable platform to meet your separation requirements
• Easy maintenance and intelligent system monitoring for increased uptime
• Scalable and open software architecture
• Complete qualification portfolio for highest level of operation

Uncompromised data quality

for results you can rely on

Excellent flow and composition precision

Whether you run isocratic or gradient analyses the Agilent pumping systems are always the right choice. Agilent’s proven pump design provides excellent flow and composition precision over a wide flow rate range. The patented variable stroke minimizes composition ripple to ensure a smooth baseline and high sensitivity.

Superior injection precision and lowest carryover

The selection of different autosamplers provides for precision levels of < 0.5 % RSD over an injection volume range from 0.01 μL to 2000 μL. The unique flow-through design, combined with external needle wash and optional multiple wash solvents, virtually eliminates carryover, even for highly adsorptive compounds.

Ultimate UV-visible detection sensitivity

New low-noise flow cells and electronics provide maximum sensitivity and baseline stability. Electronic temperature control ensures baseline stability under fluctuating ambient temperature and humidity conditions.

Scalable solutions

for future expandability and adaptability

Manual isocratic LC system

Workhorse for demanding QA/QC applications:

• Industry standard for high performance isocratic LC
• Easy and fast maintenance
• Flow rates up to 10 mL/min for a wide range of column dimensions and applications
• Upgrade options from isocratic up to automated quaternary LC system

Automated quaternary LC system

For a wide range of method development and routine gradient applications:

• Greatest flexibility for multi-solvent gradients up to 4 solvents
• Flow rates up to 10 mL/min support both standard-bore and semipreparative applications
• Wide selection of autosamplers for full flexibility in injection volumes and sample containers

Automated binary LC system

For research, high-throughput and fast applications:

• High pressure mixing for superior gradient performance even at lower flow rates
• Optimized delay volumes for fast chromatography
• Flow rates from 0.05 to 5 mL/min provide ideal support for narrow-bore and standard-bore applications

Overview of 1200 Series HPLC Modules

Solvent Preparation

Vacuum Degasser

Flow rate: Up to 10 mL/min

Internal Volume: 12 mL per channel

Micro Degasser

Flow rate: Up to 5 mL/min

Internal Volume: 1 mL per channel

Solvent Delivery

Isocratic Pump

Flow range: 0.001–10mL/min*, for isocratic analysis

Quatenary Pump

Flow range: 0.001–10mL/min*, for gradient analysis (requires degasser)

Binary Pump

Flow range: 0.001–5 mL/min*, for fast gradient analysis

*(settable flow range)

Injection Systems

Manuel Injector

Injection range: Loops for 5μL–20mL

Standard Autosampler*

Injection range: 0.1μL–100μL (extendable up to 5000 μL)

Sample container: Vials

High Performance Autosampler*

Injection range: 0.1 μL–100 μL (extendable up to 1500 μL)

Sample container: Vials and well-plates

*(Also available with thermostat with temperature range 4–40°C)

Column compartment

Thermostatted Column Compartment

Temperature range:

10 degrees below ambient to 80 °C

Valves

Internal Valves

(built into column compartment)

2-position/6-port valve

2-position/10-port valve

External Valves

2-position/6-port valve

2-position/10-port valve

Detectors

Variable Wavelength Detector

for programmable single wavelength analysis, 1 signal, 20 Hz data sampling rate

Multiple Wavelength Detector

for multi-wavelength analysis, 8 signals, 20 Hz data sampling rate

Diode Array Detector

for multi-wavelength and spectral analysis, 8 signals, 20 Hz data sampling rate

Fluorescence Detector

for multi-signal detection with rapid online scanning and spectral data analysis

Refractive Index Detector

for refractive index range:

1.00–1.75 RIU, calibrated

Evaporative Light Scattering Detector

Flow rate: 5 μL/min – 5 mL/min

For peak widths of 1 second or larger

6000 Series LC/MS Systems

6100 Series Quadrupole LC/MS Systems (illustrated)

6200 Series Accurate-Mass TOF LC/MS Systems

6300 Series Ion trap LC/MS Systems

6400 Series Triple Quadrupole LC/MS Systems

6500 Series Accurate-Mass Q-TOF LC/MS Systems

LC columns, supplies and services

Unparalleled quality and flexible choices within the ZORBAX LC column family

Maximize system performance and reliability for all your separation needs by combining the Agilent 1200 Series HPLC system with Agilent ZORBAX LC columns and LC supplies.

Designed with the same attention to detail, quality and superior performance you have come to expect from Agilent instruments and backed by over 30 years of chromatography experience, you can count on Agilent’s columns and supplies to deliver the high quality results you need and expect, time after time.

• Wide selection of chemistries – Eclipse Plus, Eclipse XDB, StableBond, Extend, Bonus, HILIC and more
• Superior flexibility and product scalability with a wide range of particle sizes (1.8, 3.5, 5 and 7 μm) and column dimensions
• Individual column performance reports to document column-to-column and lot-to-lot reproducibility
• Superior particle strength for even the most demanding high pressure applications

Gruppo prodotti: HPLC